Nissan 370Z Forum - The "Will it fit?" thread

Does anyone know if I can run 295/30R19 on the rears of my setup?

I have 19x10.5 +12 (+7mm spacer) wheel on the rear.
Eibach lowering springs

Does anybody know if that size tyre could fit?

jchammond

10-31-2018 05:05 AM

Quote:

Originally Posted by shadow85 (Post 3795927)

Does anyone know if I can run 295/30R19 on the rears of my setup?

I have 19x10.5 +12 (+7mm spacer) wheel on the rear.

Does anybody know if that size tyre could fit?

They will fit & your camber will determine if they poke or not. Only a 26.1” diameter tyre,,,,pending mfg. :tup:

shadow85

10-31-2018 06:43 AM

Quote:

Originally Posted by jchammond (Post 3795928)

They will fit & your camber will determine if they poke or not. Only a 26.1” diameter tyre,,,,pending mfg. :tup:

I forgot to mention i am on eibach lowering springs.

OptionZero

10-31-2018 11:59 AM

Absolutely fits

10.5 +5 extends 4 mm out more than my 12.0 +20

I fit 315’s with room to spare at around -2 camber

If u have adjustable arms in the rear its easy

CM370z

11-02-2018 05:12 PM

Quote:

Originally Posted by CM370z (Post 3794843)

Got another one for y'all:

FRONT: 19x10 +24 with 275/35
REAR: 19x11 +0 with 305/30

I am also putting on SPL front and rear camber arms but would not like to exceed 3 degrees of camber. Ride height is about 1.5" lower than stock. Will this fit?

Bumping this question

OptionZero

11-02-2018 05:30 PM

yes
folks run 19x9.5 +22 w/ 265 all day long, you're close enough

rears doable. Camber definitely required. Not sure if you'll need -3 though.
20x12 +20 rear is within 7mm and at around -2 camber i run 315/20

Rusty

11-02-2018 06:36 PM

Quote:

Originally Posted by OptionZero (Post 3796464)

I'm 285/35-19 on 19x9.5 +25, and 345/30-19 on 19x12 +28. Front camber -2.2, rear camber -1.8.

jchammond

11-02-2018 09:22 PM

Quote:

Originally Posted by CM370z (Post 3796461)

Bumping this question

I'd say yes & probably closer to -3* on rear & not quite as much up front.
"OZ"...What's your take?

OptionZero

11-03-2018 12:53 AM

The rears are way more aggressive than the fronts and I'm guessing it will be nearly 3 deg

Note also there is a range of flexibility depending on height and whether you have someone roll your fenders flat and pull them a bit even

AlWakRa

11-03-2018 10:31 AM

Quote:

Originally Posted by OptionZero (Post 3796464)

I ran 19x9.5+22 with 275/35/19 and -2.5 camber. It was fine, but needed to raise my front a little to not rub, left around, it was around 20mm between tire and fender. made it 30mm and this made the trick in street. I don't think it will be an issue with stock suspension.

Lvcky69

11-09-2018 08:32 PM

1 Attachment(s)

what wheels are these?

KamiSpeed

11-13-2018 12:09 PM

Quote:

Originally Posted by Lvcky69 (Post 3798032)

what wheels are these?

They look like the Vossen X Work VWS-1 wheels.

DarkJak

11-21-2018 02:17 PM

Currently running 275/40R18 Nexen SUR4G's on a 10.5x18 +22 square.
I am thinking about switching to the Yokohama A052 in 295/35R18 next year....
Now, I'm not too concerned about the rear, but will the fronts fit without rubbing?
Currently running about -2 degrees front camber and don't want to go more.

NorthStyle

11-21-2018 03:33 PM

Quote:

Originally Posted by DarkJak (Post 3800616)

Do you have pictures of how it currently sits? (I just want to see pictures because I'm inbetween running an 18x10.5 in a et12-15 with a 275/40 vs an 18x10.5 et30 with a 305/35)

All times are GMT -5. The time now is 03:23 AM.

Page 181 of 225

181

Show 40 post(s) from this thread on one page