Nissan 370Z Forum

EcuTek is proud to announce the release of ProECU Tuning Tools for the Nissan 370Z

Originally Posted by visconti Not on the 370Z platform, but with the GTRs It might be best that you wait until we have map switching and a few other things

370Z Forums HOME

My Picture Album

Nissan 370Z Pictures

Premium Membership

Become a Forum Sponsor

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Tuning
EcuTek is proud to announce the release of ProECU Tuning Tools for the Nissan 370Z

Notices

Hello Unregistered

I am aware of the slow load time of the forums. I am working in the background to resolve the issue.. I truly apologize for the issue and any other inconvenience this has caused/is causing.

Thank you for your patience. I will keep you updated.

A. Kaiser

Administrator

Like Tree

365Likes

Reply

visconti EcuTek is proud to announce... 04-17-2013, 07:47 AM

logenl7 What kinda price are we... 04-17-2013, 08:09 AM

G37sHKS Will it work with G37 Gulf... 04-17-2013, 09:05 AM

visconti This software will not be the... 04-17-2013, 09:19 AM

tower74 This is cheaper than UpRevs I... 04-17-2013, 12:36 PM

Coon-azz Would you be able to give us... 04-29-2013, 11:31 AM

visconti I've seen 15-20WHP gains with... 04-29-2013, 01:23 PM

Coon-azz Now that's what I'm talking... 04-29-2013, 02:04 PM

tiger123 John, I live in the... 04-29-2013, 09:35 PM

tiger123 [QUOTE=visconti;2271071]This... 05-06-2013, 05:45 PM

rich2342 That's some expensive time... 01-22-2014, 07:44 PM

visconti Go look at their thread and... 01-22-2014, 07:48 PM

Jordo! Will there be anything built... 04-17-2013, 10:05 AM

visconti Is that a issue on these... 04-17-2013, 10:17 AM

Jordo! Allegedly, it is possible to... 04-18-2013, 05:14 PM

visconti So I looked into this. ... 04-18-2013, 05:22 PM

More replies below current depth...

