Don't be scared, just take your time. Just pick one of the spokes and wipe it down first with alcohol. Just make sure you put it on the same spoke on all four wheels. Look forward to seeing them on the car. :tup:

http://www.the370z.com/attachment.ph...3&d=1462481267

^agree with alcohol! and it should be easier to put the decals on before the wheels are mounted on the car. And most of us put the decals here. But you're free to choose any spoke of your liking :)

From all the threads i've read, this is a flush setup, i will have pics tomorrow morning👍😀

Thanks!!pics friday

I will try to put on stickers tonight after work, i will put on the spoke u suggested i think its the best spoke👍😀

Can i use the wet method (soap&water) to apply volk stickers or no

http://i72.photobucket.com/albums/i1...psz9yahosg.jpg
Me and stickers is a no go. Bubbles everywhere had to remove it. Dont have steady hands

Have you tried spraying soapy water when applying stickers? You can move them around until you're satisfied.

Just ordered extra stickers next day shipping, will try the soapy water next😞

The clear spray that comes with cell phone protective films also work great :tup:

Thanks, i think i have the spray, never used it👍😀

Did you use a credit card or squeegee while you were applying them? A hair dryer is helpful also. If you end up using soapy water or the cell phone film stuff pls post an update. I was considering this myself but wasn't sure if it would work with sticker. I know tint application requires it but I'm assuming it's a different adhesive with tint vs sticker.

http://uploads.tapatalk-cdn.com/2016...da56c28e95.jpg


Sent from my iPhone using Tapatalk

Man I wish i would have jumped on those wheels when they were for sale! Great shot!

just did my stickers on my TE37SL few weeks ago, first one was 95% perfect after that I decided to do the last 3 doing the soap and water, man wished I'd done it on first wheel. It definitely works, it allows you freely move sticker to make sure placement is right. Make sure to have something to squeeze excess water/bubbles. Sorry posting a little late

As far as where to place sticker, I noticed most Rays display pics always place it on the second spoke going counter clockwise from the center of air valve. its where I place mine. Hope all this helps