NISMO Club Sport Spec Wheels.

k67p67 · 03-04-2021, 05:32 PM

You don't need extended studs in the front. By using a spacer in the front, you are making the front/rear disparity even larger. Do you also have extended studs in the rear?

Lvcky69 · 03-04-2021, 06:22 PM

Quote:

Originally Posted by k67p67

You don't need extended studs in the front. By using a spacer in the front, you are making the front/rear disparity even larger. Do you also have extended studs in the rear?

yeah I know. I found out later on after I replaced the stock studs with the extended ones on the wheel hub and not on the actual spacer. Should have known better so I left it like that for now. The rear had the extended studs on my old 20mm spacers. Which is why the new 50mm nismo lug nuts went all the way in perfectly fine on the stock studs.

k67p67 · 03-04-2021, 10:21 PM

I recommend that you get a set of regular studs and replace the ARP studs. You can use the ARPs in the rear with a 15 or 20mm v1 spacer.

Lvcky69 · 03-04-2021, 11:14 PM

Quote:

Originally Posted by k67p67

I recommend that you get a set of regular studs and replace the ARP studs. You can use the ARPs in the rear with a 15 or 20mm v1 spacer.

Yeah I will do that sometime next week. Ill order the spacers with bolts on from z1. Most likely 20mm

03-04-2021, 05:32 PM	#1 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 312 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	You don't need extended studs in the front. By using a spacer in the front, you are making the front/rear disparity even larger. Do you also have extended studs in the rear? __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

03-04-2021, 10:21 PM	#3 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 312 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	I recommend that you get a set of regular studs and replace the ARP studs. You can use the ARPs in the rear with a 15 or 20mm v1 spacer. Lvcky69 likes this. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2018 Nismo LM GT4 Omori Spec Wheels New Limited Release	KamiSpeed	Wheels & Tires	16	02-15-2019 10:58 PM
DBA Club Spec HERO T3 Slot 2 Piece Front Rotor BLOW OUT!	Joe@ZSpeed	Suspension/Brakes	8	08-25-2013 07:13 PM
DBA T3 club spec 4000 rear, 5000 front	Reaper42	Brakes & Suspension	9	07-27-2012 05:50 PM
New Wheels New Wheels!!!! Volk RE30 Club Sport	KamiSpeed	Wheels & Tires	28	10-25-2011 11:56 AM
Buddy club racing spec condenserII has anyone tried?	thatscrayZ	Audio & Video	2	07-29-2011 04:32 AM