advan gt sizing question

justin_boy · 11-14-2018, 01:21 PM

Hey Guys,

I want to order advan gt's in racing white

specs

f 18 x 10 et 35

r 18 x 12 et 27

tires are toyo R888R

f 275/35/18

r 305/35/18

I am lowered on KW V3's and I will lower accordingly so I am not really worried about fender clearance on the outside. My main concern is inside clearance ie coil overs and what not

So we called Mackin Ind and he said they wouldn't recommend going so aggressive because those would be sizes for a wide body?

Its basically only pushing out the wheels 10 mm on the outside, so that is why i'm concerned about inside clearance

thanks in advance!

Hotrodz · 11-14-2018, 01:36 PM

Quote:

Originally Posted by justin_boy

Hey Guys,

I want to order advan gt's in racing white

specs

f 18 x 10 et 35

r 18 x 12 et 27

tires are toyo R888R

f 275/35/18

r 305/35/18

I am lowered on KW V3's and I will lower accordingly so I am not really worried about fender clearance on the outside. My main concern is inside clearance ie coil overs and what not

So we called Mackin Ind and he said they wouldn't recommend going so aggressive because those would be sizes for a wide body?

Its basically only pushing out the wheels 10 mm on the outside, so that is why i'm concerned about inside clearance

thanks in advance!

I run 18x10.5 +30 front and 18x10.5 +30 with a 15 mm spacer with 295 30 square with zero issues. I also run 18x11+18 square with 315 30 and no issues. You are only adding .5 inch in diameter so I don't see an issue.

Sent from my SM-G965U using Tapatalk

justin_boy · 11-14-2018, 03:11 PM

Quote:

Originally Posted by Hotrodz

I run 18x10.5 +30 front and 18x10.5 +30 with a 15 mm spacer with 295 30 square with zero issues. I also run 18x11+18 square with 315 30 and no issues. You are only adding .5 inch in diameter so I don't see an issue.

Sent from my SM-G965U using Tapatalk

I just ordered them! I think I should be good

God-Speed · 11-14-2018, 04:40 PM

Quote:

Originally Posted by justin_boy

I just ordered them! I think I should be good

Make sure to post of some pictures of these when you get them on!!

justin_boy · 11-14-2018, 05:10 PM

Quote:

Originally Posted by God-Speed

Make sure to post of some pictures of these when you get them on!!

Will do! This was the last step

justin_boy · 11-14-2018, 05:11 PM

So I want to order project lug nuts and the r40 comes open ended. Do I have to worry about rust living in la?

OptionZero · 11-14-2018, 07:54 PM

cancel your order, **** those sizes

Advan GT's are nearly $1k per wheel. You're gonna spend $4k on wheels . . . and get WEAK SAUCE FITMENT? Why not light your money on fire?
Thats like buying really, super nice suit, but in a size too small so you look like a goof

You want:
20x10.5 +24 w/ 285/30/20
20x12 +20 w/ 325/25/20

AlWakRa · 11-15-2018, 05:31 AM

What is your main purpose OP? Is it track or street, r888r are very noisy for a street tires, if track, I think better to go 18x10 +22 front and 18x11 +15 rear with negative camber with your tire sizes to get similar look tires fitment, my car looks goofy with one perfect fitted tire, and one stretched.

Quote:

Originally Posted by OptionZero

cancel your order, **** those sizes

Advan GT's are nearly $1k per wheel. You're gonna spend $4k on wheels . . . and get WEAK SAUCE FITMENT? Why not light your money on fire?
Thats like buying really, super nice suit, but in a size too small so you look like a goof

You want:
20x10.5 +24 w/ 285/30/20
20x12 +20 w/ 325/25/20

I agree, buying right the first time is best option. I think 18 looks nice on 370z, but for a track car

For street or show car, 19/20 will look nicer.

justin_boy · 11-15-2018, 01:55 PM

Quote:

Originally Posted by AlWakRa

What is your main purpose OP? Is it track or street, r888r are very noisy for a street tires, if track, I think better to go 18x10 +22 front and 18x11 +15 rear with negative camber with your tire sizes to get similar look tires fitment, my car looks goofy with one perfect fitted tire, and one stretched.

I agree, buying right the first time is best option. I think 18 looks nice on 370z, but for a track car

For street or show car, 19/20 will look nicer.

18 x 10 et 22 is too aggressive and I rub in the front. I see what your'e saying although if I can fit a 12 I'll just go up in size next set if they look too stretched. Also yes they are noisy but its a weekend car so why not, and the go-kart feel doesn't hurt

justin_boy · 11-15-2018, 02:02 PM

Quote:

Originally Posted by OptionZero

cancel your order, **** those sizes

Advan GT's are nearly $1k per wheel. You're gonna spend $4k on wheels . . . and get WEAK SAUCE FITMENT? Why not light your money on fire?
Thats like buying really, super nice suit, but in a size too small so you look like a goof

You want:
20x10.5 +24 w/ 285/30/20
20x12 +20 w/ 325/25/20

damn 20's son. I had the stock 19's on my last z and it just looked kinda cartoonish at times....too big for the car imo. If you want it to look right you gotta go lowwww

OptionZero · 11-15-2018, 06:34 PM

Exactly

Get coilovers and arms and do the damn thing right

$4k on wheels and cheaping out in suspension ? Makes nonsense to me

Do you buy thousand dollar suits and wear sandals to work?

