LMGT4 on 370z

Vizzy_v2

Alas, my first post after lurking on here for a fairly long time. I wanted to share with all of you my very first time buying a new set of wheels for my car. For those who don’t know or didn’t read the title these are the 2017 Omori LMGT4 matte black Nismo wheels. I went for a staggered setup w/ (front) 18x9.5 + 12 and (rear) 18x10.5 + 15. The tires are hankook Ventus v12 evo2 k120. Front tire sizes are 245-45-18 and the rear sizes are 275-40-18. The only things I was really worried about were the front wheel offsets and if (1) they would clear the Akebono Brakes and (2) how much would they poke out if it did. Luckily, I reached out to Josh@kamispeed and he cleared it up for me. I’m honestly super stoked about these wheels. I knew how rare and equally expensive these wheels were but in my eyes they were definitely worth it. I want to give a huge shoutout to Josh@kamispeed for helping me out and your great customer service through this process. I also want to give a huge shoutout to everyone here on the forums. I have done extensive searching looking at everyone’s tire choices, offsets, wheel brands and why they chose them. You all have helped me make my first purchase of wheels one to remember .

P.S. - I know my car is dirty

Side view:


Rear:


Front:


Front poke:


New lug nuts:

NorthStyle

Love the wheels but they just look so small on the Z... maybe because your car doesn't appear to be lowered. RAYS really needs to release a 19-inch version.

OptionZero

Awesome wheels

too small for this chassis

perfect for S13/14/15/R32/33/34/Z32

__________________
OptionZero Build Thread

Nixin

Did anyone mention to you, off the record of course, that your Z is dirty? Just kidding. Nice wheels! But they do need to be a touch bigger. I agree with the other forum bros, 19" would be about perfect.

OptionZero

black makes any wheel look smaller
combo that with a black car and you basically just have a formless blob
can still see the wheel gap even tho thats also black

Nismo/Rays are stupid for not doing a 20 inch version for GTR/370Z

but then again. . . there's the Advan GT

__________________
OptionZero Build Thread

Vizzy_v2

Trust me I would have much preferred these in 19” if they had them. The wheel gap does look huge though. Just ordered some Swifts and it’ll look much better once it’s lowered.

Raidernation

I think the wheels look good. Thanks for sharing the pics. I always wondered what these wheels would look like.

__________________
2016 7AT GM Base: Fast Intentions CBE 18" Res, Z1 Rear Diff Cover, Quaife LSD, Nismo S-Sport Suspension, Nismo Body Brace Kit, White Line Front Sway Bar, SPL Front End Links, Energy Rear Bushing, Z1 Post MAF Silicone Tubes w/ K&N Drop-in Filters

Memphis370Z

Congratulations and welcome.

Josh was extremely helpful when I bought my wheels.

KamiSpeed

They came out great man! But yeah, a little bit for a drop will def set them off!

__________________

SS_Firehawk

Just needs a mild drop and it will sit pretty

__________________

DarkJak

Insanely jealous. I'd have gotten them in 18" too if I had the funds for them myself.

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668

OptionZero

20 inch version, lol:

__________________
OptionZero Build Thread

Quicksilvers

Those are some beautiful wheels very nice. I second installing some springs.

2011 Nismo#91

They look very nice!

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

Ventruck

I've been in the "wish they came in 19's" camp, but nonetheless great that they clear the brakes.