Touring Wheel Center Caps

Spartan 1771

I'm working towards pretty much debadging the entire outside of my Z (with the exception of the Z turn signals). I would like to replace the "Nissan" center caps on my touring wheels with blank caps. Has anyone see these for sale anywhere?

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

BlackCherryZ

the z store has a couple of center caps..........but i am not sure if they will fit 370z

Spartan 1771

I didn't see any for the 370, but I'll look through their site. Thanks!

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

armensti

i didnt replace them i just painted them and they look good.

__________________
Shutting down competition one car at a time

TipsZ

I've pretty much wondered the same thing. I've debadged the car (with the exception of the Rear Nissan emblem - until I can find a suitable / cheaper replacement)

With regards to the center caps. I contacted several Rays vendors and here is one of the responses I received:

"The wheels that come with the 370Z will be special order from Rays by Nissan and won't match the wheels sold separately by Rays as far as center caps go. You may get lucky, but Rays doesn't list compatibility with OEM Nissan wheels. The only thing we could suggest would be to measure the existing center cap and compare to the Rays center caps as per their website: RAYS CO., LTD. "

I just have not measured the inner and outer cap circumferences to compare against the Rays website Flat Type center cap yet. I plan to do that this Saturday, however if you get a chance to do it before me, let me know and we can compare measurements.

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

Spartan 1771

I won't have a chance to play around with the Z this weekend. It's supposed to snow and I'm moving. So if you happen to get around to it, let me know the measurements.

Thanks!

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

TipsZ

Well, from what I can tell the center caps for the sports wheels are 2 1/8 inch for the outer ring and 1 7/8 inch for the inner ring. Yet on the rays website they use some odd symbol measurement and can not find a conversion for it. Grrrr....

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

Spartan 1771

Nothing can ever be easy.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

TipsZ

Any luck with finding replacement center caps for the 19" Rays?

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

Spartan 1771

I haven't looked. I've been to busy with work, not to mention the fact that my Z is literally buried under several feet of snow (see my pics). When I get around to it, I’ll let you know. Do the same if you find something.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

TipsZ

Will do. Mine is currently up on stands. Too bad you are up in the North East dealing with that snow! I hope it clears up sometime soon so you can get to driving her (always assume it is a her) again.

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

Spartan 1771

Yes, it's a her. We're in the middle of another snow storm right now, so who knows when i'll get to drive her again.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

VaGntlmn

Anybody ever find any good touring center caps?
I'd love to get rid of the Nissans.....

__________________
Bill
2010 370z; Tour/Sport; 6mt; BlackCherry/Grey; 318 rwhp; 265 lbs rwtq.
To view a list of my mods, click here; To view a photo journal of the mods, click here.

Danny89141

I'm looking for the same center cap solution. I took a look around, but haven't come up with anything yet.

Danny in Las Vegas

Spartan 1771

I'm still interested as well, but haven't found anything yet. If anyone comes up with a solution, please post it here.

__________________
~Rob

-DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...