18 inch wheels for 2017 Nismo Inquiry
 

Reached out to fitment industries regarding downsizing to 18 inch wheels but they stated they do not recommend downsizing wheels as it may result in issues with caliper clearance.

I've seen others on the forums pull of 18" and checked out the 18" wheel thread but didn't see much for 2015+ Nismo.

What would you guys recommend for a 2017 stock suspension that look similar to Gram Lights 57CR?

What offset would be recommended for an 18" staggered setup on the Nismo with fully stock suspension.

18x9.5 for the front
18x10.5 for the rear

But not sure what offset is needed without any spacers to get a look similar to the stock wheels fitting with the fenders and clearing the calipers. I know stock offset is 40 front and 23 rear. Green as grass when it comes to after market wheels and trying to figure this out.

Would something like
18x9.5/18x10.5 5x114.3 18/22 work or not?

Also what about bolt pattern measurements?

Thank you in advance.

You realize that the 2015+ Nismo Z has the same sport calipers as . . . every other Z with sport calipers, right? The only difference is the color. Which does not affect clearance

Offset is not that primary issue. SPOKE DESIGN determines brake clearance. The two wheels with the same width and offset may have different clearance because of how the wheel is shaped. This has been discussed repeatedly

Additionally, every Z has the standard Nissan bolt pattern: 5 x 114.3

Why would you want to replicate the stock wheel fitment which is utterly hot garbage?

Since you are in Florida, I would highly recommend contacting KamiSpeed, a Florida vendor here who is a Rays Wheels distributor. https://www.kamispeed.com/

The Gram Lights range is probably worth looking at - it's the the entry level range from Rays Engineering, roughly $400/wheel depending on whats in stock, what sort of color you want.

In particular,
Gram Lights 57CR, a fairly straightforward 5 spoke design:
https://www.rayswheels.co.jp/product...=en&wheel=57CR

or

Gram Lights 57DR, a simply 6 spoke design:
https://www.rayswheels.co.jp/product...=en&wheel=57DR

Both are readily stocked stateside by Rays distributor in the US (Mackin Industries)

Take note of the EXTENSIVE legend chart that shows what brakes each size will clear. Thats how you know Rays is legit - they are testing and putting that info out there. Shittier companies will not because they're . . . not Rays.

Front: 18x9.5 +22
Rear: 18x10.5 +12

This will clear everything. Brakes, fenders, etc. You can use 245/45 front and 285/40 rear and match OEM tire diameter


Word of warning - think about why you want to go down to an 18. It's gonna look like crap. the Z's wheel wells are enormous - thats why you should be going the opposite direction and looking for 19 or preferably 20's

18 inch wheels are used by track folks for cheaper and wider tire selection


Enkei and Work have 18 inch wheels but brake clearance is going to be a more indepth discussion as their spoke designs do not clear the brakes in all sizes.

You should also read this thread:

http://www.the370z.com/wheels-tires/...s-370z-45.html

which obviously you could have found if you looked for it

Perhaps I am a bit strange but I prefer my 18" Base wheels to the Nismo/GT alloys.

Maybe spacers would improve the arch gap but I like the wheeels.

http://www.the370z.com/members/storm...img-0852-1.jpg

Who took a dump in your mouth to make you end up being all sissy pissy?

Everyone is always in a bitchy a55 mood around here making it seem like they are obligated to reply but it is an inconvenience to them in doing so.

You can just reply in a normal civilized manner or not at all. I just don't get these forums these days. Seems like we are on Facebook.

Uh, if you are going to criticize OZ, then at the same time you should give credit on the very informative post earlier.

While on stock suspension it won't look ideal, it doesn't look bad on a lowered Z with some meaty tires.....

https://www.fitmentindustries.com/wh...ring-57dr-tein

I spoonfed you all the information you needed and more and all you can do is bitch about hurt feelings because someone hit you with the truth on the internet

Who is really uncivilized here?

Take the info and thank me for educating you instead of whining, i did your damn work for you and maybe take the hint as to how to find answers in the future

Fuckin showed you how to get wheels AND use the forum you ingrate

I'm guessing your mom.

Because every question asked these days has already been answered at least a dozen times. Try searching next time :rolleyes:

Pull your head out of your âss. It's people like you that make it seem like we are on FB here :shakes head:

There's a reason there is an iggy list... and the OP's on mine.