G37sHKS G37 Coupe 2009 GCC 04-17-2013, 10:17 AM

visconti I'm 100% sure if we have... 04-17-2013, 10:23 AM

Neo187H So what can this do over the... 04-17-2013, 10:23 AM

visconti Advanced Nissan Tools - ... 04-17-2013, 10:54 AM

redline10000 I don't see 2011 370z US... 04-17-2013, 12:07 PM

visconti EcuTek has the ability to... 04-17-2013, 12:20 PM

Alstann Does this software have... 04-17-2013, 12:23 PM

Mitco39 Purrrrrty neat! The ABS stuff... 04-17-2013, 12:26 PM

ZKraken22 I love this. visconti does a... 04-17-2013, 12:27 PM

JC671 Update First Page please 05-04-2013, 05:30 PM

JC671 ? 05-06-2013, 05:35 PM

370z2013 Seriously man! I know what... 05-25-2013, 03:08 PM

visconti Sorry to hear ! What... 04-17-2013, 12:32 PM

tower74 Finally. It's just to bad... 04-17-2013, 12:33 PM

visconti EcuTek is late in the game... 04-17-2013, 12:36 PM

ZKraken22 Any basline dyno numbers of a... 04-17-2013, 12:55 PM

Nixlimited I'm afraid that would show... 04-17-2013, 12:59 PM

Alstann This is interesting...I might... 04-17-2013, 01:17 PM

wheee! interesting.... 04-17-2013, 01:22 PM

dP3NGU1N I'm glad we're finally... 04-17-2013, 01:22 PM

chrischhorn May have to sell my license... 04-17-2013, 01:24 PM

redline10000 Funny that this came out... 04-17-2013, 01:36 PM

BigT Interesting to see how the... 04-17-2013, 01:45 PM

Sh0velMan We definitely need more... 04-17-2013, 01:57 PM

MyKindaGuise Hey Visconti, I am the guy... 04-17-2013, 02:01 PM

Sh0velMan Oh, and whatever... 04-17-2013, 02:07 PM

visconti This is true ! Good... 04-17-2013, 02:33 PM

MyKindaGuise Yes Will has talked you guys... 04-17-2013, 02:39 PM

asdfsammich Competition is a beautiful... 04-17-2013, 02:45 PM

Legz VVEL tuning for FI yes... 04-17-2013, 02:54 PM

visconti SD Tuning is down the road... 04-17-2013, 04:48 PM

XwChriswX If you already have UpRev... 04-17-2013, 05:00 PM

Z eliminator Do you have the settings for... 04-17-2013, 06:27 PM

roplusbee Subbed 04-17-2013, 06:57 PM

Baer383 Nice software but doesn't do... 04-17-2013, 08:46 PM

BigT Well that sucks. But, what... 04-17-2013, 08:57 PM

Sh0velMan I didn't get this... 04-17-2013, 08:58 PM

Baer383 He said this when he first... 04-17-2013, 09:16 PM

roplusbee From what I understand, UPREV... 04-17-2013, 09:13 PM

Baer383 With Uprev you set your... 04-17-2013, 09:17 PM

roplusbee Roger that. I guess I was... 04-18-2013, 01:35 AM

Mr&Mrs Sub'd 04-18-2013, 02:37 AM

Mitco39 What about the ability to... 04-18-2013, 09:26 AM

visconti Yes it is ;) VVEL... 04-18-2013, 02:10 PM

Mitco39 SynchroRev Matching - When... 04-18-2013, 02:18 PM

visconti I can look into it.. I'll... 04-18-2013, 02:21 PM

Mr.Squeeze SRM does not stop working... 04-20-2013, 12:42 AM

XwChriswX What about the cost part of... 04-18-2013, 02:22 PM

roplusbee Roger that. I was not... 04-18-2013, 06:33 PM

Mitco39 Ill also add that I would... 04-18-2013, 02:26 PM

Sh0velMan Sounds like you may be on to... 04-18-2013, 02:29 PM

XwChriswX I can only imagine the amount... 04-18-2013, 02:34 PM

Sh0velMan I'm definitely not skilled... 04-18-2013, 02:38 PM

G37sHKS I don't understand why the... 04-18-2013, 02:54 PM

Sh0velMan lol, from this statement I... 04-18-2013, 03:01 PM

G37sHKS 3 of them are correct, I... 04-18-2013, 03:16 PM

Sh0velMan No? That's why I said... 04-18-2013, 03:17 PM

Mitco39 There are many of us who like... 04-18-2013, 03:04 PM

G37sHKS Its cool man :tup: 04-18-2013, 03:18 PM

visconti End-user tuning isnt here... 04-18-2013, 03:29 PM

chknhawk Sub'd And just for... 04-18-2013, 03:32 PM

Trips I'd like to let folks know... 04-18-2013, 04:15 PM

theDreamer In for more details, and not... 04-18-2013, 04:21 PM

visconti The tables they have shown in... 04-18-2013, 04:39 PM

visconti Yeah, I'm not sure if that's... 04-20-2013, 10:23 AM

370Z JT Who are the authorized master... 04-20-2013, 09:18 PM

shickles So when will we be able to... 04-21-2013, 09:21 AM

visconti You, very soon. Hopefully... 04-21-2013, 05:33 PM

Z_Enthusiast The "programming package"... 04-25-2013, 10:18 PM

Z_Enthusiast Your software sounds amazing... 04-25-2013, 10:23 PM

Mr.Squeeze Uprev may have end user... 04-26-2013, 09:20 AM

visconti This is not end user tuning... 04-26-2013, 08:17 AM

visconti I agree. The stuff that's... 04-27-2013, 01:57 PM

Baer383 A Lot of us tune our own cars... 04-27-2013, 02:43 PM

XwChriswX Then shall we just leave all... 04-28-2013, 05:01 PM

roplusbee BLAM! I couldn't have said... 04-28-2013, 09:54 PM

visconti I'm not really sure what you... 04-28-2013, 10:09 PM

kensnismo Hey John when can we get it... 04-28-2013, 10:16 PM

XwChriswX So then why haven't we seen... 04-29-2013, 10:03 PM

roplusbee Tuning cars in TX? 04-28-2013, 10:17 PM

roplusbee Dynotronics Inc is the only... 04-28-2013, 10:19 PM

visconti Anyone interested in locating... 04-28-2013, 10:36 PM

JARblue Dynotronics has a track Z... 04-29-2013, 11:49 AM

Coon-azz Keep us posted. I was big... 04-29-2013, 11:56 AM

Dynotronics1 Yeah, we spent the weekend at... 04-29-2013, 04:43 PM

370Z JT What about master tuners in... 04-28-2013, 10:33 PM

visconti If there isn't one listed in... 04-28-2013, 10:37 PM

DarkJak Glad I have 3 months before I... 04-29-2013, 01:20 AM

JARblue Will do :tup: I am stock... 04-29-2013, 11:59 AM

diddy535 Sub'd 04-29-2013, 02:01 PM

diddy535 Not to thread jack but... 04-29-2013, 07:20 PM

visconti Yes i can do remote tunes ... 04-29-2013, 11:53 PM

XwChriswX Yes you have a thread showing... 04-29-2013, 11:58 PM

visconti Really There's a recent... 04-30-2013, 12:19 AM

XwChriswX And what about the full bolt... 04-30-2013, 02:19 PM

More replies below current depth...

