355/30/19

Rusty · 11-21-2015, 07:40 PM

No one I know of.

There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check.

Go ahead and do it.

avery370z · 11-22-2015, 09:44 PM

Quote:

Originally Posted by Rusty

No one I know of.

There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check.

Go ahead and do it.

Im looking at the P Zeros Rusty. Im running a 345/30/19 right now but looking put together a nicer wheel and tire combo. My plans are for a 12.5 rear wheel with 355's. I have no rubbing issues with my 345's lowered on HandR springs.

Rusty · 11-23-2015, 04:20 AM

Quote:

Originally Posted by avery370z

Im looking at the P Zeros Rusty. Im running a 345/30/19 right now but looking put together a nicer wheel and tire combo. My plans are for a 12.5 rear wheel with 355's. I have no rubbing issues with my 345's lowered on HandR springs.

That's good to hear that you have no issues being lower. Question, how much lower, and wheel specs are you with the 345's?

avery370z · 11-23-2015, 07:39 AM

Quote:

Originally Posted by Rusty

That's good to hear that you have no issues being lower. Question, how much lower, and wheel specs are you with the 345's?

19x12 et 28 in the rear with Nitto Invo tires. If i remember correctly my camber is at 1.5 . The H and R springs are an inch in the front and 1.5 in the rear.

Rusty · 11-23-2015, 09:23 AM

Quote:

Originally Posted by avery370z

19x12 et 28 in the rear with Nitto Invo tires. If i remember correctly my camber is at 1.5 . The H and R springs are an inch in the front and 1.5 in the rear.

That's the same rim specs as I have. With the PSS's, I just make the fender edge. What specs you planning on with the 355's?

avery370z · 11-23-2015, 10:16 AM

Quote:

Originally Posted by Rusty

That's the same rim specs as I have. With the PSS's, I just make the fender edge. What specs you planning on with the 355's?

Im gonna try a 12.5 with a 33 or 34 et. Im going to push the 1/2 inch more on the inside. It should work gotta measure this weekend to be sure.

avery370z · 12-10-2015, 06:14 PM

Ordered wheels today,should only take 3 weeks. Im going with the PZeros Rusty hopefully it works fingers crossed.

11-21-2015, 07:40 PM	#1 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,350 Drives: 2011 Nismo GM 6M Rep Power: 2684438	No one I know of. There is only about 3 tires in that size. Which one you interested in? They all take a 12.5" rim. My set-up. 345/30-19 on 19x12, +28, camber -1.75. I have about one inch clearance with the rear shock and sidewall. The tread is under the fender, but the sidewall sticks out a little. If I was running a true coilover in the rear. Think the spring may rub the tire on cornering. If not, it would be close. With a 355, it would be interesting. Think you would also have to run a 295~305 in the front to keep the understeer in check. Go ahead and do it. JARblue likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-10-2015, 06:14 PM	#7 (permalink)
avery370z Base Member Join Date: Mar 2014 Location: Fort Worth,Texas Posts: 153 Drives: 2014 370z w/ Sp Pkg Rep Power: 12	Ordered wheels today,should only take 3 weeks. Im going with the PZeros Rusty hopefully it works fingers crossed. Rusty likes this.