Fitment Confirmation please
 

Hi all

Planning ahead to replace the OEM rims on my 2016 Nismo 370z. Really want to put a set of silver Judd T311R rims on. The only spec they do that I can see will get close is 19x9.5 ET40 rear and 19x9.5 ET23 front (pretty close). My question is by simply adding a 10mm spacer to the 19x19.5 rears will I get back to stock (19x10.5) ?. Want the rears to be flush so don't want to get the set up wrong.

Help from the experienced ones on here would be greatly appreciated.

Martin:driving:

9.5 is the width of the rim. Adding a spacer does not change the widths of the rim, it only changes the offset. So instead of 40, it will be 30. 9.5 is way to narrow for the rear.

Thanks. Looks like its 20s then if I want to go Judd. Does anyone on here that you know of run 20 inch Judd t311r's.

Love your car buddy by the way, looks great.
Martin

Thank you.

You are not lowered probably, so this set up will not help you much, but here is one.

http://www.the370z.com/wheels-tires/...ml#post3219554

There are many similar 10 spoke concave options out there, if you want to get better sizing.

Cooltoy.Will be lowered on Tein Springs.Thanks for the above.Sold my modified 350z to step up.White Nismo 370z arrives in August.Ark dual grip exhaust and intakes are in the garage waiting.Want to get the rims sorted in my mind.

OK. Then that car might be a good example.

I would look at the Vossen x work wheels VW1

Thanks. Will do.