ya i read your thread days ago lol..
man idk what to do..

whats a good brand?

if thats the lucky #, than i might go with that.. not sure if its worth it tho? bc 20-25 wont make it flush and not sure how much better it will look or not?

Thank you, my point exactly.

You can't measure it. You need at add your wheel specs into an online calculator and then add what it will be with the spacer. That'll tell you your poke. Then you can measure or figure out if it'll hit the fender or such. I highly doubt unless you have a wide body a 45mm will work!

i got my stuff done at a reputable tire shop suggested by guys on here and plenty others, they said they did something along the lines of jacking something up and they measured the space between the tire side wall and fender and said 45 mm would be perfect and still give me room to play around without rubbing

everyones saying H&R spacers are really good

****...what are your wheel specs?

I mentioned the size but don't know the offset, there stern st2 rims 20 inch

we arent talking a 20 + a 20 + a 5 right?

daily use perfectly fine

drag strip use nah (ebay spacers will break)

That's not a good way to do it. You need your offset and give it to us. It's really easy then!

http://www.bloxsport.com/badspacers/...0spacers-4.jpg

http://forum.ih8mud.com/attachments/photo-jpg.561966/

Save your money
Buy better wheels

im still a newb in aspects related to cars and this was another costly mistake, like some have stated, and if i knew i would have just bought different rims that were flush with the fender. im either going to get H&R 20-25mm (the size most Z owners have gone with) or i might just leave it as is. live and learn.. :(

thanks for all the feedback guys

:iagree:

Sounds like you have learned your lesson. It happens even to the best of us sometimes. Good luck with your build and future mods :tiphat: