The "Will it fit?" thread

KaienZ34 · 02-05-2013, 08:57 PM

A friend has a 350 and he wants to buy rims and tires. He wants all the same size tires so he can rotate them. I think he wants all of the rims with the same offset and put spacers in the rear so they're not tucked under. Something like 18x9 front and rear with stock height.

chrischhorn · 02-06-2013, 02:13 AM

Quote:

Originally Posted by KaienZ34

A friend has a 350 and he wants to buy rims and tires. He wants all the same size tires so he can rotate them. I think he wants all of the rims with the same offset and put spacers in the rear so they're not tucked under. Something like 18x9 front and rear with stock height.

Check the My350z.com forum. Offsets on the 370 to the 350 are completely different. Most guys on here won't be able to inform your friend.

jaytwitch · 02-19-2013, 07:07 PM

I have 19" rays, I want to get 20mm spacers all around and swift springs, I should have no problem with rubbing!??
Thank you!

LMBmikeZ · 02-19-2013, 07:44 PM

your good to go no rubbing

Jbwrecked · 03-01-2013, 10:13 PM

Can't find what I'm looking for so I was wondering how an 18x9.5 +15 would work out up front if I'm planning on going with a 275 up front. I know I may need to jump down to a 265 but dont really wanna go to a 255. I am stock height right now but will be on Swifts without a doubt soon. Stock camber as well. Any suggestions/ideas/pictures of this setup actually working?? Thanks guys!

daisuke149 · 03-01-2013, 10:29 PM

275 up front on a +15 = you'd need camber...
265 you'd need camber..

you need at minimum 25 offset. and then a tire that isnt as wide as other manufacturers or rounded. I ran a conti DW 275 on a + 27 offset oem camber and suspension could have done a 285 i think. but if you get like a michelin tire you'd prolly need a + 30 to run a 275.

Jbwrecked · 03-02-2013, 01:31 AM

Damn that's what I was afraid of.
I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh.

daisuke149 · 03-02-2013, 09:57 AM

Quote:

Originally Posted by Jbwrecked

Damn that's what I was afraid of.
I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh.

the front fender could be rolled and you could squeeze a 265 in there maybe... maybe. I dont think you'd have to pull.

Id rather spend the money on front camber arms than pull or roll tho.

Jbwrecked · 03-02-2013, 12:48 PM

Quote:

Originally Posted by daisuke149

the front fender could be rolled and you could squeeze a 265 in there maybe... maybe. I dont think you'd have to pull.

Id rather spend the money on front camber arms than pull or roll tho.

Good point. Thanks for all the info. I might just stick to getting some +30 offset wheel, same sizes, and run spacers all around. That way I can run pretty much whatever I please. Thanks again!

asdfsammich · 03-02-2013, 10:58 AM

Hey guys. I'm dropped on swifts and thinking of going with Work Kiwami.

Front
9.5 +25
AD08 265/35

Rear
11 +18
AD08 305/30

I'm hoping it fits with no issues, flush but no poke, while continuing to be near +/- the outer range of stock camber specs.

I have a rear spc kit installed and will get the front arms if needed for more camber adjustability.

Will it fit?

Phone Tapatalk *nix ...

rAiN · 03-02-2013, 11:48 AM

19x10 +15
19x11 +15

what size tires to get with these offsets?

chrischhorn · 03-02-2013, 11:15 PM

Quote:

Originally Posted by rAiN

19x10 +15
19x11 +15

what size tires to get with these offsets?

SUPER stretch on the front. 245/40 with a minimum of -3 degrees camber IF you are lucky. Rears you can do whatever you want.

anthony909 · 03-03-2013, 01:39 PM

Hey guys just ordered some meisters with the following offsets.

19.9.5 +17 F(Adding 5mm spacer putting me at +12)
19x11.0 +0 R

Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes..

Thanks!

cavemancan · 03-03-2013, 07:15 PM

Front: 275/35/19 - 26.6 diameter (its listed as a rear only tire but I'm not sure if that matters???)
Rear: 285/35/19 - 26.9 diameter

Similar diameter sizes as stock...within 0.3 inches...Just wider

Will these tires sizes fit on the stock rays?

cavemancan · 03-04-2013, 10:49 AM

Quote:

Originally Posted by cavemancan

Front: 275/35/19 - 26.6 diameter (its listed as a rear only tire but I'm not sure if that matters???)
Rear: 285/35/19 - 26.9 diameter

Similar diameter sizes as stock...within 0.3 inches...Just wider

Will these tires sizes fit on the stock rays?

