Launch Control/2-Step Problems

BOLIO 671 · 11-18-2014, 05:07 AM

Spoke to my tuner and did an internet search and could not find any remedies....So hopefully someone on the forum can help me out.....

I took the Z to the drag strip about 2 weeks ago. First time I ran her down the 1/4 mile with the Uprev Tune. I watched the Map Switching Vid on youtube and figured I practice a bit while I had some seat time at the track.

Here is the vid I was sent by my tuner.

Here's my problem. While prestaging at the light I already have the 2 Step/Launch Control map on while holding dwn the Cruise Control Button to switch into my Performance Map. While Prestaging I floor the gas while the 2 Step/Launch Control engages. Once the tree turns green I release the clutch and the cruise control button at the same time as illustrated in the Youtube vid. Everything works great...she gets off the line through 1st and 2nd gear all the way to redline, but once I get her into 3rd gear she suddenly goes into limp mode. I will be flooring the gas but its as though fuel is being cut off for the car to go into safe mode.

The funny thing is when I disabled the Launch Control and just launched off of my performance map by doing the old fashioned feathering of the gas and clutch the Z works fine and shifts throughout the gears without problems. I'm wondering whether anyone else has experience this problem with switching maps using the launch control and what are some of the remedies to this problem

Awgd8 · 11-18-2014, 09:44 PM

Quote:

Originally Posted by BOLIO 671

Spoke to my tuner and did an internet search and could not find any remedies....So hopefully someone on the forum can help me out.....

I took the Z to the drag strip about 2 weeks ago. First time I ran her down the 1/4 mile with the Uprev Tune. I watched the Map Switching Vid on youtube and figured I practice a bit while I had some seat time at the track.

Here is the vid I was sent by my tuner.

Here's my problem. While prestaging at the light I already have the 2 Step/Launch Control map on while holding dwn the Cruise Control Button to switch into my Performance Map. While Prestaging I floor the gas while the 2 Step/Launch Control engages. Once the tree turns green I release the clutch and the cruise control button at the same time as illustrated in the Youtube vid. Everything works great...she gets off the line through 1st and 2nd gear all the way to redline, but once I get her into 3rd gear she suddenly goes into limp mode. I will be flooring the gas but its as though fuel is being cut off for the car to go into safe mode.

The funny thing is when I disabled the Launch Control and just launched off of my performance map by doing the old fashioned feathering of the gas and clutch the Z works fine and shifts throughout the gears without problems. I'm wondering whether anyone else has experience this problem with switching maps using the launch control and what are some of the remedies to this problem

Do you have the .Osiris tune file? If it is not password protected I would like to take a look at the file. If not, only your tuner can fix it.

BOLIO 671 · 11-24-2014, 06:39 AM

Yes I have the file..you will be able to take a look at it as long as u have the Uprev ROM editor program.....I have the Tuner model so making adjustments should be simple...PM me ur email and I will send u the ROM file/Tune.

visconti · 12-10-2014, 01:19 AM

I don't think UpRev has launch control.

mastuning · 12-10-2014, 08:51 AM

^with multiple maps, one can stage with modified say MAP 2 and toggle to MAP 1 when ready.

its a split second.

jwick · 12-10-2014, 10:00 AM

Quote:

Originally Posted by mastuning

^with multiple maps, one can stage with modified say MAP 2 and toggle to MAP 1 when ready.

its a split second.

Yup. That's basically how my turbo anit-lag map works. Switch to anti-lag map, spool up turbo (that map is RPM limited), action map switching to normal map, when it's go time release the cruse toggle and away you go.

visconti · 12-10-2014, 11:57 AM

Quote:

Originally Posted by jwick

Yup. That's basically how my turbo anit-lag map works. Switch to anti-lag map, spool up turbo (that map is RPM limited), action map switching to normal map, when it's go time release the cruse toggle and away you go.

Like a rolling launch?

jwick · 12-10-2014, 02:12 PM

Quote:

Originally Posted by visconti

Like a rolling launch?

Exactly

visconti · 12-12-2014, 03:17 PM

Quote:

Originally Posted by BOLIO 671

Spoke to my tuner and did an internet search and could not find any remedies....So hopefully someone on the forum can help me out.....

I took the Z to the drag strip about 2 weeks ago. First time I ran her down the 1/4 mile with the Uprev Tune. I watched the Map Switching Vid on youtube and figured I practice a bit while I had some seat time at the track.

Here is the vid I was sent by my tuner.

Here's my problem. While prestaging at the light I already have the 2 Step/Launch Control map on while holding dwn the Cruise Control Button to switch into my Performance Map. While Prestaging I floor the gas while the 2 Step/Launch Control engages. Once the tree turns green I release the clutch and the cruise control button at the same time as illustrated in the Youtube vid. Everything works great...she gets off the line through 1st and 2nd gear all the way to redline, but once I get her into 3rd gear she suddenly goes into limp mode. I will be flooring the gas but its as though fuel is being cut off for the car to go into safe mode.

The funny thing is when I disabled the Launch Control and just launched off of my performance map by doing the old fashioned feathering of the gas and clutch the Z works fine and shifts throughout the gears without problems. I'm wondering whether anyone else has experience this problem with switching maps using the launch control and what are some of the remedies to this problem

I think you need this -

Huck · 12-12-2014, 05:00 PM

^yeah that would be nice except it's like $2400 I think lol.

visconti · 12-12-2014, 05:03 PM

Quote:

Originally Posted by Huck

^yeah that would be nice except it's like $2400 I think lol.

Huh.. Thats ecutek.. Ecu reflash

Sent from my iPhone using Tapatalk

ANMVQ · 12-26-2014, 08:41 AM

Yea but still no proven number to cost more the than UPREV by $300 or more.

visconti · 12-26-2014, 10:15 AM

Quote:

Originally Posted by ANMVQ

Yea but still no proven number to cost more the than UPREV by $300 or more.

I posted proven Dyno numbers over a year ago. That shows ecutek consistently making more power than a Uprev tune.

Those of you who keep thinking UpRev is better are just missing out on a better driving experience.

Sent from my iPhone using Tapatalk

Merv · 12-26-2014, 11:22 AM

Quote:

Originally Posted by visconti

I posted proven Dyno numbers over a year ago. That shows ecutek consistently making more power than a Uprev tune.

Those of you who keep thinking UpRev is better are just missing out on a better driving experience.

Sent from my iPhone using Tapatalk

Sorry,a little off topic,but I'll be looking for a tune once I get my highflow cats and cat back. Was your numbers on a na car or boosted. If na,I might go with Ecu tek. Only problem would be finding a shop in Canada on the west coast. I know there is an uprev tuner near by. Only question is how reputable they are.
Sorry for thread jack.

visconti · 12-26-2014, 11:24 AM

I shoot you a pM

Sent from my iPhone using Tapatalk

11-18-2014, 05:07 AM	#1 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Launch Control/2-Step Problems Spoke to my tuner and did an internet search and could not find any remedies....So hopefully someone on the forum can help me out..... I took the Z to the drag strip about 2 weeks ago. First time I ran her down the 1/4 mile with the Uprev Tune. I watched the Map Switching Vid on youtube and figured I practice a bit while I had some seat time at the track. Here is the vid I was sent by my tuner. Here's my problem. While prestaging at the light I already have the 2 Step/Launch Control map on while holding dwn the Cruise Control Button to switch into my Performance Map. While Prestaging I floor the gas while the 2 Step/Launch Control engages. Once the tree turns green I release the clutch and the cruise control button at the same time as illustrated in the Youtube vid. Everything works great...she gets off the line through 1st and 2nd gear all the way to redline, but once I get her into 3rd gear she suddenly goes into limp mode. I will be flooring the gas but its as though fuel is being cut off for the car to go into safe mode. The funny thing is when I disabled the Launch Control and just launched off of my performance map by doing the old fashioned feathering of the gas and clutch the Z works fine and shifts throughout the gears without problems. I'm wondering whether anyone else has experience this problem with switching maps using the launch control and what are some of the remedies to this problem __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 Last edited by BOLIO 671; 11-18-2014 at 05:13 AM.

11-24-2014, 06:39 AM	#3 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Yes I have the file..you will be able to take a look at it as long as u have the Uprev ROM editor program.....I have the Tuner model so making adjustments should be simple...PM me ur email and I will send u the ROM file/Tune. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

12-10-2014, 01:19 AM	#4 (permalink)
visconti Enthusiast Member Join Date: Jul 2012 Location: Norwalk, CT Posts: 455 Drives: Sub WRX STi Rep Power: 13	I don't think UpRev has launch control. __________________ John@vTune.us EcuTek Master Pro Tuner Visconti Tuning Webstore \| Support Documents & Downloads

12-10-2014, 08:51 AM	#5 (permalink)
mastuning Base Member Join Date: Dec 2014 Location: KSA Posts: 5 Drives: 370z Rep Power: 11	^with multiple maps, one can stage with modified say MAP 2 and toggle to MAP 1 when ready. its a split second. jwick likes this.

12-12-2014, 05:00 PM	#10 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	^yeah that would be nice except it's like $2400 I think lol. __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-26-2014, 08:41 AM	#12 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Yea but still no proven number to cost more the than UPREV by $300 or more. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-26-2014, 11:24 AM	#15 (permalink)
visconti Enthusiast Member Join Date: Jul 2012 Location: Norwalk, CT Posts: 455 Drives: Sub WRX STi Rep Power: 13	I shoot you a pM Sent from my iPhone using Tapatalk __________________ John@vTune.us EcuTek Master Pro Tuner Visconti Tuning Webstore \| Support Documents & Downloads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bee*R Rev Limiter/Launch Control	Perf.Des	Engine & Drivetrain	7	01-28-2013 04:48 PM
Launch Control	Calvin	Engine & Drivetrain	11	10-24-2012 08:26 AM
Launch control	Motinatan	Track / Autocross / Drifting / Dragstrip	1	07-03-2012 11:16 AM
Launch Control/2 Step	NIZZING	Forced Induction	9	01-05-2012 02:15 PM
Will the 7AT 370Z have launch control?	ZEEDREAMER	Nissan 370Z General Discussions	7	12-22-2008 10:15 PM