G37sHKS Im looking to swap from Uprev... 04-30-2013, 03:30 PM

Mr.Squeeze EcuTek is very successful in... 04-30-2013, 05:03 PM

MyKindaGuise Squeeze and his build going... 04-30-2013, 05:26 PM

MyKindaGuise My car...if everything goes... 04-30-2013, 03:33 PM

seymore4 No one is debating the GTR... 04-30-2013, 05:16 PM

SS_Firehawk If you want to win existing... 04-30-2013, 05:23 PM

visconti If anyone in Ohio wants some... 04-30-2013, 05:25 PM

DEpointfive0 Well shít, he's putting his... 04-30-2013, 05:29 PM

Mr&Mrs Make it happen people! 04-30-2013, 07:02 PM

gomer_110 Where in Ohio? I'm up in... 04-30-2013, 08:34 PM

faya sub'd! 04-30-2013, 06:29 PM

visconti I'm in Toledo... Can you... 04-30-2013, 11:28 PM

gomer_110 I could swing by after work.... 05-01-2013, 07:07 AM

JARblue Git-R-Dun!! I'll be taking... 05-01-2013, 07:35 AM

Ron Wanna tune my turbo Z then?... 05-01-2013, 08:46 AM

Dynotronics1 we would be happy too, and... 05-01-2013, 09:06 AM

wheee! Personally, I find most... 05-01-2013, 10:13 AM

MyKindaGuise I agree. There needs to be... 05-01-2013, 10:46 AM

370Z JT ^+1 Interested to see what... 05-01-2013, 10:15 AM

O&G Can u PM me pricing and... 05-01-2013, 10:47 AM

Dynotronics1 That for me or JV? We are... 05-01-2013, 11:00 AM

visconti Don't think it matters. If... 05-01-2013, 11:43 AM

O&G Thank you sir 05-01-2013, 12:26 PM

SS_Firehawk Man I hope this kicks as much... 05-01-2013, 11:47 AM

Ron ^^Justin keep me posted! 05-01-2013, 12:37 PM

MyKindaGuise tl;dr 05-01-2013, 07:57 PM

XwChriswX Readers Digest Version: 1.... 05-01-2013, 08:00 PM

gomer_110 One more thing Visconti... 05-01-2013, 08:04 PM

visconti EcuTek added support to your... 05-03-2013, 03:43 PM

roplusbee I stopped listening a while... 05-01-2013, 09:59 PM

diddy535 It's just going to take time.... 05-02-2013, 08:55 AM

JARblue It's not that it doesn't... 05-02-2013, 09:42 AM

MyKindaGuise They have my 2011 US 6MT... 05-02-2013, 10:18 AM

JARblue Excellent :tiphat: I hope... 05-02-2013, 10:25 AM

O&G My tuner has been familiar... 05-02-2013, 10:06 AM

Nixlimited I would like to see some... 05-02-2013, 10:39 AM

elperuano It's all about customer... 05-02-2013, 10:51 AM

JARblue That's your decision :tiphat:... 05-02-2013, 11:09 AM

Sh0velMan This is also my thought. I'm... 05-02-2013, 11:11 AM

Mr.Squeeze I met with Jon Visconti about... 05-02-2013, 03:21 PM

G37sHKS What do you mean by boost by... 05-02-2013, 04:44 PM

O&G Seeing as there isn't a boost... 05-02-2013, 04:49 PM

visconti This is one of the many... 05-02-2013, 05:15 PM

Mr.Squeeze Boost by gear is a method... 05-02-2013, 08:10 PM

GaleForce Really!? Sounds awesome!... 05-02-2013, 04:47 PM

elperuano I suppose ur right about that... 05-02-2013, 11:15 AM

Sh0velMan LOL. I won't argue that... 05-02-2013, 11:26 AM

MyKindaGuise Do you need me to break out... 05-02-2013, 01:30 PM

BigT I've read all of Visconti's... 05-02-2013, 11:26 AM

Z370Z011 :iagree: 05-02-2013, 12:37 PM

Infamous What he said. I think it's... 05-02-2013, 12:44 PM

elperuano If that's ur kind of thing be... 05-02-2013, 01:57 PM

de_dust i just want to clarify... 05-02-2013, 04:01 PM

visconti True expect R/T is not a... 05-02-2013, 04:40 PM

G37sHKS Can somebody elaborate flex... 05-02-2013, 05:18 PM

visconti Here are a few videos.. ... 05-02-2013, 05:48 PM

gomer_110 User defined tables and... 05-02-2013, 08:00 PM

O&G ^^^^^ Yes, very kool ... 05-02-2013, 08:02 PM

SS_Firehawk Being able to run E85 and not... 05-02-2013, 08:09 PM

gomer_110 This is where the ethanol to... 05-02-2013, 08:22 PM

Nixlimited Wow, I had no idea EcuTek had... 05-03-2013, 09:51 AM

luigi90210 Is there any chance we can... 05-03-2013, 10:31 AM

diddy535 So use E85 but add ethanol,... 05-03-2013, 10:39 AM

visconti That is also in the works ... 05-03-2013, 10:42 AM

luigi90210 I'm assuming you meant to... 05-03-2013, 11:00 AM

visconti Yes Sorry -John 05-03-2013, 11:24 AM

red6spd Interested to see how this... 05-03-2013, 11:16 AM

Ron wow... yeah uprev who? 05-03-2013, 02:28 PM

shivers Any word on when/if the G37... 05-03-2013, 04:17 PM

visconti We can support any Ecu just... 05-03-2013, 04:24 PM

Dynotronics1 Exactly! If anyone has an... 05-03-2013, 05:00 PM

shivers Thanks for the info. Wish I... 05-05-2013, 09:11 AM

Dynotronics1 we can also send you one of... 05-06-2013, 10:55 AM

SS_Firehawk For those of us who have the... 05-03-2013, 05:38 PM

visconti We stock tune files, so if... 05-03-2013, 07:03 PM

SS_Firehawk PM me an email and I'll send... 05-03-2013, 07:29 PM

visconti It needs to be a dump... 05-03-2013, 10:28 PM

elperuano Hey Squeeze, everythin ECUtek... 05-04-2013, 04:00 PM

Mr.Squeeze For the most part it seems... 05-04-2013, 04:26 PM

Dynotronics1 Flat foot shifting is one of... 05-04-2013, 04:46 PM

Mr.Squeeze Now we are talking another... 05-04-2013, 05:42 PM

elperuano Lol I can has ur racelogic... 05-04-2013, 06:22 PM

Mr.Squeeze Lol it's not going anywhere... 05-04-2013, 07:21 PM

ENT-Z I don't see how you would be... 05-04-2013, 08:07 PM

Mr.Squeeze I am not sure witch is the... 05-05-2013, 09:42 AM

visconti It's called the cruise... 05-05-2013, 12:37 AM

Z370Z011 i have a question now that... 05-05-2013, 12:52 AM

visconti Sure you can help I can... 05-05-2013, 06:17 PM

visconti [QUOTE=tiger123;2303117] I... 05-08-2013, 07:27 AM

V8Killer I currently had UpRev... 05-08-2013, 08:22 AM

visconti Not on the 370Z platform, but... 05-08-2013, 08:52 AM

V8Killer What other things are you... 05-22-2013, 09:58 AM

ANMVQ How would the E tune work.... 05-08-2013, 03:21 PM

visconti The tune itself is $350 ,... 05-10-2013, 09:00 PM

gomer_110 John, any idea when the VVEL... 05-10-2013, 09:07 PM

roplusbee This is the question of the... 05-10-2013, 09:44 PM

visconti It is part of the software,... 05-11-2013, 02:04 PM

XwChriswX This is probably your biggest... 05-11-2013, 04:43 PM

visconti I wouldn't say that. ... 05-12-2013, 03:12 PM

Dynotronics1 Very true! You should see... 05-12-2013, 06:18 PM

Chuck33079 Nobody likes a tease. Out... 05-12-2013, 06:39 PM

Dynotronics1 Not a tease, we just don't... 05-13-2013, 08:47 AM

visconti I'm holding off on doing... 05-13-2013, 01:07 AM

visconti Make awesome progress today... 05-14-2013, 12:36 PM

gomer_110 Details??? Hoping its VVEL... 05-14-2013, 12:38 PM

visconti http://www.the370z.com/tuning/... 05-14-2013, 12:43 PM

JARblue That would be fantastic news... 05-14-2013, 12:45 PM

gomer_110 Just saw that after I posted... 05-14-2013, 12:45 PM

kensnismo subed 05-14-2013, 03:50 PM

MacLean So what is the story with the... 05-14-2013, 05:15 PM

Dynotronics1 we have been playing with a... 05-14-2013, 09:42 PM

gomer_110 Are you guys tuning the VVEL... 05-14-2013, 09:50 PM

scionide I called GTM (they're the... 05-14-2013, 11:09 PM

SAM@GTM You spoke to me on the phone... 05-15-2013, 04:18 AM

MacLean Nice. I thought you guys... 05-15-2013, 08:24 AM

theDreamer They are in New Braunfels. 05-15-2013, 08:29 AM

Dynotronics1 New Braunfels, right up the... 05-15-2013, 09:48 AM

More replies below current depth...

visconti I've just been tuning them as... 05-14-2013, 06:23 PM

MacLean Still would like to hear... 05-14-2013, 07:35 PM

370Z JT Was GTM just recently added?... 05-15-2013, 04:17 AM

visconti If someone wants to come and... 05-15-2013, 07:57 AM

arnoldas By at our own risk do you... 05-15-2013, 02:42 PM

BigT I'm in to hear some more... 05-15-2013, 12:30 PM

MacLean +1...... :iagree: I like... 05-15-2013, 12:43 PM

Chuck33079 This. I need more than vague... 05-15-2013, 12:47 PM

Dynotronics1 Tell ya what, I'll put my... 05-15-2013, 02:54 PM

JARblue My schedule changed up a bit,... 05-15-2013, 03:06 PM

More replies below current depth...

