The "Will it fit?" thread

jappyjapz · 12-14-2011, 12:13 AM

just bought a set of used wheels, 19*10.5 +7 fr (245 tyres) and 19*11.5 +17 r (255 tyres) will they fit nicely? do I need to do negative camber? I'm planning to drop my car on coilover.

Ni55anPat · 12-14-2011, 12:17 AM

you def could have gone wider in the rear.....i had a +0 offset and fit a 305/30 no problems...but i was on a 10.5 wheel....still u have alot more room then a 255 man..

KaienZ34 · 12-14-2011, 08:53 AM

Quote:

Originally Posted by jappyjapz

just bought a set of used wheels, 19*10.5 +7 fr (245 tyres) and 19*11.5 +17 r (255 tyres) will they fit nicely? do I need to do negative camber? I'm planning to drop my car on coilover.

OMG...that's some skinny tires. Are you going for hellaflush? Don't ever hit the gas or you will go sliding all over and maybe even spin out. A lot of people run 265 front and 305 rear. With wheels that wide even a 305 will be a bit stretched in the rear.

Csquared · 12-30-2011, 02:20 AM

I got a set of the Advan grade Rims off a member here that are
20x10 +20. All the rims are the same size.

The tire shop I am at refuses to put tires on my rims because he claims that they are not going to work. As in I'll be rubbing badly when I am am full lock. Also saying that I will have the rims poking out a lot. In the front.

Planning on going 275/30/20 in the front at stock height. Will I be fine? He said that if I insisted he will do it but i won't get any money back if it doesn't work.

Thanks in advance.

KaienZ34 · 12-30-2011, 08:25 AM

Quote:

Originally Posted by Csquared

I got a set of the Advan grade Rims off a member here that are
20x10 +20. All the rims are the same size.

The tire shop I am at refuses to put tires on my rims because he claims that they are not going to work. As in I'll be rubbing badly when I am am full lock. Also saying that I will have the rims poking out a lot. In the front.

Planning on going 275/30/20 in the front at stock height. Will I be fine? He said that if I insisted he will do it but i won't get any money back if it doesn't work.

Thanks in advance.

Check his setup out. 20x11 with 285's up front and 20x13 345's in the rear.

Fitment Factory 20x13

W.O.W. 370Z · 12-30-2011, 09:43 AM

Quote:

Originally Posted by Csquared

I got a set of the Advan grade Rims off a member here that are
20x10 +20. All the rims are the same size.

The tire shop I am at refuses to put tires on my rims because he claims that they are not going to work. As in I'll be rubbing badly when I am am full lock. Also saying that I will have the rims poking out a lot. In the front.

Planning on going 275/30/20 in the front at stock height. Will I be fine? He said that if I insisted he will do it but i won't get any money back if it doesn't work.

Thanks in advance.

275/30/20 will fit. I had that on for 2 weeks before I went with 285.

I can full lock with 285 and no rub.

I willing be selling my 275/30/20 soon.

Sent from my SPH-D710 using Tapatalk

delusional · 12-30-2011, 06:51 PM

I was thinking of running a square setup. 18x10.5 +22 all around. would it fit? and what tires size should I be running? I'm currently not lowered but looking to throw on some eibachs or swifts in the near future. also what's our center bore size?

Volk Z · 01-02-2012, 04:31 PM

Quote:

Originally Posted by delusional

I was thinking of running a square setup. 18x10.5 +22 all around. would it fit? and what tires size should I be running? I'm currently not lowered but looking to throw on some eibachs or swifts in the near future. also what's our center bore size?

You may be dissapointed with this look... The front will end up looking pretty nice and be very aggressive and the rear will be sunk in... To match that front i would say you would need a 10.5 +0...

THe distance from the rotor to out to be flush with the fender is different on the front and rear... You may want to get a 20 MM spacer for the rear.

You will see what i mean when you put these wheels on.

Tire sizes for a 10.5 depends on what you like
255- Super stretched
265- Stretched
275-285 Slightly stretched
295-305 Squared look

delusional · 01-03-2012, 06:12 PM

Quote:

Originally Posted by Volk Z

You may be dissapointed with this look... The front will end up looking pretty nice and be very aggressive and the rear will be sunk in... To match that front i would say you would need a 10.5 +0...

THe distance from the rotor to out to be flush with the fender is different on the front and rear... You may want to get a 20 MM spacer for the rear.

You will see what i mean when you put these wheels on.

Tire sizes for a 10.5 depends on what you like
255- Super stretched
265- Stretched
275-285 Slightly stretched
295-305 Squared look

i see. i already have a set of 25mm spacers for my rear stock wheels. so i guess i can throw those on if they're too sunk. thanks for the help man

Volk Z · 01-03-2012, 08:08 PM

Quote:

Originally Posted by delusional

i see. i already have a set of 25mm spacers for my rear stock wheels. so i guess i can throw those on if they're too sunk. thanks for the help man

Absolutely! The 25MM spacer would be perfect actually! And glad I could help... That's what the forums are for!

