Help with VR-G2 fitment
 

Hey everyone, I am looking at getting a set of VR-G2s in black for my PG Nismo and need some help with the fitment. Any advice or help is much appreciated.

Any of the guys at Forged can probably answer your questions for fitment. You looking at 19" or 20"?

I am looking at a set of 20"s. I really have no idea what to do in regards to the offset and tires :/

If you want to run the 19" size which would probably work best you would need to run a 19x9.5 +22 front and a 19x10.5 +22 rear (I usually suggest a +12, but they are not made in this offset as of now). I would also suggest a 10-15mm spacer. The 20" size would be 20x10 +30 front and 20x11 +15 in the rear. I'll also warn you that going up 1" in size will also cost you about $1500 more. Feel free to PM or call me with any other questions :)

Thanks for the info Ryan!

Would it be possible to do a 20x9 and 20x10 or a 20x9.5 and 20.10.5 combo?

The G2 is not made in a 9.5/10.5 in the 20" size.

A 20x9/20x10 is definitely possible, but would not look as good as the 10/11" widths. The 10/11 fits perfectly with these offsets and would give you the best look. :) I believe the 9/10 widths would be too conservative and not look nearly as aggressive.

Thanks again Ryan!

I took a look at sideburnZ car... he is running Vr-G2s in 20x9 and 20x10 and they look reaaaalll nice.

I also need to consider what tires to put on :/

Edit...

20x9 and 20x11

You can safely fit a 10 up front with the appropriate offset. width and offset would be the same up front as the RE30s which we run on our shop 370z and Sharif's personal Nismo 370z. Let me know if you have any other questions :)