Bought some new wheels

LAVA · 09-18-2015, 05:10 PM

Can't wait to put them on the car
19x 9.5/10.5

Zbrah · 09-18-2015, 05:16 PM

Nice. Congrats!

Offsets?

LAVA · 09-18-2015, 05:18 PM

Thx, super excited! Offset is 22 f&r

Zbrah · 09-18-2015, 05:21 PM

That calls for a meaty set up! 325s on the rear perhaps?

LAVA · 09-18-2015, 06:43 PM

wow can I go that wide, that would be sweet

POS VETT · 09-18-2015, 11:43 PM

The rear fender wells can take major sizes. I wouldn't run 325 on a 10.5" wide wheel, but I currently have 325 on 11.5" which fit "loosely" in the rear. Judging from the available space, a 12-13" wide wheel would fit nice and "snug" carrying a 335 to 345-mm wide tire.

jchammond · 09-19-2015, 01:54 AM

Nice Wheels LAVA!
Do you wish to keep stock diameter tire's or slightly shorter-due to lowered car.
Pending on Mfg. 265/35's & 305/30's are a good fit @ 26.3" diameter
oem diameter fat tires would be 275/35 & 325/30's.....325's on a 10.5 wheel is do-able with right tire selection.
Again nice wheels!

FairladyZ10PG · 09-19-2015, 02:42 AM

Now get them mounted please

sunkist350z · 09-19-2015, 03:32 AM

Nice wheels post pics!

jchammond · 09-19-2015, 05:03 AM

Yep-ready to see,,, I been looking at the Trans.Red Forgeline wheels; but I currently have beer money to go with my champagne taste! LolImageUploadedByTapatalk1442653373.783451.jpg ImageUploadedByTapatalk1442653395.163695.jpg
Photoshopped

Sent from my iPhone using Tapatalk

LAVA · 09-19-2015, 10:34 AM

Quote:

Originally Posted by POS VETT

The rear fender wells can take major sizes. I wouldn't run 325 on a 10.5" wide wheel, but I currently have 325 on 11.5" which fit "loosely" in the rear. Judging from the available space, a 12-13" wide wheel would fit nice and "snug" carrying a 335 to 345-mm wide tire.

Thx for the info

Quote:

Originally Posted by jchammond

Nice Wheels LAVA!
Do you wish to keep stock diameter tire's or slightly shorter-due to lowered car.
Pending on Mfg. 265/35's & 305/30's are a good fit @ 26.3" diameter
oem diameter fat tires would be 275/35 & 325/30's.....325's on a 10.5 wheel is do-able with right tire selection.
Again nice wheels!

I'm not sure yet, I'm kind of leaning towards a 35-40 sidewall for a couple reasons. 1. the only real reason I lowered the car was to bring the wheel gap into check, 2. I'm not super worried about better handling because there are on 3 corners within 108 miles of where I live. I'm open to advice on size options, so if anyone has any please share it. I do want very wide tires in back.

Quote:

Originally Posted by FairladyZ10PG

Now get them mounted please

I know I wish there were on yesterday

Quote:

Originally Posted by sunkist350z

Nice wheels post pics!

Unfortunately they won't be on until the spring because I'm putting the car up in a month for winter and I'm out of $$$.

Quote:

Originally Posted by jchammond

Yep-ready to see,,, I been looking at the Trans.Red Forgeline wheels; but I currently have beer money to go with my champagne taste! LolAttachment 107854 Attachment 107855
Photoshopped

Those are cool!

jchammond · 09-20-2015, 03:41 AM

You pretty much have limited yourself with the +22 9.9" fronts,,,not going to go hardly over a 27" tire & a 40 series tire would probably be too narrow in your book.
Depending on the manufacturer-i'm pretty sure the Hankook V12 evo2 (or what ever it's called)-would probably about max out the front in height,with diameter of 26.9" 285/35/19.
It's an XL tire with 10/32" tread,29lbs.,9.5-11"wheel width recom,showed 11.3"section &
9.8"tread on a 10" diameter wheel....that would be closer to an 11" section & 9.8" tread on your front wheels...26.9" tall (i've seen them on a lowered car-they fit) should not hit turning lock to lock,,,that about maxes out the front on a height perspective.
Rear's or open game...just what ever you want to squeeze on there...plenty of room-specs are nearly exactly that of the Nismo rear wheels.
Hankook's run a tad narrower than other's & the closest rear fitment within specs of your wheel width,is the 325/30,,,10/32" tread,32lbs.,measured 13" section & 11.5" tread on a 11" wheel...that would be about 12.7" section & 11.5" tread on yours (full fitment) at 26.7" diameter.
All that being said put's the front .2" taller than rear...the fix is to run 275/35's on front at 26.6".
these diameter's are about closest to factory as you can get-pending you want fatter tires.
i pm'd you pic's of 265/35 & 305/30's on the same size wheels as your's.
be sure and post pics of what you get.
Have A Great Sunday!

LAVA · 09-20-2015, 09:34 AM

wow thx, your like a personal tire consultant. I'm not against going with a 30 sidewall, and the wider the better in the back. I mentioned in the pm that the wheels are wider than the specs they gave me. I'm going to measure them again today

LAVA · 09-20-2015, 11:01 AM

Wheels measure 10 3/8 wide front and 11.5 wide rear

kenchan · 09-20-2015, 11:09 AM

before you mount tires, definitely check the front brake caliper clearance. those wheels are deep, might hit the caliper.

u'll probably want 5-10mm spacers on the rear.

