Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Western Region (http://www.the370z.com/western-region/)
-   -   First Arizona Thread.... (http://www.the370z.com/western-region/226-first-arizona-thread.html)

cc370z 07-21-2012 08:32 PM

Quote:

Originally Posted by NickTurnon (Post 1829747)
Im from OC, so I know of shops in CA. But I didn't know if there was anyone out here. Those drives to california really rack up miles for me haha--

I already drive too much. Trying to limit that

I deal with vivid for almost everything. They are great. But I don't think they have a tuner right now. If it was me I would call them and see who they use for some of their customer setups.

hoodust 07-24-2012 01:59 PM

Hey Phoenix area 370z homies... just put on some BC BR's out of town but I'm WAY too low in the rear and don't have the tools to adjust. I'd gladly throw down a little cash and/or beer if someone could take 30 minutes to help me out. Or anyone know a decent place (north valley, desert ridge area) that won't charge my nuts off? :nutswinger: Best quote so far is $100/hr for 1-2 hours! Thanks brothers!

XwChriswX 07-26-2012 01:17 AM

Quote:

Originally Posted by hoodust (Post 1835495)
Hey Phoenix area 370z homies... just put on some BC BR's out of town but I'm WAY too low in the rear and don't have the tools to adjust. I'd gladly throw down a little cash and/or beer if someone could take 30 minutes to help me out. Or anyone know a decent place (north valley, desert ridge area) that won't charge my nuts off? :nutswinger: Best quote so far is $100/hr for 1-2 hours! Thanks brothers!

Don't really know any shops in the North Valley, but in Chandler you've got Vivid, that would be your best bet. CZP is in Central phoenix, but I'm not sure if they do Coil install/alignments...

TommyL 08-01-2012 06:24 PM

hello! i just got to chandler few days ago! im drivng a 2010 nismo 370z.. looking forward to see you guys.

hoodust 08-01-2012 06:50 PM

Quote:

Originally Posted by XwChriswX (Post 1838565)
Don't really know any shops in the North Valley, but in Chandler you've got Vivid, that would be your best bet. CZP is in Central phoenix, but I'm not sure if they do Coil install/alignments...

Thanks Chrisw... I actually saved some scratch by managing to set my ride height in back. Car handles squirrely over 80, and thanks to a thread on the forum I know it's because I only replaced the rear tires (Conti DWS, which have a WAY higher treadwear than stock). Other than that I am loving my new BC coilovers!

hoodust 08-01-2012 06:55 PM

Quote:

Originally Posted by TommyL (Post 1849882)
hello! i just got to chandler few days ago! im drivng a 2010 nismo 370z.. looking forward to see you guys.

Welcome! I'm north valley (near desert ridge) but I wave at all Z's :tiphat:

Speaking of, when are you north guys getting together again? I keep missing the Blue Agave meets...

XwChriswX 08-02-2012 02:25 PM

Quote:

Originally Posted by hoodust (Post 1849941)
Thanks Chrisw... I actually saved some scratch by managing to set my ride height in back. Car handles squirrely over 80, and thanks to a thread on the forum I know it's because I only replaced the rear tires (Conti DWS, which have a WAY higher treadwear than stock). Other than that I am loving my new BC coilovers!

Did you get a camber arm set installed too with your coils? The stock arms aren't able to adjust for lowering adequately.

Also, be careful with the BC's, there is a thread or two around here about some negative qualities of them, so just might wanna peek through to be safe. :tiphat:

vividracing 08-02-2012 02:44 PM

Quote:

Originally Posted by hoodust (Post 1849950)
Welcome! I'm north valley (near desert ridge) but I wave at all Z's :tiphat:

Speaking of, when are you north guys getting together again? I keep missing the Blue Agave meets...

whats the deal with these Blue Agave Meets? Might have to roll out for one.

XwChriswX 08-02-2012 02:45 PM

Quote:

Originally Posted by vividracing (Post 1851196)
whats the deal with these Blue Agave Meets? Might have to roll out for one.

If they're in reference to what I think they are, there was never a 'meet' there lol And there isn't as far as I know of cause all the ones that would attend have left there.

hoodust 08-02-2012 03:00 PM

Quote:

Originally Posted by XwChriswX (Post 1851168)
Did you get a camber arm set installed too with your coils? The stock arms aren't able to adjust for lowering adequately.

Also, be careful with the BC's, there is a thread or two around here about some negative qualities of them, so just might wanna peek through to be safe. :tiphat:


I got the SPC rear camber kit. They work, but to fix the toe network alignment had to give me around -2 degrees of camber... :( If that's what you mean by negative qualities, lol. We'll see how fast THAT eats my new tires. I actually got the BC's because a lot of folks recommended them on some threads here.

Let me know if you come across the negative thread.

hoodust 08-02-2012 03:03 PM

Quote:

Originally Posted by XwChriswX (Post 1851202)
If they're in reference to what I think they are, there was never a 'meet' there lol And there isn't as far as I know of cause all the ones that would attend have left there.


We'll that WAS a long time ago that folks here were talking about meeting there... Admittedly I haven't been active on the forums for some time. I think Frost is mad ^_^

XwChriswX 08-02-2012 03:17 PM

Quote:

Originally Posted by hoodust (Post 1851236)
I got the SPC rear camber kit. They work, but to fix the toe network alignment had to give me around -2 degrees of camber... :( If that's what you mean by negative qualities, lol. We'll see how fast THAT eats my new tires. I actually got the BC's because a lot of folks recommended them on some threads here.

Let me know if you come across the negative thread.

LoL Ok good, you got a camber kit. :tup: Don't want you wearing out your tires before you're supposed to. :icon17:

Quote:

Originally Posted by hoodust (Post 1851239)
We'll that WAS a long time ago that folks here were talking about meeting there... Admittedly I haven't been active on the forums for some time. I think Frost is mad ^_^

You have no idea... :bowrofl:

hoodust 08-02-2012 04:49 PM

Quote:

Originally Posted by XwChriswX (Post 1851266)
LoL Ok good, you got a camber kit. :tup: Don't want you wearing out your tires before you're supposed to. :icon17:

Yeah, my rears were already bald on the inside but in the 180 miles until i could get new tires and an alignment the steel belting was showing and there was finely ground tire covering my bumper!

You have no idea... :bowrofl:

Lol, nice one. Shh, apparently he's a mod now so he might be listening >_<

XwChriswX 08-02-2012 06:20 PM

Quote:

Originally Posted by hoodust (Post 1851351)
Lol, nice one. Shh, apparently he's a mod now so he might be listening >_<

Lol I Know he's listening. And he knows I'm speaking the truth... :stirthepot:

conor1123 08-11-2012 09:52 PM

Just saw a white 370z around chandler. Looked like an amuse body kit from the front + gtr looking fender scoops. WHERE YOU AT ?:eek:


All times are GMT -5. The time now is 03:32 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2