Center Caps

TipsZ

Does anyone know where I can obtain some center caps that will fit the 19" Rays that are stock on the Sports Package?

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

vipor

found this:

ORNAMENT-DISC WHEEL - 370Z (Z34) 2009+ :: Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com

don't know if it's the same as the sport cap though. i believe this one is for the base wheels.

__________________

2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq
Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers

TipsZ

Thanks Vipor, but I want to get rid of the Nissan emblem from the center caps.

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

vipor

ook, gonna sand em down or whatever I assume?

__________________

2009 NISMO # 0193 | QAB | Albums! | 05.04.10 (Dynojet) 291.94hp/248.28tq
Oil Cooler (DIY) | Custom Headlights | GTSPEC Braces | F.I. Long Tube Headers

TipsZ

I was hoping to find some aftermarket or some other Rays 'blank' center caps to avoid having to sand them / mod those. I would rather have a blank slate to work with to possibly powder-coat or add a Z to them.

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

ctzn

When I got my wheels powder coated they had left over paint from the job which I am going to use on the centercaps. If you get black caps then powder coat the wheels a dark gray or black there may be difference in value or hue causing thing cap to stick out oddly. So if you are going to get them powder coated I would just ask for the extra paint to deal with the caps.

TipsZ

So no one can recommend an aftermarket / replacement Center Caps for our 19" Volks? I would like to get rid of the Nissan Center Caps and possibly put on some Volk Center Caps, but am unsure if the plain flat ones will fit. Anyone have experience with this?

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

TipsZ

Problem is that they are plastic so they can't be powder coated. I really hope that painting them will not look too awful. In addition, I am having a tough time finding black lugz that will fit the 19" stock Rays.

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal

Mike

right, there is no liquid paint left over after powdercoating, as none is used. Tip, I think if you go to a good body shop, they should be able to get you something real close. My shop did mine and matched the gloss level exact.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

TipsZ

Thanks Mike. Looks like that is what I will have to do. I might as well grind down that Nissan emblem first .. man these center caps are just UGLY.... grrr

__________________
Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics
TipsZ journal