Motion Lab Tuned Nismo 484whp/400wtq @ 12.5psi w/ Vortech impeller on the Stillen S/C

Motion Lab

Shop: Motion Lab Tuning
Dyno Type: Dynocom FX5000-AWD
Boost: 12.5psi
Fuel: 93OCT
Target AFR: 11.5:1
SAE Corrections: Default Corrections
Peak HP at RPM: 484whp @ 6500 RPMs
Peak Torque at RPM: 400wtq @ 5750 RPMs
Transmission: Stock 6speed
Gear: 4th
Engine Management: UpRev Osiris tuning suite
Engine/Power Modifications:

• Stillen supercharger kit w/ Vortech impeller upgrade
• DW 1000cc injectors
• DW 320LPH fuel pump
• GTM Resonated Test Pipes
• Berk Technology Cat-back exhaust
• GT-R Spark plugs
• z1motorsports clutch kit and lightweight flywheel
• 34Row SETRAB oil cooler w/ custom built lines.
• Turbosmart BPV

Here are the most resent results from a tuning session we had with the Nismo Z with the Vortech upgraded Stillen supercharger kit. We were loosing boost up on the top end during our last session so we tried to take some steps to make sure we were getting everything we could out of it. We replaced the belt and swapped out to the Turbosmart dualport bpv. Also since the last tuning session we switched to the GTM Resonated test pipes and the Berk Technology dual exhaust. The car sounds absolutely ridiculous now! Our customer Nate was amped up and from checking the forums he said we seem to have helped him create the highest HP supercharged 370z ever posted. The car pulled 484whp and 400wtq on the first pull. The graph looked decent but we continued to clean it up some. After working on it for another hour or so we rolled off the dyno with right around 465whp once the heatsoak took hold, but with a smoother graph and more power in the mid range thanks to the VVEL tuning.


Highest run HP/TQ w/ Boost Graph:



Let me know if you have any other questions! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook

Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

theDreamer

Good results, will update the finished builds thread.

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Chuck33079

Can you elaborate a little?

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

elperuano

So this Stillen SC kit is no longer a Stillen but a vortech correct?

Chuck33079

I thought it was always a Vortech blower.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Motion Lab

As you can see the graph wasn't perfectly smooth like some of the others we have posted. It might be tolerable This was our highest peak power run, but it was also one of the first pulls of the day so there was much less heat soak. We continued to adjust the VVEL, fuel, and timing tables after this initial pull. I'm confident the car would make even more power on a cool run at this point. However by the time the tuning session was totally complete the heatsoak was robbing us of roughly 15-20hp peak power, but with the additional VVEL tuning we were making more power everywhere else on the graph.

Yes this kit uses the V3-SCi trim blower. The 928Motorsport impeller does not fit this particular blower. Vortech however has a factory upgrade impeller that is larger than the one included in the out of the box stillen kit. This impeller seems to make good power increase over the 928Motorsport impeller, which we have also tuned, that puts out around 420-430whp.

It is and always will be a Vortech blower, there's just not much left that is Stillen about this particular kit outside of the intake manifold and their bracket


Thanks for the comments and questions guys!


Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Chuck33079

Actually, I was hoping for a little more in depth expanation of the changes to the VVEL specifically. A lot of us boosted guys have been waiting (im)patiently for the results of tweaking the VVEL.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Motion Lab

Ill see if my tuner can chime in additionally this afternoon for a more in depth explanation or what was done. We have been meaning to do a little write-up on it. Every Z we have been playing with we have been picking up power in the mid-range, and making the torque curve fatter. Great technology, I'm just not the right person to tell you what exactly was done and how the software works. Also once he is done in the dyno room I will be able to grab the other graph and overlay them to show the changes in the midrange.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Chuck33079

And now I have wood.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Motion Lab

. Well we will try and provide you with more wood-worthy info later!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

indyn

wow, 400 tq on Stillen kit, that's amazing.
So the only upgrade is the Vortech impeller kit, no other pulley, tubing, MAF upgrades, right?
is it possible to see the pre-VVEL dyno graph on this?

But job well done Motion Lab.


BTW, you've two CBE's listed.

elperuano

From what I think OP said was its pretty much no longer a Stillen kit. The title will be confusing to some.

BigT

Original stillen blower with a modified wheel, stillen intake manifold, stillen intercooler pipe. Why would this not be considered a stillen kit? Kind of reminds me of the GTM 1.5 kit.

__________________
2014 Jeep GC
1998 Talon TSI awd
2011 Z Sport - SOLD

Motion Lab

I was just joking regarding the kit. Obviously credit goes to Stillen because without their kit design he would have not had a nice Vortech blower in the engine bay to modify. There's not much left to do beyond a potential water/meth set-up to get some additional power out of the current kit.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

elperuano

What? Did u not read the upgrades n changes made?