are 45mm spacers SAFE??????

synolimit · 07-24-2016, 02:51 PM

Quote:

Originally Posted by Zeetah

they measured it and said 45mm would make it flush with the fenders

You can't measure it. You need at add your wheel specs into an online calculator and then add what it will be with the spacer. That'll tell you your poke. Then you can measure or figure out if it'll hit the fender or such. I highly doubt unless you have a wide body a 45mm will work!

Zeetah · 07-24-2016, 07:49 PM

Quote:

Originally Posted by synolimit

You can't measure it. You need at add your wheel specs into an online calculator and then add what it will be with the spacer. That'll tell you your poke. Then you can measure or figure out if it'll hit the fender or such. I highly doubt unless you have a wide body a 45mm will work!

i got my stuff done at a reputable tire shop suggested by guys on here and plenty others, they said they did something along the lines of jacking something up and they measured the space between the tire side wall and fender and said 45 mm would be perfect and still give me room to play around without rubbing

synolimit · 07-25-2016, 08:14 AM

Quote:

Originally Posted by Zeetah

i got my stuff done at a reputable tire shop suggested by guys on here and plenty others, they said they did something along the lines of jacking something up and they measured the space between the tire side wall and fender and said 45 mm would be perfect and still give me room to play around without rubbing

That's not a good way to do it. You need your offset and give it to us. It's really easy then!

andy_meng1024 · 07-24-2016, 03:54 AM

I saw a RWB Porsche cup car with 80mm spacers in the back last week. He's been racing for a couple seasons, so I guess it's fine.

synolimit · 07-24-2016, 02:48 PM

Quote:

Originally Posted by andy_meng1024

I saw a RWB Porsche cup car with 80mm spacers in the back last week. He's been racing for a couple seasons, so I guess it's fine.

Thank you, my point exactly.

Zbrah · 07-24-2016, 01:05 PM

What are your wheel specs? I'm assuming you have the base 18's otherwise the tech is on dope.

Zeetah · 07-24-2016, 07:50 PM

everyones saying H&R spacers are really good

Zbrah · 07-24-2016, 08:49 PM

****...what are your wheel specs?

Zeetah · 08-04-2016, 02:27 PM

Quote:

Originally Posted by Zbrah

****...what are your wheel specs?

i think its +13 front and +15 rear, it doesnt say + on it, just the # on the stern site, but i think its +, id have to take a look at the rims. so what does that tell you now?

Zeetah · 07-24-2016, 09:20 PM

I mentioned the size but don't know the offset, there stern st2 rims 20 inch

madeinjapan · 07-25-2016, 07:10 AM

we arent talking a 20 + a 20 + a 5 right?

daily use perfectly fine

drag strip use nah (ebay spacers will break)

madeinjapan · 07-25-2016, 08:19 AM

OptionZero · 07-25-2016, 09:24 AM

Save your money
Buy better wheels

Zeetah · 07-26-2016, 02:15 PM

im still a newb in aspects related to cars and this was another costly mistake, like some have stated, and if i knew i would have just bought different rims that were flush with the fender. im either going to get H&R 20-25mm (the size most Z owners have gone with) or i might just leave it as is. live and learn..

thanks for all the feedback guys

madeinjapan · 07-26-2016, 02:36 PM

Quote:

Originally Posted by Zeetah

im still a newb in aspects related to cars and this was another costly mistake, like some have stated, and if i knew i would have just bought different rims that were flush with the fender. im either going to get H&R 20-25mm (the size most Z owners have gone with) or i might just leave it as is. live and learn..

thanks for all the feedback guys

Super GT Hubcentric Bolt on Wheel Spacer 5x114 66 1 45mm M12x1 25 Nissan | eBay

07-24-2016, 03:54 AM	#4 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3382	I saw a RWB Porsche cup car with 80mm spacers in the back last week. He's been racing for a couple seasons, so I guess it's fine. __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

07-24-2016, 01:05 PM	#6 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	What are your wheel specs? I'm assuming you have the base 18's otherwise the tech is on dope. __________________

07-24-2016, 08:49 PM	#8 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	****...what are your wheel specs? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
45mm spacer question	synolimit	Wheels & Tires	10	11-07-2015 05:21 AM
[FOR SALE] 30mm Ichiba V2 Hubcentric Wheel Spacers with Hub Centric Rings / Built In spacers	HenryLee	Parts for sale (Private Classifieds)	4	09-20-2013 02:31 PM
Are wheel spacers safe?	Guard Dad	Wheels & Tires	29	09-25-2012 08:15 AM
Just How Safe Is Your Car?	Murano405	The Lounge (Off Topic)	9	09-22-2011 08:17 PM
Is this safe?	Mr&Mrs	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	03-31-2011 07:11 AM

07-24-2016, 07:50 PM	#7 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 12	everyones saying H&R spacers are really good

07-24-2016, 09:20 PM	#10 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 12	I mentioned the size but don't know the offset, there stern st2 rims 20 inch

07-25-2016, 07:10 AM	#11 (permalink)
madeinjapan Banned Join Date: Jan 2016 Location: pistolvania Posts: 1,387 Drives: 2013 g37x 2014 370z Rep Power: 0	we arent talking a 20 + a 20 + a 5 right? daily use perfectly fine drag strip use nah (ebay spacers will break)

07-25-2016, 08:19 AM	#12 (permalink)
madeinjapan Banned Join Date: Jan 2016 Location: pistolvania Posts: 1,387 Drives: 2013 g37x 2014 370z Rep Power: 0

07-25-2016, 09:24 AM	#13 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,255 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Save your money Buy better wheels

07-26-2016, 02:15 PM	#14 (permalink)
Zeetah Enthusiast Member Join Date: Jan 2014 Location: Z Posts: 395 Drives: z12 Rep Power: 12	im still a newb in aspects related to cars and this was another costly mistake, like some have stated, and if i knew i would have just bought different rims that were flush with the fender. im either going to get H&R 20-25mm (the size most Z owners have gone with) or i might just leave it as is. live and learn.. thanks for all the feedback guys