Hoping for a bit of input. I just picked up a 370z Nismo, and ordered (deposit sent) some wheels. Still trying to nail down the offset....this is what the supplier
|
|
LinkBack | Thread Tools | Display Modes |
02-09-2018, 07:52 PM | #2491 (permalink) |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
Hoping for a bit of input. I just picked up a 370z Nismo, and ordered (deposit sent) some wheels. Still trying to nail down the offset....this is what the supplier is looking at:
F 19x9.5 +23 265/35 R 19x11 +18 305/30 Looking at lowering via RS-R coilovers, at about a 1" drop. Wanting to keep camber at rear in the OEM range, but on the higher end (closer to square), as I will be putting a turbo kit on it right away. This of course is for traction purpose. So, in other words, looking for the "square" look. Thoughts? Thank you very much...not my area of expertise, so it is nice to get some input from those that know this much better than I do.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
02-09-2018, 08:52 PM | #2492 (permalink) | |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 58
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684394 |
Quote:
I’m no expert on coilovers or lowering or the amount of clearance on backside of Wheels requiring the coilovers. But I also ran the more upright camber on my Z,, roughly (-0.8 to -1.0) Front & Rear. My Wheels are tight on backside w/7” backspace Front & 8” backspacing on rears...very close (finger tip) at all pinch points. But the front spacing (hub face to outer wheel lip) is 4” on front & 5” on rear’s...your front spacing is just over that at 4.36” & 5.29”...not bad; as you will need more clearance on backside & your tires will be a more square/stretch look than the 285/35,345/30’s I have on 19x10’s,12’s....I’m sure you can dig through this thread or through the [official 370z] wheel fitment thread & find one close to what you’re looking for. You may want to set your suspension up & then measure up for wheel offsets. As my goal was to maximize backside & tuck as much underneath fender as possible/ while tuning Wheels more upright. You’re in the ballpark with what you are posting: it’s just how ocd you’re gonna be with it. Good Luck & here’s a small pic of mine. 19x10,12’s +38 offset w/285/35,345/30 Nitto Invo’s Sent from my iPhone using Tapatalk
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
|
02-10-2018, 12:41 AM | #2493 (permalink) |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
^^^^Thank you...yeah, I'v been reading and searching for two days straight. I think I'm at a point where I am just starting to confuse myself even more.
May be time to take a break from offset searching.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
02-10-2018, 01:24 AM | #2494 (permalink) | |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,225
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Your sizes will fit fine. refer to this post here:
Quote:
NOTE that a 11 inch wheel +18 is the same outward spacing as a 10.5 +12 so your wheels will sit the same from the outside. Get some SPL arms and you can fit anything, especially since you aren't aiming to go low. I have a 20x12 +20 wheel with a 315/25/20 tire and approx 2 deg camber. There is room to spare. The Z has essentially infinite clearance. You would be hard pressed to find something that won't fit if you are willing to do a few small things like a fender roll and suspension arms. (Big things to me are negative offsets, overfenders, and extreme stretch)
__________________
OptionZero Build Thread Last edited by OptionZero; 02-10-2018 at 01:29 AM. |
|
02-10-2018, 02:08 AM | #2495 (permalink) | |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
Quote:
I have already ordered the SPL gear, so it sounds like I'm well on my way.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
|
02-11-2018, 06:11 PM | #2496 (permalink) |
A True Z Fanatic
Join Date: Mar 2012
Location: Temecula Ca
Posts: 1,225
Drives: 14 Nismo 370z #495
Rep Power: 750 |
The "Will it fit?" thread
Anyone running a 255/40/19x9.5 & 295/35/19x11?
