Did I go way to aggressive?

daveyyy · 02-28-2017, 04:33 PM

I ordered some Ray's Gramlight 57fxx, and now im wondering if the offset is too aggressive. I got 19x9.5 + 15(f) and 19x11 +18(r). Any thoughts? Also open to getting new tires, currently running pss in stock size (245-40-19/275-35-19). Thanks!

Aiolos · 02-28-2017, 04:41 PM

Think 305/30 rear will work with that offset fine,imo

Most go with a 20 offset in 19x9.5 fronts, only 5mm difference...

255 or 265/35 front tire should work out ok, imo

jamtinge · 02-28-2017, 04:52 PM

It depends on if you will lower your car or not. If stock, yes maybe too much.

Help Newbie

this is how much it sticks out w stock suspension, and this is only 25 offset

daveyyy · 02-28-2017, 05:02 PM

Im currently lowered on powertrix coilovers, about 1.1 inches, planning on lowering it more if it will help the look

, and thanks for the tire recommendation.

Quote:

Originally Posted by Aiolos

Think 305/30 rear will work with that offset fine,imo

Most go with a 20 offset in 19x9.5 fronts, only 5mm difference...

255 or 265/35 front tire should work out ok, imo

Quote:

Originally Posted by jamtinge

It depends on if you will lower your car or not. If stock, yes maybe too much.

Help Newbie

this is how much it sticks out w stock suspension, and this is only 25 offset

OptionZero · 02-28-2017, 06:57 PM

not even close to aggressive

depending on your tire size and height you may rub a bit

or

get some SPL front camber arms and you can run the rears in front

hell i'm running 20x11 +15 fronts with a 275/30/20, just to give you an idea of whats possible.

daveyyy · 02-28-2017, 07:01 PM

Alright, awesome. Yeah I have an spc rear camber kit at the moment, If I need to go lower, Im going to get a front kit for sure.

Quote:

Originally Posted by OptionZero

not even close to aggressive

depending on your tire size and height you may rub a bit

or

get some SPL front camber arms and you can run the rears in front

hell i'm running 20x11 +15 fronts with a 275/30/20, just to give you an idea of whats possible.

OptionZero · 02-28-2017, 07:04 PM

Don't waste your money on SPC

Do it once. Do it right. Get SPL

Full camber and caster adjustment, the best locking mechanism for your alignment guy to work on, high quality spherical joints that self-clean (one less rubber bushing).

Basically opens up a world of possibilities for fronts.

Rear of the Z has infinite room to fit anything already, really.

The front bumper tab is another point to look at for rubbing depending on height/tire size.

jchammond · 02-28-2017, 07:22 PM

It's all about what you want your camber set at (-2F,-2R) etc...if you use an oem diameter tire-you're gonna have to lean that sucker on the front.
Not an expert on lot's of negative camber;but by looking at your wheel spec's...the front's are way more aggressive than your rear's.

GetYourWheels · 02-28-2017, 07:51 PM

you're fine. Although i normally recommend people to run 9.5 with low +20 in the front with a meaty tire but +15 will be fine.

kenchan · 02-28-2017, 08:08 PM

Quote:

Originally Posted by daveyyy

I ordered some Ray's Gramlight 57fxx, and now im wondering if the offset is too aggressive. I got 19x9.5 + 15(f) and 19x11 +18(r). Any thoughts? Also open to getting new tires, currently running pss in stock size (245-40-19/275-35-19). Thanks!

ull need to be lowered considerably to make it look like it belongs on da front.

daveyyy · 02-28-2017, 09:50 PM

Im lowered about an inch. Think i need to go lower?

Quote:

Originally Posted by kenchan

ull need to be lowered considerably to make it look like it belongs on da front.

ChaseZ · 02-28-2017, 11:14 PM

9.5, 245 +15 with an inch drop should be pretty good. Assuming your -camber be around -1.0 or thereabouts? Will be aggressive but I certainly wouldn't say too much so.

kenchan · 02-28-2017, 11:17 PM

Quote:

Originally Posted by daveyyy

Im lowered about an inch. Think i need to go lower?

yah or get upper a-arms give it some nice camber.

daveyyy · 03-01-2017, 04:00 AM

Quote:

Originally Posted by ChaseZ

9.5, 245 +15 with an inch drop should be pretty good. Assuming your -camber be around -1.0 or thereabouts? Will be aggressive but I certainly wouldn't say too much so.

Quote:

Originally Posted by kenchan

yah or get upper a-arms give it some nice camber.

