My dyno numbers

RumbleFish · 02-28-2014, 02:19 PM

Ok, so here's my numbers...Ok, not great but, noticeable improvement.

Performance Mods = Stillen G3, F.I. CBE.

Tuned by Seb @ Specialty Z w/ RevUp

7speed · 02-28-2014, 02:39 PM

Not bad, for minimal mods. I wouldn't do anything else you got a nice setup engine wise.

RumbleFish · 02-28-2014, 02:48 PM

Quote:

Originally Posted by 7speed

Not bad, for minimal mods. I wouldn't do anything else you got a nice setup engine wise.

Thanks, yeah, she's my daily drive so I wasn't looking to get too crazy with the mods.

ANMVQ · 02-28-2014, 02:48 PM

Good numbers don't down play and those are no tune also

RumbleFish · 02-28-2014, 02:52 PM

Quote:

Originally Posted by ANMVQ

...and those are no tune also

sixpax · 02-28-2014, 02:57 PM

I don't think the oil cooler helps much in the power department.

RumbleFish · 02-28-2014, 03:01 PM

Quote:

Originally Posted by sixpax

I don't think the oil cooler helps much in the power department.

Of course, fixed it.

Jordo! · 02-28-2014, 03:42 PM

Those values look spot on for those mods and that CF on a dynojet.

Any chance you would have access to/mind sharing the drf's with me for my database?

I can make any comparison graphs you want in return

RumbleFish · 02-28-2014, 03:57 PM

Quote:

Originally Posted by Jordo!

Any chance you would have access to/mind sharing the drf's with me for my database?

I can make any comparison graphs you want in return

Sorry, don't have access to that info.

ts-c63 · 02-28-2014, 04:37 PM

hfcs or test pipes will give u a good bump also

RumbleFish · 02-28-2014, 04:45 PM

Quote:

Originally Posted by ts-c63

hfcs or test pipes will give u a good bump also

Yes but, then I don't think it'd pass an emissions test in the future.

mag_black · 02-28-2014, 08:35 PM

Those are good numbers, what are you talking about?

RumbleFish · 02-28-2014, 08:40 PM

Quote:

Originally Posted by mag_black

Those are good numbers, what are you talking about?

I guess I was expecting more based on overblown manufacturer claims.

Don't get me wrong, I'm very happy with the way she runs, just thought I'd get a few more ponies.

RumbleFish · 02-28-2014, 08:43 PM

Just to clarify...I'm very happy with the work & tune done by Seb.

I think he got all there was to get out of my current setup.

mag_black · 02-28-2014, 08:59 PM

I was the same way after my tune. I expected higher peak hp/tq, but if you have the .drf files and use winpep, you will see the whole story when you compare runs. Your mid range makes the most from a tune.

02-28-2014, 02:39 PM	#2 (permalink)
7speed Track Member Join Date: Jan 2013 Location: Dallas Posts: 697 Drives: 09 370 sports clone Rep Power: 13	Not bad, for minimal mods. I wouldn't do anything else you got a nice setup engine wise. RumbleFish likes this. __________________ 09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd

02-28-2014, 02:48 PM	#4 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Good numbers don't down play and those are no tune also __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

02-28-2014, 03:42 PM	#8 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	Those values look spot on for those mods and that CF on a dynojet. Any chance you would have access to/mind sharing the drf's with me for my database? I can make any comparison graphs you want in return __________________ Enjoy it. Destroy it.

02-28-2014, 08:35 PM	#12 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Those are good numbers, what are you talking about? __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

02-28-2014, 08:43 PM	#14 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8240	Just to clarify...I'm very happy with the work & tune done by Seb. I think he got all there was to get out of my current setup. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

02-28-2014, 04:37 PM	#10 (permalink)
ts-c63 Enthusiast Member Join Date: Feb 2011 Location: nyc/nj Posts: 384 Drives: 2012 370z 7At Rep Power: 14	hfcs or test pipes will give u a good bump also

02-28-2014, 08:59 PM	#15 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I was the same way after my tune. I expected higher peak hp/tq, but if you have the .drf files and use winpep, you will see the whole story when you compare runs. Your mid range makes the most from a tune. TerribleONE and RumbleFish like this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My dyno numbers	P's_Z	Tuning	39	04-25-2014 06:13 PM
Do my dyno numbers seem a little low	cubbies1031	Nissan 370Z General Discussions	2	07-31-2012 01:15 AM
My Dyno Numbers	joshs09slvrZ	Tuning	20	10-27-2011 08:39 AM
Dyno Numbers with mods	jtgarza3	Nissan 370Z Roadster (Convertible)	5	05-11-2011 11:59 PM
Dyno Numbers	PR370z	Intake/Exhaust	13	12-05-2010 10:56 AM