Do a 275/35/19 - 305/30/19

Optionzero recommended 265 in the front instead. What would be the benefit of going 275 over 265?

Do a 265/35 fronts 305/30 rear combo Bridgestone S04🙂

Official VOLK 370Z Thread: POST UM UP!
 

Any pics if this tire setup?


Sent from my iPhone using Tapatalk

Picked up some TE37SLs on craigslist, powder coated black
19x9.5 +22 Front
19x10.5 +22 Rear -20mm Spacer, effective offset +2

285/35 Front
325/30 Rear
on the all new Michelin Pilot Sport 4s

Lowered on Swift Springs

With the spacer it has super aggressive poke but would rub on the outside of the fender quite horrifically so I had to take off the spacer and it is actually quiet flush considering it is +22, thought it would be much worse. Dont have pictures without the Spacers but will add if requested.

No rubbing without the spacers. ONLY if i have a passenger, get some slight rub occasionally on the front right for some reason, havent inspected the cause. (No fat chicks) :rofl2:

http://www.the370z.com/members/jsavv...-17-06-25.jpeg

http://www.the370z.com/members/jsavv...1-17-06-25.jpg

http://www.the370z.com/members/jsavv...1-17-06-25.jpg

nice! Can I ask for your wheel and tire specs?

from his FS thread
TE37SL
19x9.5 +22
19x10.5 +12

Tires not sure, but i'm guessing 265/35/19 and 305/30/19

Sick!!!! Here's mines almost identicalhttps://uploads.tapatalk-cdn.com/201...0e6b3093b8.jpg

Sent from my SM-G955U using Tapatalk

I think they were 255 S04 pole positions up front

trying to get TE37Sls for my Black Z, do you guys think pressed graphite is better or black edition(or double pressed black)?

also debating between 18s and 19s, car will be tracked

I love the double pressed black on black Zs. But for my Red I'll be doing the Pressed graphite

Currently there are no 19" TE37SLs in stock. If you are guys are interested I have a group buy going on now for Hi-Meta Bronze TE37SLs 19x9.5 +22 / 19x10.5 +12 Spec. Its an option for ya and I think will look great on either color Z.

http://www.the370z.com/group-buys/12...group-buy.html

thoughts on 19s vs 18s?

18s for track

As OZ said...19s or 20s for street!

Sent from my SM-N910P using Tapatalk

Aesthetically 19" look best on these cars. Also when going down to 18" TE37SLs you get a different look / face for the wheel. Both great choices, but 19" is the way to go man.

i see, thanks for the help, would 19s staggered be not as great for the track? if i were to get 18s i wouldve went for square

If you want to compare for the track none is better than 18". But for street and how the wheel "looks" on the car IMO and a lot of other peoples opinions 19" looks the best. These are wide bodied cars so when you put such a small wheel on it, kind of gives the car a "turtle shell" effect.

Track set up 18x11 +18 square with Nitto Nt01 315s

https://farm5.staticflickr.com/4379/...41df6395_b.jpg

https://farm5.staticflickr.com/4365/...a8be3940_b.jpg

Bro your Z looks soo focking great with that setup :drool:

Both of these answers I agree with .... BUT also depends on what wheels you elect to go with.

TE's are within 1lb on all corners from 18 to 19's. The limiting factor here is tire choices and what you're using the car for. We use our Nismo for TimeAttack with classing we sit in restrict tire sizing at 285, which to MAX that out, we would need 18's due to the limited sizing in 19's in most tires.

LOOKS WISE.... 19's for sure is the way to go. Performance wise, either work perfect, truly depends again on your tire needs

I ended up going with 19s that I got from KamiSpeed

275 PS4S Square setup

19x9.5 front and 19x10.5 rear volks te37 ultras in diamond black.

The Diamond Black looks great man! Great choice.

Thank you for seliing them to me! We made the sell about a year ago i would say. Finally had the chance to put them on and get the car on some coilovers. Great seller, would buy from again!

Lets get this thread moving! Some Rays Volk Racing TE37 Ultra 19" fitment. We ordered them in Rays Special Gloss Black Color.

19x9.5 +22 Front / 19x10.5 +12 Rear

https://farm1.staticflickr.com/811/4...d84502f6_c.jpg
https://farm1.staticflickr.com/798/4...3dba9d5d_c.jpg
https://farm1.staticflickr.com/794/4...f5bd34a0_c.jpg
https://farm1.staticflickr.com/787/3...b892b825_c.jpg

For those who have TE37 SL (19's). what specific accessories did you need for the center caps adapters?

Would these be it?

1. Volk Racing Center Cap Ring for TE37SL - 2.5mm / 3.0mm O-Ring
2. Rays A-Flat Center Cap - O-Ring Type

I'm trying to get a list of what I would need for my Te37 SL 19's PG.

Picture for attention :)
https://i.imgur.com/rIgCddfl.jpg

Neek,

call Tom at Speed Image USA

https://www.yelp.com/biz/speed-image...peed+image+usa

They move more TE37's of all variety than anyone in norcal. Most of CA.

I'm sure he can help you figure it out and get you the parts too. He's also in your neck of the woods.

Awesome thanks for the reference!

Following up on my search for center caps and for those who are looking in the future

https://i.imgur.com/0WlNVpl.jpg

...lol $390 for a set to match the Te37SLs.

I am not surprised. The japanese companies are difficult to get spare parts for because:
1) They don't stock ANYTHING
2) They hate selling individual parts. They want to sell stuff in a complete set, the way THEY intended it to be bought.
3) Their definition of "special color" is . . anything but the one or two colors we need is "standard"

Your only other alternative is to pray and get lucky on Yahoo Japan, i guess

Also - i forgot, the SLs aren't "supposed" to have center caps, which is why the adapters were created. Same for the TE37 Ultra Track Editions

EDIT:
Crap! i just checked Evasive and the adapters alone are $60 EACH?!

https://www.evasivemotorsports.com/m...SABEgL_APD_BwE

Yup! The SL Center Cap Adapters are $256 MSRP alone and then you have to buy center caps. As you could probably assume, we dont sell those all the time. Its only if you just HAVE to have center caps on your SLs.

I mean, don't get me wrong - they do improve the look, i can't stand the center-cap-less look

thankfully, my Ultras came with center caps that matched and that model doesn't need an adapter

EDIT:
It does look odd with the different colored hub surface

I just want to find a way to either hide or eliminate the rust that builds up where the center cap should be on the wheel. I've seen some people spray paint that area so maybe i'll go down that route too. But center caps would have been nice :icon17:


https://www.m3post.com/forums/attach...1&d=1303186502

https://www.m3post.com/forums/attach...1&d=1303187118

https://www.m3post.com/forums/attach...1&d=1303187118

man up, sell them, get some 20 inch ultras like the cool kids
they come with the caps

i would have loved the ultra tourers if they came in 19's haha

Can anyone rocking 10.5 TE and 305 rear take some close up pictures of the wheel? Deciding between 305 or 295.