Motion Lab Tuned 2009 370Z 298WHP/284WTQ Invidia, K&N, UpRev, and MLT

Motion Lab

Shop: Motion Lab Tuning
Dyno Type: DynoCom FX5000-AWD
Fuel: 93OCT
Target AFR: 12.3:1
SAE Corrections: Default Corrections
Peak HP at RPM: 298whp @ 6800 RPMs
Peak Torque at RPM: 284wtq @ 4050 RPMs
Transmission: Stock 6speed
Gear: 4th
Engine Management: UpRev Osiris tuning suite
Engine/Power Modifications:

• Invidia "Gemini" catback exhaust
• Test pipes
• K&N Short ram intakes
• Motion Lab UpRev Pro-Tune

Here is another N/A tune we did recently on a 2009 370z. It was the base model with the sport package and a few nice bolt on upgrades he put on himself before coming to visit. The black line was his baseline with the mods installed, and the red lines are the results post tuning. This is actually the highest milage Z we have done to date getting close to 70,000mi on the clock. He went with some nice simple mods that netted him some good power after tuning. Overall based off these results I feel like there are definitely some better performing parts on the market, but this was a nice affordable setup for a clean daily driven Z.

Final HP/TQ:


Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

__________________

FireDan50

Sweet, more 370Z love at Motion Lab ��

__________________
VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas)
Dan's VSR top-mount turbo 370z

Motion Lab

You out of anybody should know we love a good VQ project .

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

__________________

7speed

Looks like short rams, help with that torque? But he should scrap those asap.

Can't wait to get a tune done by March, if I ever decide between Ecutek and uprev.

__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd

NeverBoneStck

That is some good tq on a na ..

__________________
Juiced! That is all you need to know !!

Motion Lab

Yeah, I agree I think the car would have made a bit more power up top with something like the Stillen Gen3 long tubes or Takeda Attack intake system.

We pretty much exclusively use UpRev. ECUTek is nice software though not as widely supported as Osiris at this point.

Yeah we were pleased with the gains made on the dyno after tweaking VVEL and everything else.


Thanks for the comments!
Alex Goodwin
AlexG@motionlabtuning.com

__________________

NEEZMO

Yea pretty high tq, good job guys

__________________
2012 Nismo 370z, Stillen Gen 3 Intake, AAM Short Tail Exhaust, GTM Test Pipes, Uprev Tune. 322whp 289tq

ANMVQ

OK Alex, You really have to tell me HOW THE HELL you get that much TQ.. When you tune mine I better see those numbers also.. LOL . . . .

But as usual GREAT WORK!!

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Motion Lab

Thanks man !

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

__________________

ANMVQ

seriously I BETTER see those TQ numbers. LOL

Props again Alex

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

FPenvy

i'm just confused on how this car baselined with 271wtq untuned with those mods. i dont think i've seen many tuned/modded N/A Z's with that much wtq before. doesnt even make sense lol

but then again i never seen peoples numbers of a dynocom dyno so idk how it compares to other types.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Motion Lab

I'm not entirely sure as I haven't seen any comparison charts yet. One of our customers has ran on a DynoJet since his tune and actually made an extra 44WHP on the DynoJet versus our DynoCom (boosted Z). He didn't tell me how the torque compared though.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

__________________

FPenvy

i was just curious since i am running similar mods (intake/exhaust/tune) and my TQ numbers are about 20ft/lbs less but i also have 20+ more WHP than the car's numbers you listed above. just weird seeing that big of a gap is all.

mine was 324whp and 258wtq when dyno tuned. (mods listed in sig)

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Motion Lab

What kind of Dyno did your tuner have? Like you said every dyno reads differently though so the true test would be a same day or same week comparison with similar weather conditions.

Interesting though, thanks for posting up!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

__________________

MacLean

I'm at 298 whp & 248 wtq and this was done on a Mustang Dyno. The turner stated that there Mustang Dyno will read lower than everyone else and do not read too much into the numbers. All the mods that are in my sig are what gave me my whp & wtq.

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l