02-19-2013, 07:44 PM	#4 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	your good to go no rubbing __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

03-01-2013, 10:13 PM	#5 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 13	Can't find what I'm looking for so I was wondering how an 18x9.5 +15 would work out up front if I'm planning on going with a 275 up front. I know I may need to jump down to a 265 but dont really wanna go to a 255. I am stock height right now but will be on Swifts without a doubt soon. Stock camber as well. Any suggestions/ideas/pictures of this setup actually working?? Thanks guys! __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

03-02-2013, 01:31 AM	#7 (permalink)
Jbwrecked Base Member Join Date: Nov 2012 Location: SA Posts: 240 Drives: 2009 Nissan 370z Rep Power: 13	Damn that's what I was afraid of. I guess either ill look for a smaller tire for now or look into a different set of wheels. You think maybe a front fender pull would work? It'd need a bit of pull huh. __________________ N/A Solid Red 2009 370z DD - Work Emotion CR-Kai 19x10.5 +22 19x11 +18 - Clutch Helper Spring - NEED MOAR MODZ! 1/4 Mile 13.56 @108.38

03-03-2013, 07:15 PM	#14 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 250	Tire fitment on Stock Sport Rays Front: 275/35/19 - 26.6 diameter (its listed as a rear only tire but I'm not sure if that matters???) Rear: 285/35/19 - 26.9 diameter Similar diameter sizes as stock...within 0.3 inches...Just wider Will these tires sizes fit on the stock rays? __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling. Last edited by cavemancan; 03-03-2013 at 07:25 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-05-2013, 08:57 PM	#1 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 178	A friend has a 350 and he wants to buy rims and tires. He wants all the same size tires so he can rotate them. I think he wants all of the rims with the same offset and put spacers in the rear so they're not tucked under. Something like 18x9 front and rear with stock height.

02-19-2013, 07:07 PM	#3 (permalink)
jaytwitch Base Member Join Date: Nov 2011 Location: Mission Posts: 60 Drives: 2011 370z Sport Rep Power: 14	I have 19" rays, I want to get 20mm spacers all around and swift springs, I should have no problem with rubbing!?? Thank you!

03-01-2013, 10:29 PM	#6 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 32	275 up front on a +15 = you'd need camber... 265 you'd need camber.. you need at minimum 25 offset. and then a tire that isnt as wide as other manufacturers or rounded. I ran a conti DW 275 on a + 27 offset oem camber and suspension could have done a 285 i think. but if you get like a michelin tire you'd prolly need a + 30 to run a 275.

03-02-2013, 10:58 AM	#10 (permalink)
asdfsammich Enthusiast Member Join Date: Dec 2011 Location: Southern California Posts: 456 Drives: 09 370Z SR MT Rep Power: 14	Hey guys. I'm dropped on swifts and thinking of going with Work Kiwami. Front 9.5 +25 AD08 265/35 Rear 11 +18 AD08 305/30 I'm hoping it fits with no issues, flush but no poke, while continuing to be near +/- the outer range of stock camber specs. I have a rear spc kit installed and will get the front arms if needed for more camber adjustability. Will it fit? Phone Tapatalk *nix ...

03-02-2013, 11:48 AM	#11 (permalink)
rAiN Track Member Join Date: Jan 2009 Location: va Posts: 721 Drives: 2012 370z mt Rep Power: 18	19x10 +15 19x11 +15 what size tires to get with these offsets?

03-03-2013, 01:39 PM	#13 (permalink)
anthony909 Base Member Join Date: Aug 2010 Location: CA Posts: 138 Drives: 2010 370zzzzz Rep Power: 15	Hey guys just ordered some meisters with the following offsets. 19.9.5 +17 F(Adding 5mm spacer putting me at +12) 19x11.0 +0 R Curious on what tire size I should be running. I know camber is a must since I'm already lowered so I'm not worried about that part at all. Just not sure about the tire sizes.. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM