18s for track

As OZ said...19s or 20s for street!

Sent from my SM-N910P using Tapatalk

Aesthetically 19" look best on these cars. Also when going down to 18" TE37SLs you get a different look / face for the wheel. Both great choices, but 19" is the way to go man.

i see, thanks for the help, would 19s staggered be not as great for the track? if i were to get 18s i wouldve went for square

If you want to compare for the track none is better than 18". But for street and how the wheel "looks" on the car IMO and a lot of other peoples opinions 19" looks the best. These are wide bodied cars so when you put such a small wheel on it, kind of gives the car a "turtle shell" effect.

Track set up 18x11 +18 square with Nitto Nt01 315s

https://farm5.staticflickr.com/4379/...41df6395_b.jpg

https://farm5.staticflickr.com/4365/...a8be3940_b.jpg

Bro your Z looks soo focking great with that setup :drool:

Both of these answers I agree with .... BUT also depends on what wheels you elect to go with.

TE's are within 1lb on all corners from 18 to 19's. The limiting factor here is tire choices and what you're using the car for. We use our Nismo for TimeAttack with classing we sit in restrict tire sizing at 285, which to MAX that out, we would need 18's due to the limited sizing in 19's in most tires.

LOOKS WISE.... 19's for sure is the way to go. Performance wise, either work perfect, truly depends again on your tire needs

I ended up going with 19s that I got from KamiSpeed

275 PS4S Square setup

19x9.5 front and 19x10.5 rear volks te37 ultras in diamond black.

The Diamond Black looks great man! Great choice.

Thank you for seliing them to me! We made the sell about a year ago i would say. Finally had the chance to put them on and get the car on some coilovers. Great seller, would buy from again!

Lets get this thread moving! Some Rays Volk Racing TE37 Ultra 19" fitment. We ordered them in Rays Special Gloss Black Color.

19x9.5 +22 Front / 19x10.5 +12 Rear

https://farm1.staticflickr.com/811/4...d84502f6_c.jpg
https://farm1.staticflickr.com/798/4...3dba9d5d_c.jpg
https://farm1.staticflickr.com/794/4...f5bd34a0_c.jpg
https://farm1.staticflickr.com/787/3...b892b825_c.jpg

For those who have TE37 SL (19's). what specific accessories did you need for the center caps adapters?

Would these be it?

1. Volk Racing Center Cap Ring for TE37SL - 2.5mm / 3.0mm O-Ring
2. Rays A-Flat Center Cap - O-Ring Type

I'm trying to get a list of what I would need for my Te37 SL 19's PG.

Picture for attention :)
https://i.imgur.com/rIgCddfl.jpg

Neek,

call Tom at Speed Image USA

https://www.yelp.com/biz/speed-image...peed+image+usa

They move more TE37's of all variety than anyone in norcal. Most of CA.

I'm sure he can help you figure it out and get you the parts too. He's also in your neck of the woods.