Forgestart F14 Specs & Confirmation

kromberg · 03-10-2021, 03:56 PM

I am ready to buy a set of F14s for my 2013 Nismo and I just want to double check a couple of things before I place the order. Here is what I am thinking.

Stock suspension, stock wheel alignment.

Plan on dropping it about 1" with the Eibach Pro Kit Lowering Springs.

19x9.5 +25 offset Deep Concave
19x11 +15 offset Super Deep Concave

265/35/19 - Fronts
305/30/19 - Rears

After more research, the caliper clearance issue is a matter of spoke design and not offset. Looks the the Forgestar's should not be an issue. Overall now, does this look like a reasonable setup that will work?

NorthStyle · 03-10-2021, 05:50 PM

Do you plan on lowering your car? If so, the front width/offset are weak. I ran a 19x10 +20 with a 275/35 with unmodified fenders but have spacers now since I rolled my fenders. The rears will be fine.

cooltoy · 03-10-2021, 06:39 PM

Our biggest question is your suspension set up. That plays a major part in wheel choice and since there is no information on your set up, it is difficult to provide advice.

OptionZero · 03-10-2021, 10:10 PM

By god don’t buy anything in those specs

Read this thread:
Wheel Fitment 101: START HERE

Then come back

jchammond · 03-11-2021, 05:15 AM

A 2” wheel stagger will have nearly the same offset

Wheel alignment plays a big role into this; as for me (performing Straight Line Acceleration only) and setting my camber at 0* ..... I would order closer to a +32 front/ rear in the 9/11” combo

But unsure what you’re after, a sunk-poke setup

jchammond · 03-11-2021, 05:20 AM

Quote:

Originally Posted by OptionZero

By god don’t buy anything in those specs

Read this thread:
Wheel Fitment 101: START HERE

Then come back

jchammond · 03-11-2021, 05:22 AM

Quote:

Originally Posted by kromberg

I am ready to buy a set of F14s for my 2013 Nismo and I just want to double check a couple of things before I place the order. Here is what I am thinking.

19x9 +35 offset Deep Concave
19x11 +15 offset Super Deep Concave

My biggest question are the fronts going to be able to clear the large Nismo calipers?

List your tire sizes, as this will help too.

kromberg · 03-11-2021, 05:55 AM

Quote:

Originally Posted by OptionZero

By god don’t buy anything in those specs

Read this thread:
Wheel Fitment 101: START HERE

Then come back

I did before posting. From my understanding of it, that is what I came up with. Other than promoting your 101 post, you have not added anything of value.

GetYourWheels · 03-25-2021, 07:12 PM

Quote:

Originally Posted by kromberg

I am ready to buy a set of F14s for my 2013 Nismo and I just want to double check a couple of things before I place the order. Here is what I am thinking.

Stock suspension, stock wheel alignment, and not planning on lowering it.

19x9 +35 offset Deep Concave
19x11 +15 offset Super Deep Concave

245/40/19 - Fronts
295/35/19 - Rears

My biggest question are the fronts going to be able to clear the large Nismo calipers?

Hey hit me up if you need Forgestars. We are their number 1 dealer in the USA.

Also, the front fitment can be better. 19x9.5+25/30 Deep concave works.

kromberg · 03-31-2021, 08:30 AM

First post updated with new info....

NorthStyle · 03-31-2021, 11:16 AM

In response to your last comment, I believe the caliper clearance will depend on a combination of the width and spoke design. There are a few 370Zs running SDCs in front but I've only seen them on a 19x10 with ~+20 offset or lower.

kromberg · 03-31-2021, 12:14 PM

Quote:

Originally Posted by NorthStyle

In response to your last comment, I believe the caliper clearance will depend on a combination of the width and spoke design. There are a few 370Zs running SDCs in front but I've only seen them on a 19x10 with ~+20 offset or lower.

Thanks for the info, so deeps should work fine then.

