Hubcentric rings

SG4247 · 09-16-2017, 04:11 PM

I bought mine off e-bay for cheap.

They have a lip on them that interfered with my Enkei wheels. So, I took them to a local machine shop and had the lip turned off for $10.

Now, they fit perfectly and the car is vibration free up to 120.

jchammond · 09-16-2017, 04:39 PM

The rings will help to center up the wheel & if those lugnuts have a 60* bulge seat...be sure & have some good ones.
I'd find out peak torque on the studs you're using & pull them tighter than 80 ft.lbs.
80 is for the shank style oem factory lugnut's.
My Forgestars came w/rings & I also replaced my studs...as I pull quite a few more pounds than that.

jchammond · 09-16-2017, 04:48 PM

Quote:

Originally Posted by Sway

You can slightly feel it through the pedal, but it's mostly audible. Loud radio or mid to high rpm acceleration the exhaust noise covers it up. Doesn't translate through the steering wheel. I don't think it has anything to do with the brakes as it literally popped up after I put the wheels on, brakes were fine no wobble or unbalanced feeling, to it being there the same day. It's not bad, but it's more than enough to annoy me.

I installed the wheels myself originally, used 82 ft lbs, in a star pattern... yesterday discount did their thing balanced the wheels and put them back on, and it's still there. So unfortunately I don't think that's the problem either

Edit: I ordered a set of 73 outer 66.1 inner hubcentric rings just in case. I'm willing to lose $20 just to make sure...

stabbing hard on the brakes @60mph & light grip on the steering wheel,will tell you if rotor's are warped...also don't ever touch them with your fingers while your wheel's are off; it can put oil from your skin on them.

A wheel that has a slight amount of lateral or radial runout will "0" out a balance machine,,,but the tire tech should see this & inform you.

The hub rings will help & use nut's with the correct "bulge/seat" as this is very important.

09-16-2017, 04:39 PM	#17 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	The rings will help to center up the wheel & if those lugnuts have a 60* bulge seat...be sure & have some good ones. I'd find out peak torque on the studs you're using & pull them tighter than 80 ft.lbs. 80 is for the shank style oem factory lugnut's. My Forgestars came w/rings & I also replaced my studs...as I pull quite a few more pounds than that. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H&R Wheel Spacers, 5-25mm!! Built-in Studs AND Hubcentric Rings!!	Mike@Czp	Tires/Wheels	391	06-01-2018 12:27 PM
Hubcentric rings ?	DannyGT	Wheels & Tires	18	07-06-2016 04:17 PM
[FOR SALE] ichiba 15mm spacers with hubcentric rings	1LIFE	Parts for sale (Private Classifieds)	1	01-23-2014 02:14 AM
Hubcentric Rings	a6walter1	Wheels & Tires	3	05-30-2013 04:39 PM
Aluminum Hubcentric Rings	Z1Performance	Tires/Wheels	0	11-23-2009 06:35 PM