Anyone have a setup of 15mm spacers in front and 20 rear?

Snakebite202

RCZ, that stance is sick man. Looking good! I did want to ask if the car handles [noticeably] better with your camber set up?

G35guy84

I just lowered my car about 1" all around and I wanna know if anyone has done 25mm spacers in the rear. I like RCZ's setup, but I think it could go out a wee bit more both in the front and in the rear. I was thinking about doing 20mm front/25mm rear. What do you think? Would it stick out too far? If anyone's got 25mm spacers in the rear with the 19" Rays with pics, that would be great!

__________________
'09 Nissan 370Z Base 7AT - Sport Package - Pearl White | Performance Mods: Stillen G3 CAI | F.I. HFC | F.I. TDX CBE w/ 18" resonators | Megan Racing coilover kit | Ichiba rear camber kit | 20mm front / 25mm rear H&R spacers | Aesthetic Mods: White interior/license plate LEDs | 6000K bulbs | 20% tint

ZForce

Mike has 25mm in the rear, check out his garage or posts. I still have not installed my 25mm rears. Although I heard 20mm in the front will rub. Seems 15mm is the one to go with for fronts. Note these sizes are for the 19" sport rims.

RCZ

Mike has them, but Mike has different wheels. It looks great in his case, but I think 25 rear on the stock 19s will push the tires outside the fenders. If you like that 4X4 look, then awesome, but I love the flush with the fender look. Also remember, my front look a little sunk only because of the negative camber. If I had less aggressive camber, It would look pretty flush. I can definitely get you guys a good deal through the connections I made when getting mine, so if anyone is serious about buying a set, let me know.

phantom21

RC is a great guy to deal with!! I've been back and forth with him on my set-up for over a week. He's been very patient and full of info. He has also hooked me up with a pretty darn good price. Give him a shot if you are interested.

__________________
2009 PG 6spd Sport || 30% side tint, 15% rear || All Redline fluids || Berk HFC's intalled~PITA Bolt || Stillen G3's || Berk CBE || BC Racing Coilovers with 10K/12K Swift springs & RA valving|| SPL rear camber arms || 20mm/15mm spacers

RCZ

Thanks man, your car is going to be so ridiculous when you install all that stuff! You don't even know whats coming. If it doesn't put a smile on your face when you drive it, money back guarantee!

Mike

but my wheels are nismo wheels with the exact same offsets and specs as the factory wheels.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

RCZ

Oh yeah? I could have sworn they were lower offset than the 19's.

Wait..which factory wheels are you talking about?

m4a1mustang

Good thread. I am going to be ordering the 15/20 H&Rs myself. RCZ, your car looks sick!

__________________
- Steve

Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!)
LIKE us on Facebook!

Mike

19" Nismo S-tunes and 19" sport wheels.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

RCZ

^ well Mike, your car looked pretty good when I saw the pictures. I still gotta say I dont like wheels and tires coming out past the fender line.

Mike

I agree, but mine are tucked. I was happy with the look of 20s, but not happy that the original studs protruded about 1/2mm and kept the wheels from fully seating.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

G35guy84

^^ So Mike, those wheels in the picture have the exact same offset as the 19" Rays wheels? And what size spacers are you running in the front? If you've got 15mm, do you think 20mm would be too much? I'm either going with 15mm front/20mm rear or even better I'm thinking about 20mm front/25mm rear. What do you think?

__________________
'09 Nissan 370Z Base 7AT - Sport Package - Pearl White | Performance Mods: Stillen G3 CAI | F.I. HFC | F.I. TDX CBE w/ 18" resonators | Megan Racing coilover kit | Ichiba rear camber kit | 20mm front / 25mm rear H&R spacers | Aesthetic Mods: White interior/license plate LEDs | 6000K bulbs | 20% tint

Mike

Yes, from Nissan's site:
■Lightweight forged aluminum-alloy
■19" x 9.0" +47mm offset (front); 19" x 10.0" +30mm offset (rear)

and the owners manual for the 19s:
Front: 19 x 9J 1.85 (47)
Rear: 19 x 10J 1.18 (30)

20s would probably fit fine in front, but I am happy with 15s in front.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

RCZ

Mike I thought you had 20 front 25 rear?