Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Wheels & Tires (http://www.the370z.com/wheels-tires/)
-   -   Wheel too outside HELP! (http://www.the370z.com/wheels-tires/120391-wheel-too-outside-help.html)

OptionZero 03-15-2017 01:10 PM
Quote:
Originally Posted by Sharpinou (Post 3627652)
Little question, I don't know if it can be that....is it possible that my brake disc in front is thicker so my wheel poke out more than it should? For sure the drop on the car have an effect.

Dallaz Z is stock camber and 1.2 in drop so same as mine but I have not ride the car yet...I will let suspension settle a bit and put 10mm spacer on the rear and see what are the results.

I let you guys know! Tks
what. the. fuc.k?

CCastro 03-15-2017 01:30 PM
Quote:
Originally Posted by Sharpinou (Post 3627652)
Little question, I don't know if it can be that....is it possible that my brake disc in front is thicker so my wheel poke out more than it should? For sure the drop on the car have an effect.

Dallaz Z is stock camber and 1.2 in drop so same as mine but I have not ride the car yet...I will let suspension settle a bit and put 10mm spacer on the rear and see what are the results.

I let you guys know! Tks
DAFUQ? :icon14:

What are you trying to say? Are your rotor aftermarket and you think the hats are too thick? You chose the wrong offset wheels and by Z standards it doesn't poke as you say it does.

OptionZero 03-15-2017 01:37 PM
i think we have identified the problem

it is not the wheels
it is not the car

CCastro 03-15-2017 01:41 PM
Dude... throw the rear spacer on, get an alignment, call it a day.

kenchan 03-15-2017 08:23 PM
Quote:
Originally Posted by Nizmo.Man (Post 3627661)
Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck :driving:
for u, run more neg camber up front (a-arms) and get some nismo fender fare pieces. dat is an easy and quick way to lessen da poke.

Sharpinou 03-15-2017 08:24 PM
Quote:
Originally Posted by Nizmo.Man (Post 3627661)
Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck :driving:
Ok tks but I will just put a spacer of 10mm in the rear and I will see. I will get her out in 2 weeks so...I have to wait.

Sharpinou 03-15-2017 08:27 PM
Quote:
Originally Posted by kenchan (Post 3627843)
for u, run more neg camber up front (a-arms) and get some nismo fender fare pieces. dat is an easy and quick way to lessen da poke.
Tks Kenchan for your help. I will put 10mm spacers on da rear and i will let the car settle. Let you know if I need A arm in 2 weeks! :)

CCastro 03-16-2017 11:40 AM
Quote:
Originally Posted by Nizmo.Man (Post 3627661)
Yes, the rotors have a slightly different shape from the rear to the front. I'm having this issue as well as my wheels have a lip and my front wheels hit the caliper, rears are fine. Running 9.5 front 10.5 rear both +22 offset. Have 20mm spacers on front and am clearing the caliper but my wheels now poke. Just have to live with it or get new wheels like the other gents said. Good luck :driving:
That just sounds like bad wheel choice.

TerribleONE 03-16-2017 11:47 AM
:facepalm:

Nizmo.Man 03-16-2017 12:44 PM
Quote:
Originally Posted by CCastro (Post 3628162)
That just sounds like bad wheel choice.
Was in a rush after a got a bend on my first set :/. The guy said it would fit perfect on the Z but I have the Nismo with Akebonos and they don't clear them, Just the stock calipers....:(

OptionZero 03-16-2017 12:53 PM
people buying wheels without knowing anything about fitment

esp on a Z which can fit ******* bomb sizes for either track or street

just a waste of a chassis

track guys are running 18x10.5 +15 to +30 on 285 and bigger tires

stance guys can run negative offsets on bags

modest sizing 19x9.5 +22/19x10.5 +12 on budget coils or shock/spring

full suspension mods like me 20x11 +15 and 20x12 +20

its not that hard if you just browse some of the fitment threads, why are people messing this up

Sharpinou 03-20-2017 07:39 PM
1 Attachment(s)
Quote:
Originally Posted by kenchan (Post 3627550)
sounds good. id get 10mm for da rear and you should be fine. if u can find a front splitter dat wiil lessen da poke look on da front but not needed. with a 5mm spacer u can usually get away without changing studs but i recommend u use steel lugs (Muteki)
Tks for everything Kenchan. Just made a roll out this weekend with my 5mm spacer in the rear and she looks so nice!!! Just a little bit more outside on the rear ( got studs and spacer 10mm in order ) and it will be perfect! :) Here a pic


All times are GMT -5. The time now is 08:19 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2