Wheel too outside HELP!

Nizmo.Man · 03-15-2017, 12:55 PM

Quote:

Originally Posted by Sharpinou

Little question, I don't know if it can be that....is it possible that my brake disc in front is thicker so my wheel poke out more than it should? For sure the drop on the car have an effect.

Dallaz Z is stock camber and 1.2 in drop so same as mine but I have not ride the car yet...I will let suspension settle a bit and put 10mm spacer on the rear and see what are the results.

I let you guys know! Tks

Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck

kenchan · 03-15-2017, 08:23 PM

Quote:

Originally Posted by Nizmo.Man

Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck

for u, run more neg camber up front (a-arms) and get some nismo fender fare pieces. dat is an easy and quick way to lessen da poke.

Sharpinou · 03-15-2017, 08:27 PM

Quote:

Originally Posted by kenchan

for u, run more neg camber up front (a-arms) and get some nismo fender fare pieces. dat is an easy and quick way to lessen da poke.

Tks Kenchan for your help. I will put 10mm spacers on da rear and i will let the car settle. Let you know if I need A arm in 2 weeks!

Sharpinou · 03-15-2017, 08:24 PM

Quote:

Originally Posted by Nizmo.Man

Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck

Ok tks but I will just put a spacer of 10mm in the rear and I will see. I will get her out in 2 weeks so...I have to wait.

CCastro · 03-16-2017, 11:40 AM

Quote:

Originally Posted by Nizmo.Man

Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck

That just sounds like bad wheel choice.

Nizmo.Man · 03-16-2017, 12:44 PM

Quote:

Originally Posted by CCastro

That just sounds like bad wheel choice.

Was in a rush after a got a bend on my first set :/. The guy said it would fit perfect on the Z but I have the Nismo with Akebonos and they don't clear them, Just the stock calipers....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 wheel spacers smaller dia then wheel?	Jhill	Wheels & Tires	5	10-25-2016 06:19 PM
Adam's Wheel Woolie Premium Wheel Cleaning Tools	AdamsPolishes	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	0	06-13-2012 05:33 PM
Steering wheel controls and aftermarket wheel	Perf.Des	Exterior & Interior	11	03-03-2012 02:29 PM
[WTB] Oem sports wheel trade for after market wheel	azn_kiddd	Parts for sale (Private Classifieds)	6	11-23-2011 05:02 PM
wheel/steering wheel shake	dbayb	Wheels & Tires	12	10-22-2011 07:59 AM