Flush fit deep concave options

Silly Rabbit · 06-03-2015, 09:48 AM

I'm thinking about new wheels. I know just about nothing when it comes to wheels, the brands, forged vs cast, offset... From what I've seen, I like the deep concave look with a simple design, 5-7 spokes. Wheels like Vossen CV3 or CV5, Avant Garde M550, Stance SC6.

I'd like to stay at 19". Looks like 20" tires are more $ and with 20s, you loose 1/2" of sidewall, which makes me think the ride would be harsher. I also think the profile of 19s look better then 20s.

I'm doing this purely for looks, won't be tracking the car. I'm not looking to save weight or gain anything performance wise. I don't want to spend $$$, but not looking to pick up an $800 set of no name wheels of Ebay. More in the $1500-2000 range or a used set with good tires for $1500.

I'm leaning toward the AG M550 because they are offered in 19x9.5 and 19x11 with the right offset and get your wheels has them for ~$2400 with tires.

I like the CV3s with machined face, but 19s are only offered 19x8.5 and 19x10. Would these sit as flush as the M550 without using spacers?

What 19" wheels are out there in this style that will sit pretty flush without needing spacers? I am dropped on coils about 1" front and back with 20mm spacer in front and 25mm in the rear now. I'd like to ditch the spacers when I change wheels and keep the same look.

Vossen CV3

Avant Garde M550

VSS370z · 06-03-2015, 12:03 PM

Well i have 20" Vossen CV1(20x9,20x10.5) and the car sit pretty damn flush and they don't need any spacers. I know you'll asking about 19" but is just to give u an idea.

kidicenj · 06-03-2015, 01:48 PM

I also have the 20x9 20x10.5 setup and I think it sits great and rides fine too. I went with the Vossen CVT's. I was originally looking at CV3 and I heard that they are actually discontinuing those.

moore.speed · 06-03-2015, 02:43 PM

TSW has some new models that look really good, Rohana's look good, and Concept One has some good stuff too. Get what you like best but the CV3's look much better than the 5 spoke cast AG's in my opinion but with that said, it's super played out. In my opinion, you can look good on a set of wheels that aren't as widely used but that may not matter to you; it's your car after all!

nomodsjk · 06-03-2015, 09:36 PM

You like these?

nomodsjk · 06-03-2015, 09:37 PM

It's hard to tell the concave from that pic but if you want I'll send you another one just let me know. The concave on these is serious

VSS370z · 06-03-2015, 09:51 PM

The TSW Bathurst is a new release that in my opinion looks really damn good. Is their first rotary forged concave wheel and is not as expensive as other forged wheel brands.

Brendan · 06-03-2015, 10:20 PM

Forgestar CF5. Not sure how concave they get though.

Ryguy · 06-03-2015, 11:26 PM

I bought Work Emotion CR Ultimate in F:19x9.5 +25 R:19x10.5 +22. They sit flush and are concaved. The rear is deep concaved. I got them within your price range from B2autodesign. He was pretty helpful.

They look better in person than in the pictures, Im not much of a photographer.

mag_black · 06-03-2015, 11:35 PM

19x9.5 +20 front
19x11+17 rear

I think you should go more aggressive if you want it to be more flush than the pic below.

CC QUIK · 06-04-2015, 01:47 AM

check out BC wheels and LAB forged wheels, insane concave wheels. not cheap, starting at 5k+ a set.

Silly Rabbit · 06-04-2015, 11:49 AM

Quote:

Originally Posted by nomodsjk

You like these?

I prefer 5-7 wider spokes. Closest to that style that I'm considering is the Forgestar F14.

Silly Rabbit · 06-04-2015, 11:50 AM

Quote:

Originally Posted by mag_black

19x9.5 +20 front
19x11+17 rear

I think you should go more aggressive if you want it to be more flush than the pic below.

I like the fit of those, but not exactly the wheel style I'm looking for.

Silly Rabbit · 06-04-2015, 11:53 AM

Quote:

Originally Posted by Ryguy

I bought Work Emotion CR Ultimate in F:19x9.5 +25 R:19x10.5 +22. They sit flush and are concaved. The rear is deep concaved. I got them within your price range from B2autodesign. He was pretty helpful.

They look better in person than in the pictures, Im not much of a photographer.

The front looks good, but a little more in the back.

xxZxx · 06-05-2015, 12:36 AM

Look into the rohana wheels

06-03-2015, 09:48 AM	#1 (permalink)
Silly Rabbit Track Member Join Date: Sep 2013 Location: Brookston, IN Age: 54 Posts: 683 Drives: '12 PW Touring Sport Rep Power: 619	Flush fit deep concave options I'm thinking about new wheels. I know just about nothing when it comes to wheels, the brands, forged vs cast, offset... From what I've seen, I like the deep concave look with a simple design, 5-7 spokes. Wheels like Vossen CV3 or CV5, Avant Garde M550, Stance SC6. I'd like to stay at 19". Looks like 20" tires are more $ and with 20s, you loose 1/2" of sidewall, which makes me think the ride would be harsher. I also think the profile of 19s look better then 20s. I'm doing this purely for looks, won't be tracking the car. I'm not looking to save weight or gain anything performance wise. I don't want to spend $$$, but not looking to pick up an $800 set of no name wheels of Ebay. More in the $1500-2000 range or a used set with good tires for $1500. I'm leaning toward the AG M550 because they are offered in 19x9.5 and 19x11 with the right offset and get your wheels has them for ~$2400 with tires. I like the CV3s with machined face, but 19s are only offered 19x8.5 and 19x10. Would these sit as flush as the M550 without using spacers? What 19" wheels are out there in this style that will sit pretty flush without needing spacers? I am dropped on coils about 1" front and back with 20mm spacer in front and 25mm in the rear now. I'd like to ditch the spacers when I change wheels and keep the same look. Vossen CV3 Avant Garde M550 __________________ NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter

06-03-2015, 01:48 PM	#3 (permalink)
kidicenj Base Member Join Date: Jul 2013 Location: New Jersey Posts: 141 Drives: 12 Nissan 370z Rep Power: 12	I also have the 20x9 20x10.5 setup and I think it sits great and rides fine too. I went with the Vossen CVT's. I was originally looking at CV3 and I heard that they are actually discontinuing those. __________________ Shine Auto Amuse - Carbon Signal - FI CF CB Exhaust Non res - FI HFC - Stillen G3 - UPREV Tune - 20' Vossen CVT - Project Kic R40 - 255/35 285/30 - 15% tints

06-03-2015, 02:43 PM	#4 (permalink)
moore.speed Base Member Join Date: Feb 2015 Location: Northwest Arkansas Posts: 181 Drives: 09 370Z Touring 6MT Rep Power: 10	TSW has some new models that look really good, Rohana's look good, and Concept One has some good stuff too. Get what you like best but the CV3's look much better than the 5 spoke cast AG's in my opinion but with that said, it's super played out. In my opinion, you can look good on a set of wheels that aren't as widely used but that may not matter to you; it's your car after all! __________________ "Let me tell you something. Anyone who owns a car like this (370Z) has something wrong with them in the head." My Grandpa who has owned 4 Z's in his day.

06-03-2015, 11:26 PM	#9 (permalink)
Ryguy Base Member Join Date: Feb 2013 Location: Oak Harbor, WA Posts: 186 Drives: 11 Nissan 370z white Rep Power: 12	I bought Work Emotion CR Ultimate in F:19x9.5 +25 R:19x10.5 +22. They sit flush and are concaved. The rear is deep concaved. I got them within your price range from B2autodesign. He was pretty helpful. They look better in person than in the pictures, Im not much of a photographer. __________________ 11 PW base 370z w/ Z1 25 row oil cooler, K&N typhoon short ram intake, Megan racing drift spec catback, Z1 CSC Elimination kit, Work Emotion CR Ultimate, akebono sport calipers, DBA rotors

06-03-2015, 11:35 PM	#10 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	19x9.5 +20 front 19x11+17 rear I think you should go more aggressive if you want it to be more flush than the pic below. SilverValk01 likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

06-03-2015, 12:03 PM	#2 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	Well i have 20" Vossen CV1(20x9,20x10.5) and the car sit pretty damn flush and they don't need any spacers. I know you'll asking about 19" but is just to give u an idea.

06-03-2015, 09:37 PM	#6 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	It's hard to tell the concave from that pic but if you want I'll send you another one just let me know. The concave on these is serious

06-03-2015, 09:51 PM	#7 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 13	The TSW Bathurst is a new release that in my opinion looks really damn good. Is their first rotary forged concave wheel and is not as expensive as other forged wheel brands.

06-03-2015, 10:20 PM	#8 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 641 Drives: Poor man's Porsche Rep Power: 542	Forgestar CF5. Not sure how concave they get though.

06-04-2015, 01:47 AM	#11 (permalink)
CC QUIK Base Member Join Date: Sep 2012 Location: Vegas Posts: 83 Drives: 2012 370Z Rep Power: 13	check out BC wheels and LAB forged wheels, insane concave wheels. not cheap, starting at 5k+ a set.

06-05-2015, 12:36 AM	#15 (permalink)
xxZxx Enthusiast Member Join Date: Jan 2015 Location: Houston Texas Posts: 277 Drives: 09 Nissan 370z Rep Power: 10	Look into the rohana wheels

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forgestar New F14 Super Deep Concave	GetYourWheels	Tires/Wheels	1367	03-18-2021 11:43 AM
370Z Special! Forgestar F14 Deep & Super Deep Concave- NO WAIT TIME!	GetYourWheels	Tires/Wheels	95	03-17-2017 01:47 PM
[WTB] Deep Concave and Super Deep Concave Forgestar 14's	wulfgvng	Parts for sale (Private Classifieds)	0	02-23-2015 11:09 PM
GetYourWheels: Stance SC-6IX DEEP Concave	GetYourWheels	Tires/Wheels	9	06-21-2013 12:48 PM
...Hella Flush.... G37 on Vossen VVS-CV1 (DEEP CONCAVE) 20 images!!	jav@vossen	Other Vehicles	11	02-09-2011 12:25 PM