20" Track Wheels? GTR Sizing DPE Forged Monoblock Test Fit

03Z33

Had a chance to test fit some newly released DPE monoblock wheels tonight before they shipped out to a GTR owner, didn't get too many great pics but here they are anyway in case anyone wants to check them out.

Wheels and tires are spec'd for a 2009 Nissan GTR so specs might be a bit off from standard 370Z fittment but they seem to be really close to what I'd run if I was wanting a set of 20" track wheels.

20x10.5 front w/Toyo 888 285/35/20
20x11.0 rear w/Toyo 888 315/30/20

Front looks like it could go out another 5-10mm if car was lowered with a bit of negative camber. As it sits now there is no rubbing but inner clearance to the suspension arm/spindle is close.

Rear can go wider as well since there's still 1.5" clearance to the nearest suspension parts on the inside (traction rod & shock body). Outside is a good fit but could come out another 5-10mm if car was lowered with negative camber, especially if running a slightly narrower tire.

Could really use some larger brakes under these huge wheels, anyone make some 16" rotors?

Wheels are DPE Monoblock MT-20 which uses the new concave forging, these were done in a custom gold/bronze color which is very nice in person.

DPE Wheels

Attached Images

	get-attachment-25.aspx.jpeg (57.4 KB, 218 views)
	get-attachment-24.aspx.jpeg (60.1 KB, 122 views)
	get-attachment-21.aspx.jpeg (50.1 KB, 131 views)
	get-attachment-29.aspx.jpeg (45.6 KB, 113 views)
	get-attachment-32.aspx.jpeg (30.4 KB, 46 views)
	get-attachment-35.aspx.jpeg (48.8 KB, 102 views)
	get-attachment-31.aspx.jpeg (46.7 KB, 43 views)
	get-attachment.aspx.jpeg (90.3 KB, 158 views)
	Picture 016.jpg (23.8 KB, 34 views)
	get-attachment-18.aspx.jpeg (45.6 KB, 63 views)
	get-attachment-16.aspx.jpeg (78.2 KB, 187 views)
	get-attachment-11.aspx.jpeg (82.6 KB, 59 views)
	get-attachment-27.aspx.jpeg (51.7 KB, 33 views)
	get-attachment-28.aspx.jpeg (55.7 KB, 30 views)