NorthStyle · 03-31-2021, 01:40 PM

Deeps will be fine. Most here run the Deep concave 19x9.5 20-25 offset for the front. Personally, I have a Deep concave 19x10 +20 in front.

cooltoy · 03-31-2021, 02:36 PM

Trust in GetYourWheels.

GetYourWheels · 03-31-2021, 02:47 PM

Quote:

Originally Posted by cooltoy

Trust in GetYourWheels.

03-10-2021, 03:56 PM	#1 (permalink)
kromberg Base Member Join Date: Apr 2012 Location: Colorado Posts: 93 Drives: 2013 Nismo Rep Power: 13	Forgestart F14 Specs & Confirmation I am ready to buy a set of F14s for my 2013 Nismo and I just want to double check a couple of things before I place the order. Here is what I am thinking. Stock suspension, stock wheel alignment. Plan on dropping it about 1" with the Eibach Pro Kit Lowering Springs. 19x9.5 +25 offset Deep Concave 19x11 +15 offset Super Deep Concave 265/35/19 - Fronts 305/30/19 - Rears After more research, the caliper clearance issue is a matter of spoke design and not offset. Looks the the Forgestar's should not be an issue. Overall now, does this look like a reasonable setup that will work? Last edited by kromberg; 03-31-2021 at 08:29 AM.

03-10-2021, 06:39 PM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Our biggest question is your suspension set up. That plays a major part in wheel choice and since there is no information on your set up, it is difficult to provide advice. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 03-10-2021 at 06:41 PM.

03-10-2021, 10:10 PM	#4 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	By god don’t buy anything in those specs Read this thread: Wheel Fitment 101: START HERE Then come back jchammond and 15 370Z like this. __________________ OptionZero Build Thread

03-11-2021, 05:15 AM	#5 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	A 2” wheel stagger will have nearly the same offset Wheel alignment plays a big role into this; as for me (performing Straight Line Acceleration only) and setting my camber at 0* ..... I would order closer to a +32 front/ rear in the 9/11” combo But unsure what you’re after, a sunk-poke setup __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

03-31-2021, 02:36 PM	#14 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Trust in GetYourWheels. God-Speed, sx moneypit and 15 370Z like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

03-10-2021, 05:50 PM	#2 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,259 Drives: 2011 370Z Nismo Rep Power: 24277	Do you plan on lowering your car? If so, the front width/offset are weak. I ran a 19x10 +20 with a 275/35 with unmodified fenders but have spacers now since I rolled my fenders. The rears will be fine.

03-31-2021, 08:30 AM	#10 (permalink)
kromberg Base Member Join Date: Apr 2012 Location: Colorado Posts: 93 Drives: 2013 Nismo Rep Power: 13	First post updated with new info....

03-31-2021, 11:16 AM	#11 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,259 Drives: 2011 370Z Nismo Rep Power: 24277	In response to your last comment, I believe the caliper clearance will depend on a combination of the width and spoke design. There are a few 370Zs running SDCs in front but I've only seen them on a 19x10 with ~+20 offset or lower.

03-31-2021, 01:40 PM	#13 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,259 Drives: 2011 370Z Nismo Rep Power: 24277	Deeps will be fine. Most here run the Deep concave 19x9.5 20-25 offset for the front. Personally, I have a Deep concave 19x10 +20 in front.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Color code confirmation	geokots	DIY Section (Do-It-Yourself)	4	08-12-2020 10:53 AM
Fitment Confirmation please	PAYCO	Wheels & Tires	7	05-17-2017 11:12 AM
spacers - Confirmation	ParkStr8	Wheels & Tires	1	01-28-2017 11:04 AM
2015 Spoiler Confirmation	highrise955	Exterior & Interior	4	05-30-2015 12:12 AM
Confirmation or communication after ordering?	ryang	Nissan 370Z Pricing / Ordering Discussions	1	12-02-2011 03:13 PM