Muteki SR35 Close End Lug Nuts Lug Nut Key for Spline Drive Lug Nuts
 

Hello.


I am hoping someone who is running Muteki SR35 Close End Lug Nuts can look at their lug nut key and let me know what number is stamped on the top of it. Its either 12 or 16.



Misplaced mine, and need to get a new one.


Thank you in advance.

Hi, cooltoy.

I just checked mine and it's 16. Hold off on ordering a new one, though. I may have an extra I can ship to you. Can you give me until tomorrow afternoon to see if I can find it?

Thank you very much.


Very much appreciate it.


On a side question - are the nuts six or seven spline?

Well, I thought I had an extra one but I can't find it. I don't want to hold you up in the event you need one as soon as possible, but there are a few other places I can check tomorrow.

Also, I just saw your question about the number of splines and I'll check that tomorrow too.

No problem. Appreciate it either way. Thank you.

Sorry for the delay, cooltoy.

I found the extra lug nut key but it's different than the one that matches the locking lugs on my Z now. I had to buy a new set of SR35s and, although both sets have 7 splines, the pattern of the splines is different. One lug nut key is labeled with 13 and the other is labeled with 16. If you want to post a pic of the end of one of your locking lugs, I can try to match it up and tell you which key you need.

Unfortunately the lug nut is still attached to the wheel and is hidden inside the hole.


Which one of the two is for your current lug nuts?

I'm using the one labeled 13 currently.

Hmm. I am about to order 16, or so has been the consensus. Now I wonder.

Give it a shot and good luck. Let me know how it turns out.

Thanks for the help.

Well, it was not 16.


I'll try 13.

Number 11 worked.


Its a SR48 key, but it works. Go figure.

Very weird. Glad you got it figured out, though.

Thank you.