-Chad

Csquared · 01-03-2012, 08:36 PM

thanks guys for the help. Will be putting on my tires soon!

symple84 · 01-03-2012, 09:00 PM

Just got wheels which are 19X9.5 +15 and 19X11 +11.... will these offsets sit flush and what tires sizes should I run for a semi stretched setup

Volk Z · 01-05-2012, 02:09 PM

Quote:

Originally Posted by symple84

Just got wheels which are 19X9.5 +15 and 19X11 +11.... will these offsets sit flush and what tires sizes should I run for a semi stretched setup

Way to pick widths and offsets!! I would almost say personally you couldn't have really gotten much better offsets... Maybe a 11 width +5 offset but very minimal difference.

Semi stretched I would go 255-35-19 on the 9.5 and a 285-35-19 on the 11... This is if you want stretched. If you google Volkdb350z and see my blue Z you will see my Gloss black TE37s (9.5 with a 255 and a 10.5 with a 275) the 275 should be a similar look to the 285-35-19 on an 11 inch width so looking at my 350z u should get a good visual of how the tire will look.

If you want more of a stretch. Go 245-40-19 and 275-35-19 rear.

Goodluck!

symple84 · 01-05-2012, 06:37 PM

Thanks for the feedback I got good advice from a friend for the offsets. The rear is actually +10 it was a typo.

Volk Z · 01-05-2012, 07:57 PM

Quote:

Originally Posted by symple84

Thanks for the feedback I got good advice from a friend for the offsets. The rear is actually +10 it was a typo.

Nice, that 1MM will make a huge difference... Lol

Well goodluck with the tire choices hopefully I gave you enough info.

12-30-2011, 06:51 PM	#322 (permalink)
delusional Track Member Join Date: Feb 2011 Location: NewYork Posts: 968 Drives: 09 PG T/S/N 7AT Rep Power: 15	I was thinking of running a square setup. 18x10.5 +22 all around. would it fit? and what tires size should I be running? I'm currently not lowered but looking to throw on some eibachs or swifts in the near future. also what's our center bore size? __________________ 2009 Platinum Graphite Touring [ Sport Package ¦¦ Navigation ¦¦ 7 Speed Automatic ] [ Berk ¦ H&R ¦ ONEighty ¦ K&N ¦ Stillen ¦ Eibach ¦ Cobb ¦ Ichiba ¦ Hankook ] Last edited by delusional; 12-30-2011 at 06:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 01:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-27-2010 12:35 AM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 02:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 10:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 10:30 AM

12-14-2011, 12:13 AM	#316 (permalink)
jappyjapz Base Member Join Date: Oct 2011 Location: Los Angeles Posts: 24 Drives: 09 370Z W AT Rep Power: 14	just bought a set of used wheels, 1910.5 +7 fr (245 tyres) and 1911.5 +17 r (255 tyres) will they fit nicely? do I need to do negative camber? I'm planning to drop my car on coilover.

12-14-2011, 12:17 AM	#317 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,831 Drives: Zed Rep Power: 18	you def could have gone wider in the rear.....i had a +0 offset and fit a 305/30 no problems...but i was on a 10.5 wheel....still u have alot more room then a 255 man..

12-30-2011, 02:20 AM	#319 (permalink)
Csquared Enthusiast Member Join Date: Mar 2010 Location: Hong Kong Posts: 302 Drives: 09 Nissan 370z Y 7sp Rep Power: 15	I got a set of the Advan grade Rims off a member here that are 20x10 +20. All the rims are the same size. The tire shop I am at refuses to put tires on my rims because he claims that they are not going to work. As in I'll be rubbing badly when I am am full lock. Also saying that I will have the rims poking out a lot. In the front. Planning on going 275/30/20 in the front at stock height. Will I be fine? He said that if I insisted he will do it but i won't get any money back if it doesn't work. Thanks in advance.

01-03-2012, 08:36 PM	#326 (permalink)
Csquared Enthusiast Member Join Date: Mar 2010 Location: Hong Kong Posts: 302 Drives: 09 Nissan 370z Y 7sp Rep Power: 15	thanks guys for the help. Will be putting on my tires soon!

01-03-2012, 09:00 PM	#327 (permalink)
symple84 Enthusiast Member Join Date: Dec 2010 Location: Miami, FL Posts: 451 Drives: 11 PW 370Z Rep Power: 15	Just got wheels which are 19X9.5 +15 and 19X11 +11.... will these offsets sit flush and what tires sizes should I run for a semi stretched setup

01-05-2012, 06:37 PM	#329 (permalink)
symple84 Enthusiast Member Join Date: Dec 2010 Location: Miami, FL Posts: 451 Drives: 11 PW 370Z Rep Power: 15	Thanks for the feedback I got good advice from a friend for the offsets. The rear is actually +10 it was a typo.