03-15-2017, 07:10 AM
|
#21 (permalink)
|
|
A True Z Fanatic
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521
|
Quote:
Originally Posted by Sharpinou
Hi there
Now i see...comparing my pictures of my Z to his. Its muuch lower... :S I have done what you told me, reinstalled everything with a load on a spring, torque everything as per manual. It changes a little bit. Here the results.
Here some pics of my Z and on the picture I have a 5mm spacer on the rear. Can't put a 10mm with the factory studs but 5mm is perfect for my taste. If I can have this front a little bit inside the fender that will be great or put a 10mm on the rear...or A-arm? What do you think?
3rd picture is the kind of spacer I have on the car right now
Tks!  |
sounds good. id get 10mm for da rear and you should be fine. if u can find a front splitter dat wiil lessen da poke look on da front but not needed. with a 5mm spacer u can usually get away without changing studs but i recommend u use steel lugs (Muteki)
|
|
|
Similar Threads
18Likes
Threaded Mode