OP: Forum search is your friend, just like Google is. OZ gave you everything you need to know, yet YOU are the pissy one. FOADPF.....:icon23::icon23:

Take chill pill, xanax, zoloft or even better a klonopin! Now that you know that all Z with sport brakes are the same go back to 18's on Z thread!

Oh and don't consult with Fitment Industry for anything. They advise is worth the time to read it!!!

Sent from my SM-G965U using Tapatalk

Agreed! I just used the link as it had 275/40 tires (somewhat meaty) as a reference to support my earlier reply.

I'm glad I got a thick skin. ;)

I went through that whole thread at least three times before buying two sets of wheels for my track setup! There are few people on here that you can take their advice as gospel for wheel fitment, OZ and JChammond for starters!

Sent from my SM-G965U using Tapatalk

Yep, like an armadillo, LMAO!

Sent from my SM-G965U using Tapatalk

I don't know how many times I've read through that thread (18's) and the meaty tire thread. They have been my resources for not only "the look" I was going for, but also the best return on investment with regards to money spent and performance obtained. I've been lurking around here, reading a ton, for about the last 7 or 8 months trying to steer myself clear of things to avoid, what to look for and what to take into consideration.

OP just take a second, read a little and use that search function. You will find just about any and all information that is available for this platform if you put in the work.

JChammond? You mean the guy that's building that huge chicken coop next to his house in SC??? :ugh2:

Teflon. Nothing sticks. :tup:

I thought it was a BBQ shack. :icon14:

OZ didn't have to type that literature for you. He could have just left it at "search for it", but did your work for you.

Also, pot calling the kettle black are we? You want to talk about "normal" and "civilized" mannerisms? Look at your previous response posts to other members in other threads. One member asked about TT for his Z, and you tell him to go buy a GT-R (btw, wtf?). I also believe you even came at me that I didn't know how to use ebay properly, all because I stated I was weary of ordering car parts from ebay (again, wtf?).

Before you go attacking other members, check yourself. And most importantly, before you go asking a question, be sure to search for it.

And stop making Floridians look bad.

You guys from Florida look bad anyway. Too much sun. :shakes head:

Don't be judging him because he's country!!!

Sent from my SM-G965U using Tapatalk

Believe me, I'm trying to move outta FL. 85+ degree weather during Christmas isn't working for me :shakes head:

Anyone whose tag contains "Boyz" is an auto-ignore.

Let me guess, OP or his mom are originally from NJ?

Not even bothering to ask where the dad is from cause I'm damn sure he doesn't know.

Sent from my SM-G955U using Tapatalk

Hey now. You don't have to be country to raise chickens. Had a family raise them in the neighborhood when I was growing up. :icon14: Nothing like walking down the street and being chased by chickens. :shakes head: I hated the ducks. They are some mean suckers. :shakes head:

Let's not be too harsh on the OP. Penile dwarfism would give anyone a short fuse.

Sent from my SM-G955U using Tapatalk

After a while. Your skin looks like leather. Best suited for a hand bag or a pair of penny loafers.

When is the last time you looked at your junk? You fit that description. :rofl2:

LMAO, we had chickens, ducks and a goose. The goose ruled the yard until he tried to mate the dog and then we had no goose!

Sent from my SM-G965U using Tapatalk

"being chased by chickens"? they chase? and what's wrong ducks? all I ever see are mallard ducks and they are the sweetest creatures....

Hey man, don't mistake my jealousy for judgement. Also, I'm fairly certain JC's chickens will be "Free Range" certified given the size of that coop. So... :icon17:

You must be the exception :rofl2:;)

Get some of those big white farm ducks. You'll see. :eek:

the Aflac duck? I find him quite amusing: "AFFFFFLACCCCCC!"

I've never had a problem with the 85 degree Christmas / New Year's season... it's the other 11 and a half months of 93 degree, 100% humidity, 50/50 percent thunderstorms that gets a touch old. LHM!!!!! :shakes head:


Hey EW, are you listening?????? :icon14:

93?? Where in FL? Lmao it’s usually 100+ in Tampa. The sad part about the picture is that is right on the Gulf of Mexico (skyway bridge) and with the sea breeze.

This doesn't even scratch the surface of "making Florida look bad".

And the OP can't even spell Florida.

Already brought to his attention in another thread lol:

:rofl2: joke's on you come ZDayZ...

Thanks for the idea :tiphat:

Time to tag every thread he's created with some creative tags :tup: