Major offset issue..for square setup.
 

Hey all..put a post up 6 months ago discussing this and placed an order. They arrived after a 6 month wait and here are the results. Can I get some help? Was trying to run square 18s and have a full spare, so all the same offset with spacers. Surely don’t need them! I can return them for a hell of a hit and a long *** wait. Shouldn’t a +25 tuck a tiny bit, not stick out a ton?!

That doesn't seem right. What does the sticker on the wheel say?

They said the wheel says +25 on all 4 but the car is hanging As well. They want verification I want my tires put on

Still seems excessive. While it's on the lift, put another floor jack on the bottom of the knuckle and raise up the hub to get a better idea of the fitment.

Width and offset are almost identical to a Nismo rear wheel. What's your suspension look like? Fronts should be fine with a bit of camber and fender tab trimming.

They sent me these pics and told me they will stick out and need a ton of camber..I gave them the go and here are my results. I do have a 20 mm spacer to toss in the rear if I want. They didn’t install it. It was a pretty unnecessary cause of panic lol glad my order was right I waited 6 months!

Yes that will poke without the camber. Depending on the tire they will start to tuck at around -3. It's a little aggressive but your tires should still wear evenly so long as the toe is minimal. Out back 20mm might be a bit much depending on camber and tire size.

Unlikely, but i wonder if Enkei might have ****** up and sent 18x10.5 +15 instead. That appears to be a size available on their website

Did you swap all four wheels into different positions to see if they fit identically? If there's any discrepancy, there's your problem


That does seem to poke out alot for 10.5 +15

Wow, im no expert but thats more than I expected with +25. My LMGT4s that are coming are +15, now im worried :icon14:

I think a spacer on the back would look good

the original poster never got back to us so we don't know what his issue was

I personally run 20x11 +15 in the front so . . . i can tell you it can be do

Your 9.5 or 10.5 +15 Nismos are also doable

with camber

Im running 20x10.5 offset of 25 front and rear but with a 15mm spacer in the rear. Pulled them off my Q60

Holy crap guys I didn’t realize I left this thread all hanging. The wheels fit great with no need for the panic. Order was correct. I tossed a 15mm spacer on the rear

Looks good dude, more so you're puttin the set to work.

Going to hit it extra hard next year…have a Wavetrac sitting right now with a z1 csc elimination kit..z1 diff kit…all in my garage and my gtm stage 2 sc arrives tomorrow!! Next year will wreck these tires.