370Z JT Why are members not posting... 05-15-2013, 12:52 PM

JARblue I will when I have mine... 05-15-2013, 01:21 PM

Coon-azz Dyno's cost additional funds?... 05-23-2013, 07:37 AM

visconti Idk not everyone is on the... 05-15-2013, 01:15 PM

Chuck33079 Pm'd 05-15-2013, 03:32 PM

visconti Hopefully I'll get to meet... 05-16-2013, 01:37 AM

JARblue I picked up my Z from Joe @... 05-22-2013, 09:09 AM

Mitco39 How far out is this from... 05-22-2013, 09:15 AM

Infamous Say what? More info please.... 05-23-2013, 03:23 AM

G37sHKS how accurate is the remote... 05-23-2013, 06:02 AM

Dynotronics1 It is just as accurate as if... 05-23-2013, 07:06 AM

arnoldas With remote tuning can you... 05-23-2013, 02:20 PM

Dynotronics1 that will most likely come... 05-23-2013, 02:57 PM

More replies below current depth...

G37sHKS Ill wait till you guys start... 05-23-2013, 03:58 PM

Dynotronics1 If nothing else, let me know,... 05-23-2013, 04:35 PM

gSwift Anyone in the Georgia area... 05-23-2013, 06:55 PM

V8Killer ? 05-23-2013, 09:49 AM

N0SL3N I talked to an EcuTek tuner... 05-23-2013, 08:57 PM

Chuck33079 For those of us currently... 05-25-2013, 01:47 PM

gomer_110 Yes. 05-25-2013, 02:10 PM

Chuck33079 Good. That makes the switch a... 05-25-2013, 02:11 PM

XwChriswX When is the expected roll out... 05-27-2013, 05:24 PM

JC671 ^this..... Seems like OP... 05-27-2013, 06:25 PM

Chuck33079 Ecutek is not the op. The op... 05-27-2013, 08:07 PM

JC671 Understood Chuck. I'm... 05-27-2013, 08:24 PM

V8Killer I agree man. I am not trying... 05-28-2013, 04:00 AM

Chuck33079 There has been at least one... 05-27-2013, 08:41 PM

XwChriswX Of course, but that was on a... 05-27-2013, 09:03 PM

Baer383 My only comment is Sam tunes... 05-27-2013, 10:07 PM

JARblue Just so you guys know... VVEL... 05-28-2013, 07:36 AM

gomer_110 :iagree: I've seen the... 05-28-2013, 07:50 AM

V8Killer Are you sure VVEL or VVL? I... 05-28-2013, 08:15 AM

gomer_110 VVEL is already in there.... 05-28-2013, 08:24 AM

JARblue I thought VVEL was a newer,... 05-28-2013, 08:35 AM

elperuano Glad to see some people have... 05-28-2013, 10:49 AM

JARblue I'm not sure who these... 05-28-2013, 12:52 PM

MyKindaGuise Visconti is tuning my FI... 05-28-2013, 01:46 PM

elperuano Good luck! Definitely will be... 05-28-2013, 01:51 PM

gomer_110 Just one question, is... 05-28-2013, 02:13 PM

MyKindaGuise Not right away. I do want... 05-28-2013, 02:34 PM

elperuano I have awaited results. From... 05-28-2013, 01:47 PM

MyKindaGuise I think they went with a... 05-28-2013, 01:51 PM

JARblue First, let's be clear: no... 05-28-2013, 02:21 PM

elperuano Seems like we'll never get... 05-28-2013, 02:39 PM

MyKindaGuise Someone needs to pony up the... 05-28-2013, 02:51 PM

JARblue That's not a bad idea :tup: ... 05-28-2013, 02:54 PM

MyKindaGuise Haha it was the first I could... 05-28-2013, 03:03 PM

chrischhorn elperuano- the way you are... 05-28-2013, 03:35 PM

jofro6 I have no tune experience at... 05-28-2013, 03:48 PM

elperuano I'm not attacking ECUtek at... 05-28-2013, 04:25 PM

Dynotronics1 I have been sitting here... 05-28-2013, 04:40 PM

elperuano Huh??? I'm assuming ur joking... 05-28-2013, 04:43 PM

Dynotronics1 no I'm not joking at all,... 05-28-2013, 04:59 PM

Alstann I feel like people are pretty... 05-28-2013, 04:51 PM

Chuck33079 Other than that vvel stuff,... 05-28-2013, 04:53 PM

elperuano We didnt have VVEL tuning on... 05-28-2013, 04:58 PM

elperuano Well pretty much what others... 05-28-2013, 05:09 PM

Dynotronics1 well first off, there is... 05-28-2013, 06:09 PM

370Zsteve :tup: 06-06-2013, 01:27 PM

Chuck33079 My bad. I thought we were... 05-28-2013, 05:55 PM

gomer_110 I'm more than happy to be an... 05-28-2013, 06:02 PM

Mr.Squeeze I give you credit for wanting... 05-28-2013, 07:12 PM

Chuck33079 Maybe beta was the wrong... 05-28-2013, 06:17 PM

elperuano Just wanted to clarify ... 05-28-2013, 06:26 PM

Dynotronics1 Well, maybe that's because... 05-28-2013, 06:46 PM

sixpax According to the the site... 05-28-2013, 06:50 PM

elperuano That's like readin a brochure... 05-28-2013, 07:05 PM

sixpax My bad, I thought you were... 05-28-2013, 07:15 PM

gomer_110 I'm well aware of these other... 05-28-2013, 08:26 PM

elperuano Thanks for the clarity. Didnt... 05-28-2013, 06:56 PM

XwChriswX So... Again I ask, since I... 05-28-2013, 08:49 PM

XwChriswX Let's try this for a 3rd... 06-07-2013, 02:31 PM

JARblue I'm not sure anyone here has... 06-07-2013, 02:53 PM

XwChriswX That's awesome that it will... 06-07-2013, 03:04 PM

More replies below current depth...