Well, I currently have a small amount of camber, only have a rear camber kit. Still need to buy a bunch of things. I've had some people tell me that SPC is good enough, which is why i bought there rear spc, but some people say SPL only... but its also a good amount more. Any thoughts on that?

Thanks for the replies as well!

jchammond · 03-01-2017, 05:41 AM

A got tire fitment size for those wheel's are 275/35,325/30's (if you want the full sized rubber look). They are usually 26.6F,26.7R on diameter.

02-28-2017, 04:33 PM	#1 (permalink)
daveyyy Base Member Join Date: Nov 2016 Location: Norcal Posts: 42 Drives: '14 370z Rep Power: 9	Did I go way to aggressive? I ordered some Ray's Gramlight 57fxx, and now im wondering if the offset is too aggressive. I got 19x9.5 + 15(f) and 19x11 +18(r). Any thoughts? Also open to getting new tires, currently running pss in stock size (245-40-19/275-35-19). Thanks!

02-28-2017, 06:57 PM	#5 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	not even close to aggressive depending on your tire size and height you may rub a bit or get some SPL front camber arms and you can run the rears in front hell i'm running 20x11 +15 fronts with a 275/30/20, just to give you an idea of whats possible. __________________ OptionZero Build Thread

02-28-2017, 07:04 PM	#7 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Don't waste your money on SPC Do it once. Do it right. Get SPL Full camber and caster adjustment, the best locking mechanism for your alignment guy to work on, high quality spherical joints that self-clean (one less rubber bushing). Basically opens up a world of possibilities for fronts. Rear of the Z has infinite room to fit anything already, really. The front bumper tab is another point to look at for rubbing depending on height/tire size. ChaseZ likes this. __________________ OptionZero Build Thread

02-28-2017, 07:22 PM	#8 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	It's all about what you want your camber set at (-2F,-2R) etc...if you use an oem diameter tire-you're gonna have to lean that sucker on the front. Not an expert on lot's of negative camber;but by looking at your wheel spec's...the front's are way more aggressive than your rear's. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-28-2017, 07:51 PM	#9 (permalink)
GetYourWheels A True Z Fanatic Join Date: Feb 2011 Location: Southern California Posts: 3,816 Drives: 2011 BMW M3 Rep Power: 21	you're fine. Although i normally recommend people to run 9.5 with low +20 in the front with a meaty tire but +15 will be fine. __________________ Email : Eddie@GetYourWheels.com \| Tel: (562)249-7184 \| Your Wheel Fitment Specialist / Wheel & Tire Deal via DM Top Tiers Dealers - Avant-Garde / Forgestar / Rohana / Stance / Vossen + More https://live.staticflickr.com/65535/...de6886f7a7.jpg

02-28-2017, 04:41 PM	#2 (permalink)
Aiolos Base Member Join Date: Jul 2016 Location: Virginia Posts: 30 Drives: 2010 370z CONV M6 Rep Power: 9	Think 305/30 rear will work with that offset fine,imo Most go with a 20 offset in 19x9.5 fronts, only 5mm difference... 255 or 265/35 front tire should work out ok, imo

02-28-2017, 04:52 PM	#3 (permalink)
jamtinge Base Member Join Date: Mar 2010 Location: Toronto, Canada Posts: 103 Drives: 2017 PW 370z MT Rep Power: 16	It depends on if you will lower your car or not. If stock, yes maybe too much. Help Newbie this is how much it sticks out w stock suspension, and this is only 25 offset

02-28-2017, 11:14 PM	#12 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	9.5, 245 +15 with an inch drop should be pretty good. Assuming your -camber be around -1.0 or thereabouts? Will be aggressive but I certainly wouldn't say too much so.

03-01-2017, 05:41 AM	#15 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	A got tire fitment size for those wheel's are 275/35,325/30's (if you want the full sized rubber look). They are usually 26.6F,26.7R on diameter. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my new aggressive look - more to come	res0zsfa	Nissan 370Z General Discussions	56	11-25-2015 07:53 AM
[WTB] Aggressive exhaust	baquero370	Parts for sale (Private Classifieds)	5	03-27-2014 10:12 AM
is this setup too aggressive	fairlady_z34	Wheels & Tires	20	10-08-2013 06:23 PM
most AGGRESSIVE 370 so far	keng714	Nissan 370Z General Discussions	147	05-02-2012 11:35 PM
yay or nay (aggressive sp3)	ilive2win	Wheels & Tires	46	10-07-2010 12:55 AM