Okay so i think i have decided but would like to know yalls opinions and what I should change.
Ferrada FR3 19x9.5 F +20 19x10.5 R +25 as for the tires I plan on either the Re-11s in 265/35 F 305/30 R or the S-04 in the same sizes.. I daily drive the car, occasionally do some "spirited" street driving lol and maybe in the future ill take it to a couple track days but not entirely sure. I do plan on lowering it at least an inch and was also wondering what camber I should be looking to run to make it sit either flush or a bit aggressive (a poke is fine by me). Thanks for any feedback :)

With the offsets that you have posted; the front's are way more aggressive vs the rears.
Go to [Official 370z]wheel fitment guide(pics/specs only) and check out all of the different setups.
As it is common to see 19x9.5+25 & 19x10.5+12 with that same tire size.
If you're gonna lower & track the car and desire a bit of poke,,, lessen the + a tad on each one...as there are lots of Z's pictured w/all alignment settings on that page.

This page; I don't think I placed brackets correctly.https://uploads.tapatalk-cdn.com/201...57aef9d007.jpg


Sent from my iPhone using Tapatalk

My point was that it's thinner. Which is less sidewall protection and lower load rating. Which is why i'm not interested. But it seems the tire industry agrees to this sentiment as there are very few 265/40 - 305/35 options on the market :mad:.

Enkei NT03+M 18x10.5
 

Wondering whether these will fit my '15 Sport (w/ Akebonos). I want to go to a square set up with 18s for a dedicated track set. I got a line on 4 Enkei NT03+M in 18x10.5; offset is +30; fitted with Dunlop Direzza ZII Star Spec - Size: 285/30R18. Any inputs on whether these will fit without rubbing?

Thanks!

I run a square set up of nt03 18x10.5 +30 with Toyo r888 295 30's and you will by fine with the 285 30's. You will need 20 mm spacers for the rear to make them flush. I run 15 mm spacers because Nismo off sets. To bad you don't live close I could make you a good deal on that wheel rim set up.

How do these tires and wheels fit?
 

Hey In2uitiv, did you implement this wheel and tire set up? If so, any complements/complaints?

For starter's...rear tire's are 1" taller than front's & would cause the "Christmas-Tree" effect.
Include your suspension info....including camber settings (example-stock,lowered on swift's,etc...)

Also, depending on what you're driving (base,sport,nismo) the outer wheel lip's will sit this much further out than oem wheels.
Base : F+47mm,R+30mm
Sport : F+38mm,R+32mm
Nismo: F+25mm,R+19mm

I'm buying some m368s 19x8.5 front and 19x9.5 rear 20+ all around, most likely going to run 245/35 front and 275/35 rear.. currently have 20mm front and 25mm spacers rear. My question is, can I still have the same spacers if I decide to go for this setup or do I have to go a little lower? Like 10mm front and 15mm rear? Thanks

depend's on your alignment specs. & how you prefer for it to look.

Do you think the tires will be sticking out a lot?

if your suspension & alignment is factory-they will poke with the spacer's...You may only need 10-15mm on rear's to even up with the front's.

Are you in a Sport w/9's & 10's with those 20/25mm spacer's?

If so,,,a 15mm spacer in rear only; will put your outer lip's dang close to where you are now.