SS_Firehawk Sooo.... GTM is giving buyers... 05-28-2013, 09:18 PM

sixpax Indeed. :tup: 05-28-2013, 10:00 PM

gomer_110 It'll be pretty interesting... 05-28-2013, 10:07 PM

de_dust it is pretty interesting...... 05-29-2013, 12:06 AM

Chuck33079 And it means that we'll have... 05-29-2013, 08:52 AM

SS_Firehawk I mentioned to Mike when I... 06-04-2013, 03:34 PM

Baer383 When I talked to Sam about... 06-04-2013, 03:43 PM

luigi90210 Any tuners in the San Diego... 06-03-2013, 10:19 PM

Dynotronics1 just call me, and we can take... 06-04-2013, 09:07 AM

luigi90210 will do, PM'd 06-04-2013, 02:22 PM

Alkatraz I have to say that I am... 06-04-2013, 03:51 AM

puckshaw I'm going with Ecutek for my... 06-04-2013, 09:11 AM

Z eliminator Will there be launch contorl... 06-04-2013, 09:22 AM

BigT Did you change your torque... 06-06-2013, 12:23 PM

MyKindaGuise Well everyone. I am not sure... 06-06-2013, 10:05 AM

Dynotronics1 if your talking about us, it... 06-06-2013, 11:56 AM

MyKindaGuise Fair enough. I will move this... 06-06-2013, 12:56 PM

diddy535 Any tuning options near St.... 06-06-2013, 04:31 PM

Dynotronics1 sure, just give us a ring and... 06-06-2013, 06:37 PM

elperuano What about tuning from a... 06-07-2013, 03:27 PM

Dynotronics1 "When can we (as end users)... 06-07-2013, 06:37 PM

XwChriswX Yes, this is what I am asking... 06-10-2013, 09:56 PM

Dynotronics1 you keep asking me the same... 06-11-2013, 09:55 AM

SouthArk370Z You have the patience of Job.... 06-11-2013, 10:05 AM

XwChriswX Yes, I keep asking because... 06-11-2013, 09:47 PM

Dynotronics1 We dyno tune every day. And I... 06-07-2013, 06:54 PM

puckshaw Are the above features... 06-07-2013, 03:29 PM

diddy535 Seems like a lot of etunes vs... 06-07-2013, 03:39 PM

elperuano Ok. Jus not making sense. U... 06-07-2013, 04:04 PM

gbrettin What I took from JARblue was... 06-07-2013, 04:10 PM

JARblue :tiphat: 06-07-2013, 04:17 PM

XwChriswX That's to be expected from... 06-07-2013, 04:17 PM

JARblue Pay someone to do that and... 06-07-2013, 04:23 PM

XwChriswX No worries sir, not trying to... 06-07-2013, 04:28 PM

elperuano :icon18:Lol 06-07-2013, 04:15 PM

JARblue work getting the way of... 06-07-2013, 04:22 PM

draper so, elperuano and xwchrisx... 06-07-2013, 04:28 PM

XwChriswX Umm, actually I think I've... 06-07-2013, 04:35 PM

elperuano I'm not bending over for... 06-07-2013, 04:37 PM

Hotrodz IMHO I really don't see this... 06-07-2013, 08:21 PM

elperuano Hotrodz nailed it. Just... 06-07-2013, 10:05 PM

DarkJak I looked at the adjustable... 06-08-2013, 05:22 AM

gomer_110 The fan settings are in... 06-08-2013, 01:32 PM

diddy535 Any word on flatfoot shifting... 06-10-2013, 02:02 PM

Dynotronics1 if all gos well, and as we... 06-10-2013, 02:21 PM

diddy535 Cool. Any idea on a timeline... 06-10-2013, 02:34 PM

Dynotronics1 Best I can tell you is soon. 06-10-2013, 04:19 PM

elperuano ^thissss. Exactly what I... 06-10-2013, 11:27 PM

XwChriswX http://cdn.memegenerator.net/i... 06-10-2013, 11:42 PM

diddy535 They can also etune you as... 06-11-2013, 01:28 AM

sixpax Personally I could care less... 06-11-2013, 05:08 PM

Coon-azz I would say that if this is a... 08-10-2013, 05:12 PM

fxroar This. I don't know about you... 08-10-2013, 09:25 PM

puckshaw I'll ask again. Are the above... 06-12-2013, 07:45 AM

Dynotronics1 The race rom patch we have... 06-12-2013, 09:04 AM

puckshaw Thanks for the response :tup: 06-12-2013, 09:05 AM

Alstann This is awesome news - you... 06-12-2013, 09:07 AM

Dynotronics1 having calibrated with pretty... 06-12-2013, 09:30 AM

MacLean :icon18: :iagree: I will... 06-12-2013, 08:36 AM

Dynotronics1 I have made this offer... 06-12-2013, 08:58 AM

Alstann I'm assuming when the MHI TT... 06-12-2013, 08:51 AM

Chuck33079 That's what I'm waiting for.... 06-12-2013, 08:55 AM

Alstann Haha, I hear you. I'm... 06-12-2013, 09:04 AM

Hotrodz I have UpRev all read... 06-12-2013, 11:30 PM

V8Killer Depends on the set up. For me... 06-13-2013, 09:15 AM

Hotrodz Very true...yep there is no... 06-13-2013, 02:20 PM

Chuck33079 There's three things I want... 06-13-2013, 09:18 AM

Dynotronics1 We can do everything your... 06-13-2013, 09:48 AM

Chuck33079 Any guesstimates on when... 06-13-2013, 09:50 AM

puckshaw Can someone explain how... 06-13-2013, 10:57 AM

Chuck33079 My guess would be based of... 06-13-2013, 10:59 AM

Sh0velMan So because they re-write the... 06-13-2013, 11:19 AM

gomer_110 :iagree: This is the same... 06-13-2013, 11:24 AM

Chuck33079 Sounds about right. I'm... 06-13-2013, 11:31 AM

Spikuh This is basically my... 06-13-2013, 11:32 AM

Hotrodz Will this be as effective as... 06-13-2013, 02:23 PM

Spikuh Baring some unsolvable... 06-13-2013, 02:51 PM

Dynotronics1 far more so, simply because... 06-13-2013, 03:29 PM

puckshaw It makes perfect sense once... 06-13-2013, 12:14 PM

gomer_110 fwiw, the "retasking" of the... 06-13-2013, 12:51 PM

