Motion Lab Tuned Nismo 484whp/400wtq @ 12.5psi w/ Vortech impeller on the Stillen S/C

Motion Lab

Shop: Motion Lab Tuning
Dyno Type: Dynocom FX5000-AWD
Boost: 12.5psi
Fuel: 93OCT
Target AFR: 11.5:1
SAE Corrections: Default Corrections
Peak HP at RPM: 484whp @ 6500 RPMs
Peak Torque at RPM: 400wtq @ 5750 RPMs
Transmission: Stock 6speed
Gear: 4th
Engine Management: UpRev Osiris tuning suite
Engine/Power Modifications:

• Stillen supercharger kit w/ Vortech impeller upgrade
• DW 1000cc injectors
• DW 320LPH fuel pump
• GTM Resonated Test Pipes
• Berk Technology Cat-back exhaust
• GT-R Spark plugs
• z1motorsports clutch kit and lightweight flywheel
• 34Row SETRAB oil cooler w/ custom built lines.
• Turbosmart BPV

Here are the most resent results from a tuning session we had with the Nismo Z with the Vortech upgraded Stillen supercharger kit. We were loosing boost up on the top end during our last session so we tried to take some steps to make sure we were getting everything we could out of it. We replaced the belt and swapped out to the Turbosmart dualport bpv. Also since the last tuning session we switched to the GTM Resonated test pipes and the Berk Technology dual exhaust. The car sounds absolutely ridiculous now! Our customer Nate was amped up and from checking the forums he said we seem to have helped him create the highest HP supercharged 370z ever posted. The car pulled 484whp and 400wtq on the first pull. The graph looked decent but we continued to clean it up some. After working on it for another hour or so we rolled off the dyno with right around 465whp once the heatsoak took hold, but with a smoother graph and more power in the mid range thanks to the VVEL tuning.


Highest run HP/TQ w/ Boost Graph:



Let me know if you have any other questions! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook

Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance