Flush fit deep concave options
 

I'm thinking about new wheels. I know just about nothing when it comes to wheels, the brands, forged vs cast, offset... From what I've seen, I like the deep concave look with a simple design, 5-7 spokes. Wheels like Vossen CV3 or CV5, Avant Garde M550, Stance SC6.

I'd like to stay at 19". Looks like 20" tires are more $ and with 20s, you loose 1/2" of sidewall, which makes me think the ride would be harsher. I also think the profile of 19s look better then 20s.

I'm doing this purely for looks, won't be tracking the car. I'm not looking to save weight or gain anything performance wise. I don't want to spend $$$, but not looking to pick up an $800 set of no name wheels of Ebay. More in the $1500-2000 range or a used set with good tires for $1500.

I'm leaning toward the AG M550 because they are offered in 19x9.5 and 19x11 with the right offset and get your wheels has them for ~$2400 with tires.

I like the CV3s with machined face, but 19s are only offered 19x8.5 and 19x10. Would these sit as flush as the M550 without using spacers?

What 19" wheels are out there in this style that will sit pretty flush without needing spacers? I am dropped on coils about 1" front and back with 20mm spacer in front and 25mm in the rear now. I'd like to ditch the spacers when I change wheels and keep the same look.


Avant Garde M550

Well i have 20" Vossen CV1(20x9,20x10.5) and the car sit pretty damn flush and they don't need any spacers. I know you'll asking about 19" but is just to give u an idea.

I also have the 20x9 20x10.5 setup and I think it sits great and rides fine too. I went with the Vossen CVT's. I was originally looking at CV3 and I heard that they are actually discontinuing those.

TSW has some new models that look really good, Rohana's look good, and Concept One has some good stuff too. Get what you like best but the CV3's look much better than the 5 spoke cast AG's in my opinion but with that said, it's super played out. In my opinion, you can look good on a set of wheels that aren't as widely used but that may not matter to you; it's your car after all!

You like these?

It's hard to tell the concave from that pic but if you want I'll send you another one just let me know. The concave on these is serious

The TSW Bathurst is a new release that in my opinion looks really damn good. Is their first rotary forged concave wheel and is not as expensive as other forged wheel brands.

http://www.modbargains.com/images/Pr...-g37%20(1).JPG

Forgestar CF5. Not sure how concave they get though.

I bought Work Emotion CR Ultimate in F:19x9.5 +25 R:19x10.5 +22. They sit flush and are concaved. The rear is deep concaved. I got them within your price range from B2autodesign. He was pretty helpful.

https://wheelwell.s3.amazonaws.com/f...BuDuWR9TNxA%3D

https://wheelwell.s3.amazonaws.com/3...cv9A%2FcPc8%3D

https://wheelwell.s3.amazonaws.com/a...wcFSzadkims%3D

They look better in person than in the pictures, Im not much of a photographer.

19x9.5 +20 front
19x11+17 rear

I think you should go more aggressive if you want it to be more flush than the pic below.

http://www.the370z.com/members/mag_b...n-speedway.jpg

check out BC wheels and LAB forged wheels, insane concave wheels. not cheap, starting at 5k+ a set.

I prefer 5-7 wider spokes. Closest to that style that I'm considering is the Forgestar F14.

I like the fit of those, but not exactly the wheel style I'm looking for.

The front looks good, but a little more in the back.

Look into the rohana wheels