Currently on 245/40 and 285/35, and looking for a tad more width, but not going for meaty. Critique away... Thanks
__________________
2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI | SPL F/R Camber Arms | HKS Hypermax IV | JDM Rear Fog Light |GT-R Push Start Button | Z1 2 Piece D/S | Illuminated Kicks | Tommykaira | Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 | Fast Intentions RHFC TDX CBE 12" CF | EcuTek |
02-11-2018, 07:26 PM | #2497 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,225
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Seems tall. 27 and 27.1 inches overall diameter. Slightly above stock diameters
__________________
OptionZero Build Thread |
02-11-2018, 07:27 PM | #2498 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,225
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Roll those fenders and you are good for anything. Go 325 in back, GTR level
__________________
OptionZero Build Thread |
02-11-2018, 07:33 PM | #2499 (permalink) |
The370Z.com Sponsor
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382 |
Thanks. No need to roll anything on the NISMO's, but I'll probably have to trim the plastic fender trim on the inside. May just remove the altogether.
__________________
750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg |
02-11-2018, 07:38 PM | #2500 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,180
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
I'm rolling on 285/35-19 PS4S and 345/30-19 PSS, on 19x9.5 +25 and 19x12 +28. You're going with a 1 inch drop. Then you would want 275/35-19 and 325-30-19.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
02-11-2018, 07:39 PM | #2501 (permalink) | |
A True Z Fanatic
Join Date: Mar 2012
Location: Temecula Ca
Posts: 1,225
Drives: 14 Nismo 370z #495
Rep Power: 750 |
Quote:
Yeah that’s what the math says but figured it would actually be about the same... Someone please correct my warped thinking if it is so. Check this out: I propose that 245/40/19x9 & 285/35/19x10.5 Would be the same dimensions (roughly within a couple MM height/circumference wize) as... 255/40/19x9.5 & 295/35/19x11 Comparison based on OEM Nismo Rays Vs 19x9.5 & 19x11. Am I crazy?
__________________
2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI | SPL F/R Camber Arms | HKS Hypermax IV | JDM Rear Fog Light |GT-R Push Start Button | Z1 2 Piece D/S | Illuminated Kicks | Tommykaira | Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 | Fast Intentions RHFC TDX CBE 12" CF | EcuTek |
|
02-12-2018, 04:42 PM | #2502 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Chattanooga, TN
Posts: 1,340
Drives: 13' MB 370z
Rep Power: 30949 |
11.5" wide wheel....what tire
Iv done my searching on google, with a couple results and searched here with 11.5" wheel as my phrasing, with no luck. Seeing if someone here might have a recommendation or a link. Im not looking for meaty, closer to a 315/25 tire but yeah, Im having trouble finding that. Maybe even a 325/25. |
02-12-2018, 04:46 PM | #2503 (permalink) | |
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 13,798
Drives: 2013 Nismo 370z
Rep Power: 2684392 |
Quote:
|
|
02-12-2018, 04:51 PM | #2504 (permalink) | |
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 13,798
Drives: 2013 Nismo 370z
Rep Power: 2684392 |
Quote:
the inner fender liners do rub a little. I have some small trimming to do. SSR Wheels Thread |
|
02-12-2018, 04:59 PM | #2505 (permalink) | |
A True Z Fanatic
Join Date: Jan 2009
Location: Chattanooga, TN
Posts: 1,340
Drives: 13' MB 370z
Rep Power: 30949 |
Quote:
I dont know man, Id prefer to drop the car right at tire level or slightly below. Ill also be running around -2.5 camber. My offset will be +15. At least those are the specs I hope will get me the look I desire. Last edited by Zerafian; 02-12-2018 at 05:02 PM. |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official The370Z "Hot Girls with Hot cars" thread *NSFW* 01.01.09 | AK370Z | Gentleman's Club | 187 | 01-12-2011 01:24 AM |
why did the thread "Sharing a bad experience with my 370Z" get closed? | TheSnakeJake | Nissan 370Z General Discussions | 1 | 03-27-2010 12:35 AM |
Why there isn't a "Monterey Blue"370Z thread? | Devil Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 9 | 08-24-2009 02:55 PM |
Official "Guess the Stig's Time" Thread | ResIpsa | Nissan 370Z General Discussions | 11 | 07-27-2009 10:45 PM |
Official "Nissan 370Z spotted in Japan" Thread | AK370Z | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 120 | 05-01-2009 10:30 AM |