Chuck33079 Will it allow peak boost to... 06-13-2013, 03:55 PM

visconti Because it won't be hard... 06-13-2013, 04:02 PM

Chuck33079 Well, that seals it for me.... 06-13-2013, 04:06 PM

theDreamer Let me see if I can twist... 06-13-2013, 05:06 PM

elperuano :icon18: 06-13-2013, 04:17 PM

Hotrodz Guys thank for the... 06-13-2013, 07:05 PM

visconti No Problem 06-13-2013, 09:50 PM

Hotrodz Okay, I do have one last... 06-13-2013, 11:16 PM

visconti Cars are equipped with... 06-13-2013, 11:21 PM

Hotrodz Yep...I would say so! The... 06-13-2013, 11:47 PM

Chuck33079 Exactly. I was considering... 06-14-2013, 06:16 AM

Hotrodz Yep...what about a 3" exhaust... 06-14-2013, 08:36 AM

Mr&Mrs Where is the closest tuner to... 06-14-2013, 07:17 AM

Dynotronics1 You can contact Visconti, or... 06-14-2013, 07:56 AM

Chuck33079 I've got both of those... 06-14-2013, 08:48 AM

Hotrodz That very cool...I keep... 06-14-2013, 02:41 PM

visconti Ecutek will bring us all joy... 06-18-2013, 01:49 AM

derraj06 I've been scanning this... 07-09-2013, 10:01 PM

PaperClip

MyKindaGuise Guess I should post... 07-15-2013, 07:00 PM

Chuck33079 Sweet! Looking forward to... 07-15-2013, 07:10 PM

Nixlimited Seconded. :tup: 07-15-2013, 07:17 PM

puckshaw Awesome! Keep us posted. 07-15-2013, 08:30 PM

Hotrodz Congrats....I'm kind of tired... 07-15-2013, 09:25 PM

elperuano Definitely in now.... 07-15-2013, 10:14 PM

warpeacelove However as Uprev has it, I... 07-17-2013, 03:26 PM

7speed Question... would any of the... 08-05-2013, 07:23 AM

Nixlimited Or the ability to reset the... 08-05-2013, 10:46 AM

MyKindaGuise Pretty sure John has a thread... 08-05-2013, 10:49 AM

theDreamer Not sure that will be... 08-05-2013, 10:49 AM

Sh0velMan so far as I know, the... 08-05-2013, 10:52 AM

Felix 808 If you are talking about the... 08-10-2013, 01:04 PM

JARblue I remember reading an Edmunds... 08-05-2013, 11:00 AM

MyKindaGuise Tuning AND Dynoing tomorrow... 08-08-2013, 06:42 PM

Mr.Squeeze I say B. Jon his a great... 08-08-2013, 07:30 PM

MyKindaGuise Haha I wasn't doubting his... 08-08-2013, 07:32 PM

MyKindaGuise Made 400whp 350lb tq on 8lbs.... 08-09-2013, 10:49 PM

MyKindaGuise Just got home from the 3 hour... 08-10-2013, 05:03 AM

G37Sam These are some solid numbers,... 08-10-2013, 12:05 PM

MyKindaGuise Trying to get one now.... 08-10-2013, 12:33 PM

puckshaw Any updates on availability... 10-01-2013, 08:13 PM

Seb@SZ Not yet, I am working with... 10-01-2013, 08:48 PM

Hotrodz Great results!!! 10-01-2013, 09:04 PM

ANMVQ Still wondering why there are... 10-22-2013, 09:40 AM

seymore4 +1 Also just FYI there... 10-22-2013, 09:57 AM

snowsurfdirtx link to this please? :tup: 10-22-2013, 12:08 PM

AlphaSnacks I can confirm this. I got a... 10-22-2013, 12:12 PM

seymore4 no link yet, just an email... 10-22-2013, 12:17 PM

PaperClip

ANMVQ Still nothing guys I did... 11-06-2013, 08:05 AM

Sh0velMan Could easily be dyno... 11-06-2013, 08:10 AM

ANMVQ Yea thanx man, same dyno !... 11-06-2013, 11:24 AM

carlitos_370z great!!! i think the tunner... 11-06-2013, 12:06 PM

ANMVQ Make sure he's knows how to... 11-06-2013, 01:16 PM

carlitos_370z of course im going to check... 11-06-2013, 01:29 PM

Dynotronics1 Ok, sitting here at SEMA with... 11-06-2013, 02:34 PM

scionide Custom traction control... 11-06-2013, 04:21 PM

takjak2 Do they really? 11-06-2013, 07:18 PM

luigi90210 speed density and launch... 11-06-2013, 09:10 PM

carlitos_370z very very interested on... 11-07-2013, 05:23 AM

More replies below current depth...

Infamous Where are you guys?? 11-07-2013, 03:45 PM

More replies below current depth...

ANMVQ Make sure he's knows how to... 11-06-2013, 01:16 PM

ANMVQ Can't wait to hear more ! 11-06-2013, 06:23 PM

Infamous Ah, thought you guys were at... 11-07-2013, 04:41 PM

visconti Hey Guys I'm not getting... 11-20-2013, 10:31 PM

visconti Guy please check out our... 11-29-2013, 03:45 PM

G37sHKS Please PM your contact info... 12-05-2013, 10:08 AM

carlitos_370z sorry for ask this but....... 12-05-2013, 11:24 AM

visconti Yes.. I work* closely with... 12-05-2013, 12:59 PM

carlitos_370z great!! and yes is close to... 12-05-2013, 01:12 PM

nissan_fan carlitos_370z, if you go to... 12-05-2013, 01:58 PM

carlitos_370z No problem dude i let you... 12-05-2013, 03:32 PM

Chuck33079 Does Ecutek allow fueling to... 12-05-2013, 03:35 PM

visconti EcuTek can do both :) ... 12-05-2013, 03:37 PM

Chuck33079 Very nice. That's a point... 12-05-2013, 03:39 PM

visconti I guess, the big selling... 12-05-2013, 06:26 PM

Chuck33079 Well, other than timing there... 12-05-2013, 06:28 PM

Holy What exactly is timing... 12-05-2013, 06:45 PM

Seb@SZ EcuTek has given us the... 12-06-2013, 10:25 AM

Holy So it essentially makes it... 12-06-2013, 10:47 AM

Chuck33079 Timing makes a difference... 12-06-2013, 10:51 AM

More replies below current depth...

