Clutch & Flywheel Combo

mmendez

I will change my clutch soon and I am looking for a good setup of a clutch & flywheel within the $1,000 range. My car is N/A with typical bolts on... Reviews and info. would be great

__________________
2010 370Z NISMO #0273 Magnetic Black - Injen SP Series Intake - Stillen Exhaust - Test Pipes - Stillen Cross/Slotted Rotors - Window Tint - IMSA & Nismo Decals.

MacLean

Go with the ZSpeed HD CSC and the JWT HD Clutch & Flywheel. I spent $1,073 for the two plus installation.

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l

fairlady_z34

i'd go with the southbend dxd stage 2 endurance clutch kit with the 19lb flywheel to reduce transmission chatter. i use to have a jwt flywheel and chatter like diesel truck and sold it. if you dont mind the chatter go ahead plus its lighter

luigi90210

I have a JWT clutch, chatter is not bad unless you have windows down and no music on. Music on and you can't hear anything and windows up you can't really hear it, its almost like background noise.

You will need a HD CSC, I got mine done when I was getting my CSC replaced under warranty and my new factory one is starting to fail, I have only had it on for 5k miles now.

__________________
SOLD 370z
New Car:classified
DD:2011 Mini Cooper S stock

MacLean

+1....... Southbend is ok, but the shop I went to did not recommend it because the cars that had it installed had issues.

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l

mag_black

From the research that I've done; most recommended Southbend DxD 19lbs steel flywheel.

__________________

Alstann

Southbend Stage 3 6-puck drag clutch and Southbend "Black" steel flywheel, checking in.

It may be a bit overkill for some people, but I'll be damned if I find anything with more driveability, engagement force, and peace of mind with anything else but a twin-disk.

__________________

fairlady_z34

how does the clutch pedal feel comapre to stock?

zguynate

I had the JWT on my 350z and the drivability was awesome. Different cars but same exact clutch.

__________________
2009 370z touring w/sports package

Alstann

I'll try my best to describe the engagement and pedal feel. Compared to stock, it is definitely stiffer, but nothing you couldn't get used to. In heavy city traffic, I do forsee some sore legs, however. Better eat those greens.

The clutch engagement is not super-immediate, like an on or off switch on a twin-disk, but the clutch DOES NOT like to be slipped. Any slip, and the clutch will refuse to grab and hold power, and you'll be just burning up the clutch. The way I take off, is to pulse both the gas and clutch in an almost alternating fashion, as to give the clutch several hard engages, and using up the momentum from the flywheel so it starts moving. It was jerky at first, but you get used to it and it becomes smooth. All of my friends who drive my car say the same - the clutch doesn't grab and stall the car immediately, but moving from a standstill smoothly takes some getting used to.

Keep in mind I do have the steel flywheel, so if you do go aluminium, your experience may be different.

All in all, I daily drove this way until I got my beater car for daily driving no problems, and I got used to it in a week, and I have no regrets. It's a bit more expensive than the JWT setup or other setups, but I have full confidence in this clutch when I do spirited driving or drag racing at the strip.

__________________

fairlady_z34

Thanks. although i want it bad probably wont end up getting it. i get stuck in the los angles traffic too much to be able to handle that clutch. dont want one leg to look like the incredible hulk and the other to look like jimmy neutron

Joepro

Call joe at zspeedperfrmance, he will literally educate you on the proper clutch for driving conditions.... No issues with my southbend SS clutch with the aluminum flywheel and a zspeed csc. My friend describes it as the perfect street clutch, its easy to drive around town, but when you start slamming gears it locks up nice and hard This clutch is basically a JWT, uses the same exedy disk just a southbend pressure plate. THe CSC upgrade is a necessity!
http://www.zspeedperformance.com/Sou...NSK1000AFW.htm

__________________
Swift|Koni|SPC| FI CBE|Z1|Stillen|Sbend|Zspeed|R/T Tuned|523 whp|458 tq|10.5 psi|SOLD
Joepro's Journal|Joepro's Boosted Performance Build |Pittsburgh-Western-Pa-Ohio-Wv-Group

7419sundat

Check out z1 too.

mmendez

Thanks, z1 has a great price, but the fly wheel is steel, not aluminum. Looks like JWT is the one....

__________________
2010 370Z NISMO #0273 Magnetic Black - Injen SP Series Intake - Stillen Exhaust - Test Pipes - Stillen Cross/Slotted Rotors - Window Tint - IMSA & Nismo Decals.

Vnismo370z

+1 on Z1!

__________________
starting over