Are my wheel spacers damaged?

azn370z · 03-25-2010, 10:04 PM

*update*
I got my new set of spacers and this time it was still in the ichiba box so the spacers were triple boxed, last time it was boxed once. The spacers arrived not damaged. I installed the 20mm spacers and took it for a spin on the highway and no vibration at all.

I bought brand new spacers from a vendor. And all four spacers have dents on the side causing the face of the spacers to bulge out. For people that bought spacers did yours come like this, with dents and bulges? Mike, modshack??
Thanks

Trips · 03-25-2010, 10:12 PM

Mine had no dings on them! It looks like someone dropped them. I don't think it looks to severe to create a problem, install them and check for any vibrations.... If not comfy with them, return them for another set!

JB-370z · 03-25-2010, 10:28 PM

That is not good dude. The aluminim they used is too soft! OR they were not installed correct. What brand are these?

azn370z · 03-25-2010, 10:37 PM

I feel a little iffy putting on spacers already I don't really want to put spacers on that aren't completely flat. If there is vibration or there is vibration later on then I won't know if it's the bulging spacer or who knows. Later on if I sell my spacers It will be difficult to sell spacers with dents in them. But it's good to know someone bought spacers without damage.

These are ichiba spacers. Weird they placed 4 spacers on top of each other in 1 box rather than send me 2 spacers in its own boxes. If you look at the second pic you can see the nut holes are scratched up maybe from the way it was packaged.

Mike · 03-25-2010, 11:04 PM

they need to be completely flat. You can sand them smooth if you want, but I would return them and get H&Rs instead.

When I bought two sets of ichibas, each set came in its own box. I think they sent you used or returned ones.

JB-370z · 03-25-2010, 11:20 PM

I would not put them on bro, but thats just if they were mine. Sorry to hear about this.

LaSeeno · 03-26-2010, 12:21 PM

Return immediately.

azn370z · 03-26-2010, 12:34 PM

*update* spoke to the vendor and they told me to write refuse on the box and drop it off in a mailbox. They're sending me new spacers which I should have next week. A little bummed I couldn't install these yesterday, hopefully the new spacers come undamaged. Will update this thread next week.

Minicobra1 · 03-29-2010, 03:47 AM

Quote:

Originally Posted by azn370z

*update* spoke to the vendor and they told me to write refuse on the box and drop it off in a mailbox. They're sending me new spacers which I should have next week. A little bummed I couldn't install these yesterday, hopefully the new spacers come undamaged. Will update this thread next week.

That's good that u are sending them back, I wouldn't have kept them.

jmlenz · 03-29-2010, 02:39 PM

Those are damaged. My Ichiba spacers were perfectly flat with zero imperfections.

kenchan · 03-29-2010, 04:12 PM

yah, it *might* make your wheels to vibrate at speed and potentially prematurely wear your bearing. but it's alluminum alloy and doesnt weight much. i'd be more worried about how close the bores are cutout. that spacer looks like it's going to crack.

the only spacers with new studs i use are from Kic's. very well cut and the hardware is top notch. the centering ring is a perfect fit too.

azn370z · 03-31-2010, 11:53 PM

*update*
I got my new set of spacers and this time it was still in the ichiba box so the spacers were triple boxed, last time it was boxed once. The spacers arrived not damaged. I installed the 20mm spacers and took it for a spin on the highway and no vibration at all.

03-25-2010, 10:12 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Mine had no dings on them! It looks like someone dropped them. I don't think it looks to severe to create a problem, install them and check for any vibrations.... If not comfy with them, return them for another set! __________________

03-25-2010, 10:28 PM	#3 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	That is not good dude. The aluminim they used is too soft! OR they were not installed correct. What brand are these? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-25-2010, 10:37 PM	#4 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I feel a little iffy putting on spacers already I don't really want to put spacers on that aren't completely flat. If there is vibration or there is vibration later on then I won't know if it's the bulging spacer or who knows. Later on if I sell my spacers It will be difficult to sell spacers with dents in them. But it's good to know someone bought spacers without damage. These are ichiba spacers. Weird they placed 4 spacers on top of each other in 1 box rather than send me 2 spacers in its own boxes. If you look at the second pic you can see the nut holes are scratched up maybe from the way it was packaged. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

03-25-2010, 11:04 PM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	they need to be completely flat. You can sand them smooth if you want, but I would return them and get H&Rs instead. When I bought two sets of ichibas, each set came in its own box. I think they sent you used or returned ones. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

03-25-2010, 11:20 PM	#6 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	I would not put them on bro, but thats just if they were mine. Sorry to hear about this. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-26-2010, 12:21 PM	#7 (permalink)
LaSeeno Base Member Join Date: Feb 2009 Location: Mars Posts: 129 Drives: NA Rep Power: 16	Return immediately.

03-26-2010, 12:34 PM	#8 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	update spoke to the vendor and they told me to write refuse on the box and drop it off in a mailbox. They're sending me new spacers which I should have next week. A little bummed I couldn't install these yesterday, hopefully the new spacers come undamaged. Will update this thread next week. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

03-29-2010, 02:39 PM	#10 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	Those are damaged. My Ichiba spacers were perfectly flat with zero imperfections.

03-29-2010, 04:12 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, it might make your wheels to vibrate at speed and potentially prematurely wear your bearing. but it's alluminum alloy and doesnt weight much. i'd be more worried about how close the bores are cutout. that spacer looks like it's going to crack. the only spacers with new studs i use are from Kic's. very well cut and the hardware is top notch. the centering ring is a perfect fit too.

03-31-2010, 11:53 PM	#12 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	update I got my new set of spacers and this time it was still in the ichiba box so the spacers were triple boxed, last time it was boxed once. The spacers arrived not damaged. I installed the 20mm spacers and took it for a spin on the highway and no vibration at all. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*Ichiba Wheel Spacers in Stock!!*	Mike@Czp	Tires/Wheels	516	01-30-2018 03:17 AM
~~Kics Wheel Spacers in Stock!!~~	Mike@Czp	Tires/Wheels	451	11-22-2017 11:30 AM
CZP Wheel Spacers in Stock!! Check it out!!	Mike@Czp	Tires/Wheels	393	12-30-2016 12:58 PM
wheel spacers	black09Z	Wheels & Tires	9	05-19-2011 11:10 AM
GT Motoring - Lug Nuts and Wheel Spacers!!!	GT Motoring	Tires/Wheels	21	03-17-2010 10:46 AM