09-18-2015, 05:10 PM	#1 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 80	Bought some new wheels Can't wait to put them on the car 19x 9.5/10.5 David Parra and jchammond like this. __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET Last edited by LAVA; 09-19-2015 at 12:48 PM.

09-18-2015, 05:16 PM	#2 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	Nice. Congrats! Offsets? __________________

09-18-2015, 05:18 PM	#3 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 80	Thx, super excited! Offset is 22 f&r __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET

09-18-2015, 05:21 PM	#4 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	That calls for a meaty set up! 325s on the rear perhaps? LAVA likes this. __________________

09-18-2015, 06:43 PM	#5 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 80	wow can I go that wide, that would be sweet __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET

09-18-2015, 11:43 PM	#6 (permalink)
POS VETT Track Member Join Date: Apr 2015 Location: Columbus OH Posts: 612 Drives: Z34\|C4LT4\|C6Z06\|V25 Rep Power: 3366	The rear fender wells can take major sizes. I wouldn't run 325 on a 10.5" wide wheel, but I currently have 325 on 11.5" which fit "loosely" in the rear. Judging from the available space, a 12-13" wide wheel would fit nice and "snug" carrying a 335 to 345-mm wide tire. DRFTR likes this.

09-19-2015, 01:54 AM	#7 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Nice Wheels LAVA! Do you wish to keep stock diameter tire's or slightly shorter-due to lowered car. Pending on Mfg. 265/35's & 305/30's are a good fit @ 26.3" diameter oem diameter fat tires would be 275/35 & 325/30's.....325's on a 10.5 wheel is do-able with right tire selection. Again nice wheels! __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

09-19-2015, 02:42 AM	#8 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 255	Now get them mounted please __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

09-19-2015, 03:32 AM	#9 (permalink)
sunkist350z A True Z Fanatic Join Date: Feb 2009 Location: Z-land Posts: 1,009 Drives: 2012 370z sport 6-sp Rep Power: 55341	Nice wheels post pics!

09-19-2015, 05:03 AM	#10 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Yep-ready to see,,, I been looking at the Trans.Red Forgeline wheels; but I currently have beer money to go with my champagne taste! LolImageUploadedByTapatalk1442653373.783451.jpg ImageUploadedByTapatalk1442653395.163695.jpg Photoshopped Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

09-20-2015, 03:41 AM	#12 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	You pretty much have limited yourself with the +22 9.9" fronts,,,not going to go hardly over a 27" tire & a 40 series tire would probably be too narrow in your book. Depending on the manufacturer-i'm pretty sure the Hankook V12 evo2 (or what ever it's called)-would probably about max out the front in height,with diameter of 26.9" 285/35/19. It's an XL tire with 10/32" tread,29lbs.,9.5-11"wheel width recom,showed 11.3"section & 9.8"tread on a 10" diameter wheel....that would be closer to an 11" section & 9.8" tread on your front wheels...26.9" tall (i've seen them on a lowered car-they fit) should not hit turning lock to lock,,,that about maxes out the front on a height perspective. Rear's or open game...just what ever you want to squeeze on there...plenty of room-specs are nearly exactly that of the Nismo rear wheels. Hankook's run a tad narrower than other's & the closest rear fitment within specs of your wheel width,is the 325/30,,,10/32" tread,32lbs.,measured 13" section & 11.5" tread on a 11" wheel...that would be about 12.7" section & 11.5" tread on yours (full fitment) at 26.7" diameter. All that being said put's the front .2" taller than rear...the fix is to run 275/35's on front at 26.6". these diameter's are about closest to factory as you can get-pending you want fatter tires. i pm'd you pic's of 265/35 & 305/30's on the same size wheels as your's. be sure and post pics of what you get. Have A Great Sunday! Memphis370Z and AntiVenom like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

09-20-2015, 09:34 AM	#13 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 80	wow thx, your like a personal tire consultant. I'm not against going with a 30 sidewall, and the wider the better in the back. I mentioned in the pm that the wheels are wider than the specs they gave me. I'm going to measure them again today __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET

09-20-2015, 11:01 AM	#14 (permalink)
LAVA Track Member Join Date: Nov 2014 Location: Ohio Posts: 775 Drives: AWD Q50S_3.7 Rep Power: 80	Wheels measure 10 3/8 wide front and 11.5 wide rear __________________ BORLA / BERK / R2C / Z1 / Swift / NST / MOTORDYNE / OMP / H&R / EVO-R / AEROJACKET

09-20-2015, 11:09 AM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	before you mount tires, definitely check the front brake caliper clearance. those wheels are deep, might hit the caliper. u'll probably want 5-10mm spacers on the rear.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] i bought a 370z 40th anniversary want to convert into nismo look bumpers wheels	dima370z	Parts for sale (Private Classifieds)	5	12-14-2013 11:01 PM
Bought it as-is	Count Maddox	Exterior & Interior	28	09-09-2013 08:20 PM
New here and just bought my first Z!	Panda Grahams	Nissan 370Z General Discussions	13	06-27-2011 06:23 PM
Just bought my new Z	austen0316	New 370Z Owner	6	06-13-2010 08:12 PM
just bought a 370	510z	New 370Z Owner	2	03-20-2009 04:38 PM