Wheel offset help
 

Can someone tell me if these sizes will fit well. I'm ok with flush just wanna make sure they do not stick out. If someone can give me an idea of wat that's gonna look like. Thanks!!

Front 19x 9.5 offset +24
Rear 19x 10.5 offset +23

Depending on your camber,,,but if stock
Your front's wheel lip's will be close to flush with top of fender & Rear's will be sunk in roughly 1/2".

A general rule of thumb on these car's....with 1" staggered wheel's.
You want to be about 10-15mm more aggressive on the wider rear wheel's.
example 9.5+25,10.5+12
Lowered & different cambered settings will make huge changes.

Thanks! My biggest concern was so that they do stick out past the fenders. I am lowering my car a lot and I want to adjust my wheels so that they are not negative camber. I want for wheels to be straight and be somewat slammed. To have good traction and tire wear. Once I do positive camber or w e it's called to straighten them after the drop and align 100% I will add needed spacers for flush fitment with somewat stretched tire. Lmk if yiu think I'm missing something. Thanks!

What tire sizes are you thinking of going with lowered?

Not sure still doing some research. Want them to be stretched. Maybe 235 fronts and 245 rear

You need to do way more reading

19x10.5 +23 is the same as stock rear nismo and that's comes with a 285/35 tire ... and it's hella sunk. U can run up to a 325 on that wheel


Fronts are about the same spec as generic te37 fitment come in, 19x9.5 +22, and people go up to 265 on that

U are far underestimating the 370's clearance bc those sizes are pretty conservative