25mm Spacer Help
 

Can anyone confirm that 25mm rear bolt on spacers will clear the OEM studs? New wheels do not have indention/cut out for the studs so the spacers must sit flush. I searched the forums, called Z1 but no one can 100% confirm.

Any help would REALLY be appreciated!

I just put 20mm spacers on the rear of my car. The studs were peaking out just a little. My wheels have very shallow indents but still managed to fit.

Best bet is to just try it out. If you can find it on Amazon, you can return it hassle free if they dont fit :tup:

I think 25mm you should be safe. Do your wheels have absolutely no indent?

Absolutely zero indention. I already had 20mm spacers on and when I went to swap the wheels they hit. New wheels look like butt with the rears sunk in. Offset was already WAY too high but the wheel price was excellent.\ so... I'm going crazy over here. Just about broke out the cutting wheel, a dye and went to work! Ha!

Thanks for the input brother.

I ordered them up from Z1 so it looks like I'll answer my own question and update accordingly.

It should just be good enough.

I was using 20mm sumo power spacers and the studs were barely peeking out.

Nothing like a good deal haha. I got cheap wheels for winter, luckily they had an offset of 25 already. Added a 20mm spacer and it was nice and flush with the fender.

Keep us posted!

Installed today. Cleared by a HAIR and I mean that fairly literally. I was on stand by with by grinder and a 25 x 1.25mm dye just in case.....didn't need it. :)