355/30/19

avery370z · 11-21-2015, 02:17 PM

Is anybody running this size tire?

Rusty · 11-21-2015, 08:40 PM

No one I know of.

There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check.

Go ahead and do it.

cjwsrt6 · 11-21-2015, 08:49 PM

http://www.tirerack.com/tires/tires....0ACR&tab=Sizes
I'd love to run those sizes but my opinion is just too much tire for a stock car

Rusty · 11-21-2015, 09:41 PM

Quote:

Originally Posted by cjwsrt6

http://www.tirerack.com/tires/tires....0ACR&tab=Sizes
I'd love to run those sizes but my opinion is just too much tire for a stock car

Those are the tires for the new Viper ARC.

cjwsrt6 · 11-21-2015, 10:03 PM

Quote:

Originally Posted by Rusty

Those are the tires for the new Viper ARC.

Correct, Ive autocrossed multiple sets of the kumho xs, probably 10 or so and loved the tire, ran it as a street tire on my crossfire as well. Im hoping the v720 tire gets some 19" sizes soon.
But when I upgrade to a z06 this is what ill run

Rusty · 11-21-2015, 10:11 PM

Quote:

Originally Posted by cjwsrt6

Correct, Ive autocrossed multiple sets of the kumho xs, probably 10 or so and loved the tire, ran it as a street tire on my crossfire as well. Im hoping the v720 tire gets some 19" sizes soon.
But when I upgrade to a z06 this is what ill run

I'm hoping they come out with 295/35-19 and a 345/30-19.

barncobob · 11-22-2015, 02:30 PM

I ran 305/30/19 on my 06 997 C4 and they were HUGE, too much tire for 350HP, but im not an engineer either.

avery370z · 11-22-2015, 10:44 PM

Quote:

Originally Posted by Rusty

No one I know of.

There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check.

Go ahead and do it.

Im looking at the P Zeros Rusty. Im running a 345/30/19 right now but looking put together a nicer wheel and tire combo. My plans are for a 12.5 rear wheel with 355's. I have no rubbing issues with my 345's lowered on HandR springs.

Rusty · 11-23-2015, 05:20 AM

Quote:

Originally Posted by avery370z

Im looking at the P Zeros Rusty. Im running a 345/30/19 right now but looking put together a nicer wheel and tire combo. My plans are for a 12.5 rear wheel with 355's. I have no rubbing issues with my 345's lowered on HandR springs.

That's good to hear that you have no issues being lower. Question, how much lower, and wheel specs are you with the 345's?

avery370z · 11-23-2015, 08:39 AM

Quote:

Originally Posted by Rusty

That's good to hear that you have no issues being lower. Question, how much lower, and wheel specs are you with the 345's?

19x12 et 28 in the rear with Nitto Invo tires. If i remember correctly my camber is at 1.5 . The H and R springs are an inch in the front and 1.5 in the rear.

Ghost116 · 11-23-2015, 09:53 AM

Gonna follow this to see how it turns out

looking at same wheel specs. Maybe not such a wide tire but more info is always good.

Rusty · 11-23-2015, 10:23 AM

Quote:

Originally Posted by avery370z

19x12 et 28 in the rear with Nitto Invo tires. If i remember correctly my camber is at 1.5 . The H and R springs are an inch in the front and 1.5 in the rear.

That's the same rim specs as I have. With the PSS's, I just make the fender edge. What specs you planning on with the 355's?

avery370z · 11-23-2015, 11:16 AM

Quote:

Originally Posted by Rusty

That's the same rim specs as I have. With the PSS's, I just make the fender edge. What specs you planning on with the 355's?

Im gonna try a 12.5 with a 33 or 34 et. Im going to push the 1/2 inch more on the inside. It should work gotta measure this weekend to be sure.

avery370z · 12-10-2015, 07:14 PM

Ordered wheels today,should only take 3 weeks. Im going with the PZeros Rusty hopefully it works fingers crossed.

Fyalinks · 12-23-2015, 04:32 AM

Quote:

Originally Posted by avery370z

Ordered wheels today,should only take 3 weeks. Im going with the PZeros Rusty hopefully it works fingers crossed.

If you check the link I posted at the bottom you will see that at least one Pirelli tire runs slimmer than one Michelin tire (don't know if that is the same for all the respective brands tires). Also, the Viper used to run 345 Michelins on the same wheel width (12 inch) before they switched to the 355 Pirelli tires, so I would assume that you will see minimal difference in tire width. If anything, the Michelin may still be a bit wider. You will confirm this of course, I am just speculating

Look here for tire width comparison

11-21-2015, 02:17 PM	#1 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	355/30/19 Is anybody running this size tire?

11-21-2015, 08:40 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,184 Drives: 2011 Nismo GM 6M Rep Power: 2684437	No one I know of. There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check. Go ahead and do it. JARblue likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-10-2015, 07:14 PM	#14 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 11	Ordered wheels today,should only take 3 weeks. Im going with the PZeros Rusty hopefully it works fingers crossed. Rusty likes this.

11-21-2015, 08:49 PM	#3 (permalink)
cjwsrt6 Enthusiast Member Join Date: Apr 2014 Location: Alabama Posts: 452 Drives: 2005 crossfire Srt6 Rep Power: 11	http://www.tirerack.com/tires/tires....0ACR&tab=Sizes I'd love to run those sizes but my opinion is just too much tire for a stock car

11-22-2015, 02:30 PM	#7 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	I ran 305/30/19 on my 06 997 C4 and they were HUGE, too much tire for 350HP, but im not an engineer either.

11-23-2015, 09:53 AM	#11 (permalink)
Ghost116 Base Member Join Date: Aug 2015 Location: Ontario Posts: 167 Drives: Up coming Rep Power: 367	Gonna follow this to see how it turns out looking at same wheel specs. Maybe not such a wide tire but more info is always good.