are 45mm spacers SAFE??????

Zeetah · 07-23-2016, 03:21 PM

so i got my rims powder coated, wheels and tires installed, but the rears look bad and the shop measured it and said 45mm would make it flush, but ive been searching online and most ppl are saying there not safe and some ppl worry about even smaller spacers like 15-20mm let alone 45mm !!!!!!!!!!!!!!!!!!!!!!!!!!

now im bummed i waste money to powder coat when i should have just bought new rims wide enough without the need for spacers.

i think he said go with H&R spacers. but are those the best?

size he stated i need is 12x1.25 stud, 66.1 hub core, 45mm hub centric

ChaseZ · 07-23-2016, 03:23 PM

I didn't even know they made spacers that big. Personally that's far more than I'd be co for table with. Is it safe, I don't know that answer specifically.

Trips · 07-23-2016, 03:31 PM

Sorry to confirm what you already know and need to do.

The unfortunate lesson here is to always try to figure out how they're going to fit besides they look good.

What are the specs?

45mm spacers are just unsafe imo and I would not recommend using them.

Aces1121 · 07-23-2016, 04:24 PM

I'm going to be running a 2" spacer pretty soon

Sent from my iPhone using Tapatalk

Aces1121 · 07-23-2016, 04:25 PM

just need that extra poke

Sent from my iPhone using Tapatalk

Zeetah · 07-23-2016, 04:34 PM

I've got 245/35/20 and 275/30/20. The tire was recommended by guys on this thread and theyvery got a ton of good reviews, they even said you can go install it anywhere you want.. great.. now what do I.. I'm still learning things about cars.. wish I knew about the rims being flush before I paid to get them powdered...... sigh

Zeetah · 07-23-2016, 04:36 PM

If 45mm is unsafe, then is there a size thats guaranteed safe ?

MagmaRed370z · 07-23-2016, 04:38 PM

Quote:

Originally Posted by Zeetah

If 45mm is unsafe, then is there a size thats guaranteed safe ?

20-25 is pretty common around here.

synolimit · 07-23-2016, 07:16 PM

It's safe and I run them! Just need to make sure the hardware is correct! I have 190,000psi ARP studs holding them on and they came with 10.9 studs holding the wheels to them with red locktite. Spacers have been used for years and years ago. 2" plus! You'll be fine.

synolimit · 07-23-2016, 07:23 PM

45mm spacer question

Zbrah · 07-23-2016, 09:32 PM

ufoz8mycow · 07-24-2016, 03:09 AM

Looking at that picture you posted I cant possibly fathom why anyone would tell you that 45mm spacers are the way to go... Unless you told them you want your wheels to poke out an inch and a half past your fenders. Posting your actual wheel specs would help figure out how much of a spacer you actually need, if any.

andy_meng1024 · 07-24-2016, 04:54 AM

I saw a RWB Porsche cup car with 80mm spacers in the back last week. He's been racing for a couple seasons, so I guess it's fine.

Zeetah · 07-24-2016, 02:03 PM

Quote:

Originally Posted by ufoz8mycow

Looking at that picture you posted I cant possibly fathom why anyone would tell you that 45mm spacers are the way to go... Unless you told them you want your wheels to poke out an inch and a half past your fenders. Posting your actual wheel specs would help figure out how much of a spacer you actually need, if any.

they measured it and said 45mm would make it flush with the fenders

Zbrah · 07-24-2016, 02:05 PM

What are your wheel specs? I'm assuming you have the base 18's otherwise the tech is on dope.

07-23-2016, 03:21 PM	#1 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 11	are 45mm spacers SAFE?????? so i got my rims powder coated, wheels and tires installed, but the rears look bad and the shop measured it and said 45mm would make it flush, but ive been searching online and most ppl are saying there not safe and some ppl worry about even smaller spacers like 15-20mm let alone 45mm !!!!!!!!!!!!!!!!!!!!!!!!!! now im bummed i waste money to powder coat when i should have just bought new rims wide enough without the need for spacers. i think he said go with H&R spacers. but are those the best? size he stated i need is 12x1.25 stud, 66.1 hub core, 45mm hub centric

07-23-2016, 03:23 PM	#2 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94683	I didn't even know they made spacers that big. Personally that's far more than I'd be co for table with. Is it safe, I don't know that answer specifically. Z-Girl 12 likes this.

07-23-2016, 03:31 PM	#3 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Sorry to confirm what you already know and need to do. The unfortunate lesson here is to always try to figure out how they're going to fit besides they look good. What are the specs? 45mm spacers are just unsafe imo and I would not recommend using them. MagmaRed370z likes this. __________________

07-23-2016, 07:16 PM	#9 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	It's safe and I run them! Just need to make sure the hardware is correct! I have 190,000psi ARP studs holding them on and they came with 10.9 studs holding the wheels to them with red locktite. Spacers have been used for years and years ago. 2" plus! You'll be fine. git@no likes this. __________________ 13 370z- Last edited by synolimit; 07-23-2016 at 07:21 PM.

07-23-2016, 07:23 PM	#10 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	45mm spacer question __________________ 13 370z-

07-23-2016, 04:24 PM	#4 (permalink)
Aces1121 Base Member Join Date: Mar 2016 Location: Ct Posts: 51 Drives: 370z 40th Rep Power: 9	I'm going to be running a 2" spacer pretty soon Sent from my iPhone using Tapatalk

07-23-2016, 04:25 PM	#5 (permalink)
Aces1121 Base Member Join Date: Mar 2016 Location: Ct Posts: 51 Drives: 370z 40th Rep Power: 9	just need that extra poke Sent from my iPhone using Tapatalk

07-23-2016, 04:34 PM	#6 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 11	I've got 245/35/20 and 275/30/20. The tire was recommended by guys on this thread and theyvery got a ton of good reviews, they even said you can go install it anywhere you want.. great.. now what do I.. I'm still learning things about cars.. wish I knew about the rims being flush before I paid to get them powdered...... sigh

07-23-2016, 04:36 PM	#7 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 11	If 45mm is unsafe, then is there a size thats guaranteed safe ?

07-23-2016, 09:32 PM	#11 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	__________________

07-24-2016, 03:09 AM	#12 (permalink)
ufoz8mycow Track Member Join Date: Mar 2012 Location: Vegas Posts: 536 Drives: Black Cherry '12 Z Rep Power: 16	Looking at that picture you posted I cant possibly fathom why anyone would tell you that 45mm spacers are the way to go... Unless you told them you want your wheels to poke out an inch and a half past your fenders. Posting your actual wheel specs would help figure out how much of a spacer you actually need, if any.

07-24-2016, 04:54 AM	#13 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3381	I saw a RWB Porsche cup car with 80mm spacers in the back last week. He's been racing for a couple seasons, so I guess it's fine. __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

07-24-2016, 02:05 PM	#15 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	What are your wheel specs? I'm assuming you have the base 18's otherwise the tech is on dope. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
45mm spacer question	synolimit	Wheels & Tires	10	11-07-2015 06:21 AM
[FOR SALE] 30mm Ichiba V2 Hubcentric Wheel Spacers with Hub Centric Rings / Built In spacers	HenryLee	Parts for sale (Private Classifieds)	4	09-20-2013 03:31 PM
Are wheel spacers safe?	Guard Dad	Wheels & Tires	29	09-25-2012 09:15 AM
Just How Safe Is Your Car?	Murano405	The Lounge (Off Topic)	9	09-22-2011 09:17 PM
Is this safe?	Mr&Mrs	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	03-31-2011 08:11 AM