This is a prime example of why you gotta plan out your mods ahead of time.

Also, V3's don't even go that low. I think the lowest setting will still leave a 2 finger gap, so if you're worried about being "too low" . . . nah

20's and no rubbing, room to go lower, room to go higher and still look fine

Its ludicrous to think 19's are too big for the Z. They have MASSIVE wheel wells, and hell, the STOCK NISMO comes with 19's

justin_boy · 11-15-2018, 09:06 PM

Quote:

Originally Posted by OptionZero

Exactly

Get coilovers and arms and do the damn thing right

$4k on wheels and cheaping out in suspension ? Makes nonsense to me

Do you buy thousand dollar suits and wear sandals to work?

This is a prime example of why you gotta plan out your mods ahead of time.

Also, V3's don't even go that low. I think the lowest setting will still leave a 2 finger gap, so if you're worried about being "too low" . . . nah

20's and no rubbing, room to go lower, room to go higher and still look fine

Its ludicrous to think 19's are too big for the Z. They have MASSIVE wheel wells, and hell, the STOCK NISMO comes with 19's

Watchu mean I have spl rear camber arms. I’m running -2.5 all around
Also your ride looks sweet!

OptionZero · 11-16-2018, 12:49 AM

If you have all the adjustable arms there is even LESS REASON TO 18s

justin_boy · 11-16-2018, 08:49 AM

Quote:

Originally Posted by OptionZero

If you have all the adjustable arms there is even LESS REASON TO 18s

Honestly I’ve had both and like the look of 18’s much more when they’re super concave, whatever tickles my pickle doesn’t have to tickle yours. The te’s look sweet by the way. I was stuck between these two.

AlWakRa · 11-16-2018, 05:10 PM

Quote:

Originally Posted by justin_boy

Watchu mean I have spl rear camber arms. I’m running -2.5 all around
Also your ride looks sweet!

Look at this post if you have -2.5 camber all around, it will be tucked, unless you are after this look

[Official] 370z wheel fitment guide (pics/specs) only

11-14-2018, 01:21 PM	#1 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	advan gt sizing question Hey Guys, I want to order advan gt's in racing white specs f 18 x 10 et 35 r 18 x 12 et 27 tires are toyo R888R f 275/35/18 r 305/35/18 I am lowered on KW V3's and I will lower accordingly so I am not really worried about fender clearance on the outside. My main concern is inside clearance ie coil overs and what not So we called Mackin Ind and he said they wouldn't recommend going so aggressive because those would be sizes for a wide body? Its basically only pushing out the wheels 10 mm on the outside, so that is why i'm concerned about inside clearance thanks in advance! Last edited by justin_boy; 11-14-2018 at 01:24 PM.

11-14-2018, 07:54 PM	#7 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	cancel your order, **** those sizes Advan GT's are nearly $1k per wheel. You're gonna spend $4k on wheels . . . and get WEAK SAUCE FITMENT? Why not light your money on fire? Thats like buying really, super nice suit, but in a size too small so you look like a goof You want: 20x10.5 +24 w/ 285/30/20 20x12 +20 w/ 325/25/20 Steeles350 likes this. __________________ OptionZero Build Thread Last edited by OptionZero; 11-15-2018 at 12:40 AM.

11-15-2018, 06:34 PM	#11 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Exactly Get coilovers and arms and do the damn thing right $4k on wheels and cheaping out in suspension ? Makes nonsense to me Do you buy thousand dollar suits and wear sandals to work? This is a prime example of why you gotta plan out your mods ahead of time. Also, V3's don't even go that low. I think the lowest setting will still leave a 2 finger gap, so if you're worried about being "too low" . . . nah 20's and no rubbing, room to go lower, room to go higher and still look fine Its ludicrous to think 19's are too big for the Z. They have MASSIVE wheel wells, and hell, the STOCK NISMO comes with 19's __________________ OptionZero Build Thread Last edited by OptionZero; 11-15-2018 at 07:12 PM.

11-16-2018, 12:49 AM	#13 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	If you have all the adjustable arms there is even LESS REASON TO 18s __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
May Shipment Yokohama Advan Racing GT Wheels Aggresive 18" Sizing	KamiSpeed	Tires/Wheels	16	07-25-2014 09:24 PM
Question about rim sizing	imwazn	Wheels & Tires	2	11-22-2013 11:33 PM
Wheel sizing vs. power question	VegasZ	Wheels & Tires	28	04-06-2012 02:37 AM
Question about pricing/sizing used rims	My_third_Z	Wheels & Tires	2	05-23-2011 07:45 PM
TE37 SL sizing question	VancouverZ34	Wheels & Tires	4	05-15-2011 09:17 PM

11-14-2018, 05:11 PM	#6 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	So I want to order project lug nuts and the r40 comes open ended. Do I have to worry about rust living in la?