Just spent a good amount of time talking with a rep named Jason on GetYourWheels.com and he was extremely helpful. We spent a long time talking about the Savinis, and
|
|
LinkBack | Thread Tools | Display Modes |
08-19-2019, 08:45 PM | #16 (permalink) |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
Just spent a good amount of time talking with a rep named Jason on GetYourWheels.com and he was extremely helpful. We spent a long time talking about the Savinis, and he leaned toward the SF-V4 as they are flow forged and their lighter and stronger option. I still wasn't sold on them aesthetically, so I asked his opinion of some other options and he pointed me to the Forgestar CF5-V. These have multiple color options (including a silver option unlike the SV-F4) and in addition are cheaper. They're also flow forged, as well.
I'm also a bit more comforted by the Forgestar reputation, at least as far as I know, they are very well thought-of in the wheel community. So I think I'm leaning this way, as of now. Just have to decide about 19s or 20s, probably going to do 9.5"/11" F/R. Unless anyone can convince me doing a 10"/12" split in 19s would be best? I like the Super Deep Concave, which is only available in 19s... Argh! |
08-19-2019, 09:19 PM | #17 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Most people run a one inch stagger f/r
It comes down to the offset and what tire size you want. Many factors go into wheel sizing which is why I recommended looking through the wheel fitment threads do you can decide for yourself
__________________
OptionZero Build Thread |
08-19-2019, 09:22 PM | #18 (permalink) | |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
Quote:
And what is the benefit of a 1" stagger vs a 1.5"? |
|
08-19-2019, 09:39 PM | #19 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
Tire sizing
It sounds like you aren't doing anything interesting with the car or modifying it to a high level So Just get 19x9.5 around +25 and 19x11 +15 and be done with it. It'll look fine, fit easy, and you don't need to use your brain because it's been done before and works Forgestar's super deep concave doesn't clear akebonos except at super aggressive sizes, if at all. Not happening at your level Run 265/35 front and 305/30 rear Simple and works Which u also could have found from reading those threads, but whatever
__________________
OptionZero Build Thread |
08-20-2019, 07:29 AM | #20 (permalink) | |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
Quote:
Thanks for the information, though. I'm trying, I really am. I just have a demanding job and a family and only have a couple of hours here and there to read and research. |
|
08-20-2019, 09:28 AM | #21 (permalink) |
Track Member
Join Date: Apr 2013
Location: Colorado
Posts: 642
Drives: Poor man's Porsche
Rep Power: 542 |
This is good general guide that helped me when I first started researching offsets for the z
It outlines the range of offsets and width that fit at stock height and camber. It is just a general guide as height and camber will also influence fitment. Generally speaking you can go more aggressive if you are lowered and or have more negative camber. Option Zero made a great suggestion. If you don't have that much time to invest in researching what fits, just go with his suggestion. Whatever wheel you buy make sure that you find out if the wheels will clear the brake calipers. Last edited by Brendan; 08-20-2019 at 09:31 AM. |
08-20-2019, 12:26 PM | #22 (permalink) |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
Thanks @Brendan for that chart, it's very informative to see things in a graphic format to at least give me some idea of the relationships.
My question is this: what do those numbers in the chart represent? Is that a measurement of distance from some point or what? I get the offest and width (the X- and Y-axis), but while I see the relationship to the numbers in the chart, I just don't know what those numbers represent. - EDIT - OK, I think I get the "poke past hub" thing now. Never mind... this would be a measurement from the hub to the edge of the wheel, so you can approximate it to the fender? Some of it confuses me slightly, as for instance, the recommendation from OZ was a 19 9.5 +25 and 19 11 +15 and Jason with GetYourWheels was for a 9.5 +20 and an 11 +15 (I believe). Both of these recommendations are in the "red" zone on the above chart, so I'm trying to figure out how that relates. I have time, I'm not under the gun in having to buy wheels, and I would like to understand the relationships between all the variables as well as I reasonably can. In addition, I don't know what wheel diameter those charts represent, as I assume (I know, I know) that wheel diameter would affect these things, too. I have been wanting to go with 20" wheels, although I am open to 19", too. I just am not sure how much that affects things and in which way - in the "Will it fit?" thread, the vast majority I've seen are 19s, very few 20s seem to be run on the Z. Not zero, but a very small number it seems - again, I am still looking, reading and researching, just asking questions as I go, too. Also, most of the 20s I have seen so far seem to be on cars that are very lowered or bagged, lots of camber, etc., i.e., a particular "style" of Z, if you will, which is not one I am pursuing. I think 20s would look great, but I don't want the super slammed and "buried" wheels look, personally, if you get my meaning. My driveway is on a bit of a slope, and I have several areas on my drive to work that are already problematic with my slightly lowered ride. I'd appreciate any helpful info you can give me. Last edited by tRidiot; 08-20-2019 at 12:40 PM. |
08-20-2019, 03:54 PM | #23 (permalink) | |
Elite Member
Join Date: Jun 2012
Location: Calgary
Posts: 13,973
Drives: 14 PW 370Z S/T MT
Rep Power: 243722 |
Quote:
Wheel diameter has no effect on the offset. Only width and offset of the rim needs to be considered for fitment. And the width and height of the tire of course (this is where the rim diameter comes into play).
