i need help with fitmen
 

i have work emotion cr2p front 19 9.5/rear 10.5 +22 and im on bag 3h lift kit but i want the rims to be more out to the fender if u know wat i mean here a photo of it now. If you think i need spacer how much??and any brand or kinds?? https://uploads.tapatalk-cdn.com/201...45d4982e5e.jpg


Sent from my iPhone using Tapatalk

Read any of the ******* wheel fitment threads

How did u not plan this out before getting bags?
Those sizes would be sunk on stock suspension

With the way your tires sit with the car air'd out... it looks like you'd need a spacer over an inch/25mm. But, it could just be the faux flares giving making it appear like you have more space than there actually is.

I'd measure, buy a cheap set of spacers in multiple sizes for testing, find your fitment, then sell everything and with your newly acquired knowledge buy a new set of wheels with proper offsets.

....or do like O.Z. said and read through some of the wheel fitment threads.

Buys wheels without any concept of wat to buy....


Sent from my iPhone using Tapatalk

Less camber? Look at the relation of the poke of the bottom of the wheels VS the top. Those specs are near flush- if your camber isnt so negative.

its not a camber issue, those sizes are just trash

AND he's on bags, so its REALLY not a camber issue

Cheaper way... spacers
Right way... lower offsets

spacers are not practical in his case

You need to take a picture of it lifted up on the bags at riding height to see how much you need to adjust. It appears new wheels are order. Those offsets are way off.

And the drop on bags is “practical”?

What’s your thoughts though on the spacers to resolve the issue? No go?

If you're intent on keeping those wheels, you could lose the fender flares and add 20mm bolt-on spacers front and rear.