370Z JT Seb, are you doing Ecutek... 12-06-2013, 12:40 PM

shivers Yes he is. SZ ECUTek Tuned... 12-06-2013, 01:13 PM

scionide So now that it's December,... 12-09-2013, 02:59 PM

visconti New features are being tested... 12-09-2013, 03:00 PM

jrb55gh Different tunes for bank 1... 01-04-2014, 10:09 PM

visconti Alright Just got off dyno... 01-17-2014, 04:01 PM

Megan370z :stirthepot: I feel it's... 01-17-2014, 04:52 PM

XwChriswX Forgoing the differences... 01-17-2014, 04:57 PM

visconti I'm going to let the customer... 01-17-2014, 06:17 PM

jlo370z I am leaning toward... 01-17-2014, 05:23 PM

visconti I have dynosheets on the... 01-17-2014, 06:16 PM

scionide So I was over on the frs/brz... 01-22-2014, 07:11 PM

visconti Ecutek is trying it out on... 01-22-2014, 07:12 PM

scionide Ahh ok, well I'm glad to see... 01-22-2014, 07:19 PM

G37sHKS There.. Any update about the... 01-22-2014, 09:08 PM

visconti Getting very close There's... 01-22-2014, 09:13 PM

G37sHKS Just curious how many G37 and... 01-22-2014, 09:16 PM

elperuano Very impressed with the way... 01-22-2014, 09:25 PM

visconti Only a few, you build is... 01-22-2014, 09:44 PM

warpeacelove Hello Fellow Members, I... 01-24-2014, 01:38 PM

visconti I talk directly to the dev... 01-24-2014, 02:09 PM

SS_Firehawk Does this mean it will fix my... 01-24-2014, 02:57 PM

visconti No, that's on the to-do list... 01-24-2014, 03:04 PM

G37Sam John, is the software itself... 01-25-2014, 02:08 PM

visconti No I'm sorry, what are you... 01-25-2014, 02:11 PM

redline10000 Any updates on this at all?... 06-11-2014, 09:02 PM

scionide "It's being worked on still"... 06-12-2014, 01:50 AM

DEpointfive0 There's NO reason for ECUTek... 06-12-2014, 09:38 AM

jwick Sad but probably true. It's... 06-12-2014, 10:48 AM

jofro6 yup definitely sux. I took... 06-12-2014, 11:19 AM

jwick Its only one map? 06-12-2014, 11:43 AM

jofro6 Isnt it still only just one... 06-12-2014, 11:44 AM

DEpointfive0 Yep, still 1 map. ... 06-12-2014, 01:35 PM

jwick That's crap...Glad I already... 06-12-2014, 01:56 PM

jwick That was just a question. I... 06-12-2014, 12:20 PM

redline10000 Guess I will just save up for... 06-12-2014, 02:09 PM

scionide Even though our platform is... 06-13-2014, 11:31 AM

tiger123 Guys, Ecutek is far from... 06-13-2014, 02:33 PM

seymore4 ............:bowrofl: 06-13-2014, 02:44 PM

scionide Tiger I had the same level of... 06-13-2014, 02:57 PM

jrb55gh Your mods may be the issue... 06-15-2014, 09:01 PM

warpeacelove @Visconti you've any... 06-16-2014, 03:42 PM

Jordo! I have a theory: If ECUtek... 06-26-2014, 02:55 PM

arnoldas Is it too late to return this... 06-23-2014, 12:05 PM

scionide You'll have to ask to see if... 06-23-2014, 05:45 PM

arnoldas ill give it a try, it seems... 06-25-2014, 12:12 AM

scionide There may be hope for us... 06-26-2014, 12:36 PM

redline10000 This is great news. When they... 06-26-2014, 01:46 PM

BBRSpeedWorks any word when there letting... 08-20-2014, 10:25 PM

visconti Hey guys, sorry I haven't... 06-26-2014, 12:51 PM

NickD Cant wait. John, Let me... 06-26-2014, 01:58 PM

Juan@Fontana This is pretty exciting, this... 07-11-2014, 01:39 PM

dP3NGU1N I'll believe it when I see... 07-11-2014, 01:49 PM

6MT-Z34 Just curious..do you work in... 07-11-2014, 01:57 PM

SouthArk370Z :roflpuke2: Engineers... 07-11-2014, 02:03 PM

brancky3 I was going to say a Project... 07-15-2014, 11:51 AM

dP3NGU1N Out of curiosity, why... 07-15-2014, 01:03 PM

NickD Update??? 07-15-2014, 11:16 AM

NickD Anything on this??? 07-21-2014, 03:34 PM

scionide MIGHT see something end of... 07-22-2014, 12:53 AM

1slow370 Shhhhhhhiiiiiii how many... 07-24-2014, 03:10 PM

Plasmite http://www.youtube.com/watch?v... 07-25-2014, 01:16 PM

1slow370 ^ gold medal to you sir, my... 07-25-2014, 06:28 PM

falconfixer Where have I heard these... 07-25-2014, 06:35 PM

1slow370 hopefully it wasnt the woman... 07-25-2014, 10:57 PM

visconti Sorry guys, I'm working with... 07-29-2014, 10:48 PM

NickD PMd! :tup: 07-30-2014, 01:06 PM

ANMVQ No I still think they rather... 08-21-2014, 07:11 AM

scionide Zero updates on the 370... 08-21-2014, 01:52 PM

BBRSpeedWorks I was about to sell my uprev... 08-21-2014, 01:45 PM

seymore4 Nobody's even going to have a... 08-22-2014, 10:47 AM

1slow370 This reminds me of the south... 08-22-2014, 11:20 AM

thompsontechs "He's dead Jim" 08-22-2014, 11:27 AM

ANMVQ "There's no coming back, This... 08-22-2014, 12:07 PM

NickD I'm talking to Visconti right... 08-28-2014, 09:01 AM

seymore4 I'm sure they will be happy... 08-28-2014, 09:12 AM

NickD Take my money for what??? I'm... 08-28-2014, 12:31 PM

seymore4 Well I certainly hope it... 08-28-2014, 06:18 PM

More replies below current depth...

