Thanks for the tip! I'm lowered on swifts at the moment but plan on getting coils after picking up the wheels.

how well will a 19x10-2 and 19x11-7 work? slammed on coils but looking to raise to where theres no gap but tire showing my only concerned is that im going to have to stretch the front tire which im trying to avoid trying to go more function. heres how the car sits
this was with F14
http://farm8.staticflickr.com/7371/1...04d2ae58_c.jpg
Downtown3 by Nemo210nem07, on Flickr


and heres it now

http://farm6.staticflickr.com/5539/1...8fb8ea04_c.jpg
stockwheels by Nemo210nem07, on Flickr

im going with hankook V12 im trying to get little to no stretch on tires

wasn't a huge fan of the 13's originally, but i think those ray's look sick now.

Anyone running 20x10+10 and 20x11+5?
I'm thinking about running these with possibly 265/30/20 and 296/25/20.

Will I rub? What kind of camber am I looking at "trying" to run this setup? Any insight would help!

ok ive read through here but there are so many posts its hard to find. I have stock nismo wheels and looking to get new rear tires. want to go to a 295 width but the only sidewall they offer on that is a "30" and the stock tire is "35" will there be any bad affects by going with a shorter sidewall?

Your speedo will be off a bit, but not much else. I'm running 255/35/19--295/30/19 with no adverse effects.

No big affect on tread life either?

Not that I have noticed, but mine is a weekend toy so it doesn't get many miles.

Hi, I have a 370z sport package, I picked up some 18'' rims to replace the 19'' rims because 18'' tires are alot cheaper for track days, my problem is with the massive brake kit, the front brakes rub on the barrel or ''hoop'' of the rim. I am looking to push the rim out 3mm with a spacer and pick up extended studs to be safe. My mains concerns are if i need to maintain a certain space between the rim and the brakes. Fortunitally if I push the rim out far enough I will clear the brakes, 3mm should be enough. Also Will 18's negatively affect my car at all?

This is why searching and doing PROPER research on a forum is rewarding. I like your setup now that you're lowered but, at stock height that is a tad bit aggressive for me :( That appears to be about 5-10mm of poke at stock height. I don't want that and am not looking to lower my Z (been there, done that on my G35). I was looking to grab a set of Forgestars in the same specs you have and now... I probably won't.

Wheel fitment at stock height is discouraging for me lol
I may just leave the stock wheels alone :eek:

EDIT:( yeah my mind set has changed lol I can live with this look now)

hey guys, will the base 18x9 +15 offsets fit up front? i am looking to square my car up and save money on tires, too. i am just worried because the lowest offset i have seen on 18x9 is in the low 20's.

Was wondering the fitment, how much rolling or camber I would need for:

F:19×9.5 +3mm
R:19×10.5 +1mm

Haven't been able to find example pics. Thanks in advance!

Depends on how low you want to go and what size tires you want to run. My setup is 19x9.5+20--19x10.5+0---255/35/19--295/30/19 lowered on swifts and I have tons of room.

i have a question too guys... i can decide if go with an 18" or 19" wheel... but if i go with 18" wheels im going to buy the Enkei RPf01 in 18x9.5 & 18x10.5 +15 all around. That size and offset will clear my Akebono breaks??

Thanks!!!

Maybe you are going to tell use the search bar but i can find too much info about this wheels on a 370z lol!!!

That's gonna be an aggressive setup, especially with little to no stretch. What tire sizing do you want to run? I'd say that's hard to do with a low camber.