Anyone have these specs?

synolimit · 05-21-2015, 05:18 AM

Quote:

Originally Posted by BadChachi

That's my problem. for those size wheels I don't know an offset that will give a simple z flush. As far as the tires, that I will take into consideration. The fitment struggle is real..

It depends how low you are and camber too, we need all the facts. My rear was 10.5 +15 and sucked in. Flush would be +5 probably. I'm -5 now and stick out a little, even at -1.7 camber. Front to be flush on a 10.5 I'd guess +25 to +35. im 10.5 +15 and it sticks out some at -2.9.

BadChachi · 05-21-2015, 05:28 AM

Quote:

Originally Posted by Scott@Synergy

It depends how low you are and camber too, we need all the facts. My rear was 10.5 +15 and sucked in. Flush would be +5 probably. I'm -5 now and stick out a little even at -1.7 camber. Front to be flush on a 10.5 I'd guess +25 to +35. im 10.5 +15 and it sticks out some at -2.9.

So my goal is 19x10.5 +15 offset all around with 20mm spacers in rear. I don't want to camber. Would I have too? I pretty much want no wheel gap, no camber

In this picthis guys is running 20x10.5 +15 offset all around. I want the same ride height as he does but with more tire hence 19" but I'm trying to avoid the negative camber area. I want to ride staggered but if I can't without sacrificing having the same sized wheels all around then I might just have to suck it up

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What might be the specs to this car	Good_Tymes	Exterior & Interior	6	04-04-2013 07:15 PM
My Alignment specs - Please Help	FlawlessZ	Brakes & Suspension	39	01-04-2013 10:35 AM
Specs of the 3.7L VQ37VHR	admin	Engine & Drivetrain	17	11-12-2012 04:18 PM
Torque Specs	scionide	Brakes & Suspension	1	01-24-2012 12:54 PM