jofro6 I am the other car in talks... 08-28-2014, 04:56 PM

chknhawk Ecutech for sale. Very... 09-21-2014, 02:42 PM

Masterbeatty Wow I forgot about ecutech. I... 09-25-2014, 09:31 PM

scionide Well I wouldn't say they... 09-25-2014, 09:49 PM

ANMVQ I honestly think they are BS,... 09-26-2014, 07:04 AM

dP3NGU1N And another 3 months have... 09-26-2014, 01:01 PM

Chuck33079 When people are talking about... 09-26-2014, 01:03 PM

SouthArk370Z You may be right. A quick... 09-26-2014, 01:27 PM

ANMVQ Mine was with really the... 09-26-2014, 02:36 PM

scionide Update on my situation. I've... 10-03-2014, 05:51 PM

tiger123 Here is something interesting... 10-15-2014, 04:19 PM

SouthArk370Z If you have some way to... 10-15-2014, 05:07 PM

Jordo! If you've already invested... 10-15-2014, 07:09 PM

scionide Tiger, do you have your own... 10-16-2014, 03:04 AM

tiger123 Yes, I do have the cable. ... 10-17-2014, 09:16 AM

1slow370 I vote we change the name of... 10-16-2014, 06:25 PM

chknhawk I guess that's the thing I... 10-16-2014, 08:47 PM

scionide Oh mention Max, I don't know... 10-17-2014, 11:17 AM

cuseZ Just recently got a 2014... 10-17-2014, 11:32 AM

Chuck33079 You must not have read the... 10-17-2014, 12:01 PM

jwick :iagree: 10-17-2014, 12:07 PM

cuseZ Lol...I did...I just really... 10-17-2014, 12:15 PM

jrb55gh I bought an etune and cable... 10-24-2014, 10:46 AM

SouthArk370Z This thread was started a... 10-17-2014, 12:45 PM

visconti Just wanted to clear a few... 10-17-2014, 02:39 PM

SouthArk370Z Thank you. You are a... 10-17-2014, 04:21 PM

visconti Sure seems hard to make you... 10-17-2014, 05:13 PM

More replies below current depth...

scionide Sadly by the time the... 10-17-2014, 02:11 PM

visconti It's been a while since I've... 10-17-2014, 02:32 PM

Masterbeatty Shoot, if its free and i can... 10-19-2014, 12:04 PM

Chuck33079 John, Where do they stand... 10-17-2014, 02:40 PM

visconti It's in the software, it can... 10-17-2014, 02:48 PM

jwick It can be done on a 370Z/G37... 10-17-2014, 02:59 PM

visconti It can be setup a few... 10-17-2014, 03:09 PM

Mitco39 Since its brought up, can I... 10-17-2014, 03:00 PM

visconti They offer end user tuning on... 10-17-2014, 03:10 PM

Mitco39 If thats the case I think it... 10-17-2014, 03:41 PM

1slow370 So to confirm the boost... 10-17-2014, 04:12 PM

1slow370 This? 10-17-2014, 05:18 PM

1slow370 So for the third time, what... 10-17-2014, 07:53 PM

bullitt5897 John, Would you mind... 10-20-2014, 06:55 PM

cuseZ This is entertaining and... 10-17-2014, 08:22 PM

SouthArk370Z :rofl2: Having Visconti as a... 10-17-2014, 09:02 PM

warpeacelove Go with Uprev Bro. 10-17-2014, 10:13 PM

visconti I have more than one thread... 10-18-2014, 09:18 AM

Infamous I live in Vegas. Wanna tune... 10-20-2014, 03:08 AM

visconti I already have a few people... 10-20-2014, 09:29 AM

Infamous Email sent. 10-20-2014, 05:45 PM

visconti It's everything I have... 10-21-2014, 10:44 PM

2011 Nismo#91 A short list of what was... 10-22-2014, 10:40 AM

visconti Extended Engine Load... 10-22-2014, 03:07 PM

1slow370 :tup: there we go a good... 10-22-2014, 04:18 PM

redline10000 Got any examples of the the... 10-22-2014, 09:02 PM

Mr.Squeeze Is rolling launch going to be... 12-10-2014, 10:38 PM

bullitt5897 That's 22+ pages of parsed... 10-22-2014, 10:34 AM

1slow370 so to summarize the summary, ... 10-22-2014, 11:36 AM

Juan@Fontana why so bitter about it? 10-22-2014, 12:04 PM

1slow370 Im not bitter it just is... 10-22-2014, 12:11 PM

scionide Hey visconti, I'll be at SEMA... 10-22-2014, 03:41 PM

visconti Yes Please come to... 10-22-2014, 05:49 PM

BBRSpeedWorks i want all that 10-22-2014, 06:58 PM

visconti You mean this? ... 10-22-2014, 07:05 PM

BBRSpeedWorks give us some more pics 10-22-2014, 08:01 PM

visconti That's all for now. 10-22-2014, 08:11 PM

BBRSpeedWorks Now what about a tuner... 10-22-2014, 09:05 PM

visconti It has been talked about. ... 10-22-2014, 09:36 PM

reldas sorry dont have a chance to... 11-03-2014, 08:29 PM

mag_black I don't think anything is... 11-05-2014, 09:37 PM

1slow370 uprev tuner is end user... 11-06-2014, 11:19 AM

jofro6 Ecutek is not end user... 11-06-2014, 06:54 AM

reldas thats really kinda sad to be... 11-06-2014, 09:10 AM

reldas its stupid that the FT86/BRZ... 11-08-2014, 11:27 PM

visconti Just how it is , sorry! 12-10-2014, 12:18 AM

visconti At this moment no. But it... 12-10-2014, 10:39 PM

Mr.Squeeze Ok John thanks for the update... 12-10-2014, 11:50 PM

Infamous I guess it's safe to say,... 03-22-2015, 10:41 AM

JARblue What makes you say that? ... 03-22-2015, 01:34 PM

Infamous Thanks! This thread has been... 03-22-2015, 05:36 PM

JARblue No prob :tiphat: There is... 03-23-2015, 07:54 AM

theZspot Posted in the other two... 03-23-2015, 02:02 PM

warpeacelove Sh+T I might pull down my... 07-24-2014, 12:42 PM

ANMVQ I'd probably still sell in ,... 07-24-2014, 01:22 PM

Old

05-22-2013, 09:58 AM

#1 (permalink)

V8Killer

A True Z Fanatic

Join Date: Feb 2011

Location: Newport, NC

Posts: 1,127

Drives: It Hard Till It Pops

Rep Power: 17

V8Killer is on a distinguished road

Default

Quote:

Originally Posted by visconti

View Post

Not on the 370Z platform, but with the GTRs

It might be best that you wait until we have map switching and a few other things

-John

What other things are you referring to? Also what kind of time frame are we talking about on the map switching?

__________________
"Punch"

Too much to list and a baby shot of nitrous....

V8Killer is offline

Reply With Quote

Reply

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan corp. news release about 370Z	admin	Nissan 370Z General Discussions	17	07-06-2011 05:17 AM
Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	02-21-2011 07:38 AM
Official Release of Nissan 370Z @ NissanUSA.com	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	6	11-19-2008 08:32 PM

All times are GMT -5. The time now is 02:55 PM.