The "Will it fit?" thread

[Unique_Z]

Hi Bullitt,

i intend to put 21 inch rims on the rear to make it meaner. can it work?

[bullitt5897]

Originally Posted by Iwan72

Hi Bullitt,

i intend to put 21 inch rims on the rear to make it meaner. can it work?

Yes 21's will fit perfectly fine. PM me and I can get you really good pricing on 20/21" combo

[Jquad]

Sup fellas just recently bought me some wheels
just wanted to know if this set of tires would fit.
which options do you think it's better?
this is my offset...
20x9.5 +15 F
20x11 +10 R

255-35 F
285-30 R

Any suggestions would be appreciated

[TypeOne]

Originally Posted by Jquad

Sup fellas just recently bought me some wheels
just wanted to know if this set of tires would fit.
which options do you think it's better?
this is my offset...
20x9.5 +15 F
20x11 +10 R

255-35 F
285-30 R

Any suggestions would be appreciated

It's going to fit nicely... just depends how low you want to go as well.

You might have a little big of a hard time tucking the tire with that 11' +10.

[Chris_1]

The fronts with a +20mm will work, but the +30 would be easier. THe rears are perfect with the +15.

[JJ-NISMO]

Thanks Chris!

Just so I know, why would the 30 be easier?

[bullitt5897]

Originally Posted by JJ-NISMO

Thanks Chris!

Just so I know, why would the 30 be easier?

+30 gives you a little more room for tires. Say for instance you went +20 it would be aggressive and on a stock cambered car you could only fit a 255 or smaller up front with out rubbing*. (*depending on your ride height) with a +30 you could easily fit a 265 tire

it really comes down to what you want and if you plan on running coilovers/springs or even plan on getting camber arms... Most people would say not to worry about those things and just get the safe fitment of +30. I look at it this way: If you are going to get coilovers and lower your car why not get the set that looks best. that way you dont have any regrets of not getting the most concave out of your volks...

The choice is yours if your staying close to stock I would recommend +30 but if your starting your mods and plan on working on the suspension then go +20

-mike

[JJ-NISMO]

Thanks Mike! Great response

[bullitt5897]

Originally Posted by JJ-NISMO

Thanks Mike! Great response

I PM'd you back. I hope that helps you on your decision

mike

[NewYorkJon34]

Bullitt or Chris, I need your advice on a set of advans I'm buying. Advan RS with the GTR face, the fronts are 19x9.0, offset +29 or +22? Rears: 19x10.0, offset +25 or +15?

[NISMOFO]

Originally Posted by NewYorkJon34

Bullitt or Chris, I need your advice on a set of advans I'm buying. Advan RS with the GTR face, the fronts are 19x9.0, offset +29 or +22? Rears: 19x10.0, offset +25 or +15?

I would definitely do the +22 front and +15 years. This setup you are looking at has the fronts 2mm farther "out" than mine in the front.....and 4mm farther "in" on the rear.

I'm actually looking to go wider or spacers.

I'm not sure if you car is lowered or is going to be lowered? I assume so?

You might end up wanting spacers someday with the setup you are looking at. But you'll definitely want the ones with the lower offset.

[NA&CH]

Jon 19x10 all four +15.

Dooetttt

Chris

[Svre46]

19x9.5
19x10.5
+0 offset

Lowering on Swifts..1.5 front 1.0 rear. Factory Camber.

Judging from what I have read this is to aggressive? What do you guys think and if it can be done what would be the right tire size. I am thinking it would need a stretch.

[NISMOFO]

Originally Posted by Svre46

19x9.5
19x10.5
+0 offset

Lowering on Swifts..1.5 front 1.0 rear. Factory Camber.

Judging from what I have read this is to aggressive? What do you guys think and if it can be done what would be the right tire size. I am thinking it would need a stretch.

I think the fronts would clear with no stretch. Even a stock 245/40 would work...stretched a little but its what comes on the nismo. I think a 265/35 would also clear fine. The rear is a bit aggressive and is about 2.5mm farther out than nismo wheels with 20mm spacers. But a stock nismo 285/35 might worth fine back there if you have maybe -2 camber or more. This is all just a guess based on what I have seen so far in pics.....no experience to back this up.

[Svre46]

Originally Posted by NISMOFO

I think the fronts would clear with no stretch. Even a stock 245/40 would work...stretched a little but its what comes on the nismo. I think a 265/35 would also clear fine. The rear is a bit aggressive and is about 2.5mm farther out than nismo wheels with 20mm spacers. But a stock nismo 285/35 might worth fine back there if you have maybe -2 camber or more. This is all just a guess based on what I have seen so far in pics.....no experience to back this up.

Thanks for the heads up. I looked at the nismos with 20mm spacer and they do look a bit funny but then again the car was not lowered. I found this thread in the link below and if I am doing this right the wheels I am asking about should be 13mm inward compared to the the ones in the link correct? If that is the case I would think that I would have no issues with a drop on the swifts since I would have 13mm to play with depending on the sidewall size I run. The rear as of right now would be lets say 285/35/19 and the front would be 245/40/19 ideally.

finally pics of mine....its pretty looow ;)