__________________
Member of kenchan's "photoshopped mods" and "proper offsets" gang.
|
|
08-20-2019, 08:48 PM | #26 (permalink) | ||
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
This really, really REALLY isn't that hard.
The lower the offset, the more the wheels stick out toward or past the fender. The higher the offset, the further recessed they are in. For example: a 20x10 wheel with a +15 offset sticks out further than one with +30 offset Width has a similar effect because . . . well, the wheel is fuckin' wider. Same offset, wider wheel, the outside edge goes further away from the hub and toward or past the fender The offset and widths i suggest work because . . . plenty of people have ACTUALLY USED THEM BEFORE AND THEY WORK: Quote:
Quote:
Unless the chassis is brand spanking new, OR you are running super aggressive sizing with super low stance and some sort of fender modes (roll/pull/wide fender), there is no need to break out a tape measure and get under your car and measure ****. Just look at what other people have done and copy the one you like best. It ain't rocket science, and every single year and every single trim of Z has the same fender (except the newer Nismos which have the stupid fender flare that needs to be removed first) And from others examples you can use as a baseline to find what you want Your car sees no track time Your car doesn't have coilovers and adjustable arms, and it doesn't seem like you care to add those parts Your fenders are not rolled or pulled You have the most conservative setup imaginable Get the simplest fitment If you REALLY tripping about the sizes i suggested being in the "red zone", just add 5 mm to each. You car won't look good either way at your height, so what the heck! Go even safer! and for $2k you can probably get close to a used set of TE37's with better looks, less weight, and more strength than that Savini luxury wheel POS
__________________
OptionZero Build Thread |
||
08-25-2019, 09:05 PM | #28 (permalink) |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
I think I've decided to skip the Savinis and go with the Forgestar CF5-V. I'm also going to get coilovers, so I can go a little lower. I'm still not going to go crazy, but it will give me a slightly better look and I can go more aggressive on the offsets.
So I guess the only thing I need to decide is if I want the 19s with an SDC rear, or just go with the 20s and the Deep Concave x4. The 20s will look better with a lower drop, I think, so the SDC or DC rear is the big decision. I'm really not sure anyone can help me make that decision, it's just a matter of priorities for the look I want. Just wanted to say thank you again to everyone who has helped me out, I have learned quite a bit and am looking forward to the experience and getting my car lined out a bit more - with more planned in the future. |
08-26-2019, 06:16 PM | #29 (permalink) |
Base Member
Join Date: Oct 2013
Location: OK
Posts: 178
Drives: '09 370Z Sport
Rep Power: 9972 |
I went with the 19s, Hankook V12s, in matte gunmetal. I wanted the SDC more than I wanted the 20s, I guess.
Jason from GetYourWheels was great, answered all my questions. Big upvote for them. Wait time supposed to be like 5-7 weeks as of now - UGH! I don't want to wait that long! lol |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Savini Wheels "The Gold Standard" | GetYourWheels | Tires/Wheels | 2 | 10-24-2018 03:30 PM |
Savini Black Di Forza bs1 Wheels | eclipse860 | Wheels & Tires | 3 | 05-26-2018 11:06 PM |
[WTB] Sport wheels with decent tires SoCal | FancyPants | Parts for sale (Private Classifieds) | 1 | 03-13-2014 06:20 PM |
Wheels and Offsets | corbin09 | Wheels & Tires | 1 | 07-28-2009 01:01 PM |